Jay Fisher - Fine Custom Knives

New to the website? Start Here
"Falcate" Chef's, slicing, carving, trimming, utility knife in T3 cryogenically treated ATS-34 high molybdenum martensitic stainless steel blade, 304 stainless steel bolsters, Majestic Agate gemstone handle, stand of zebrawood and ash hardwoods, base of Baltic Brown Graniite
"Falcate"

Testimonials, Letters, and Emails on www.jayfisher.com

From one of my best clients:

I am sick; your knives are the salve for my affliction.
Keep my meds coming... feed my addiction. You enabler. <smile>


Customer, client, and patron feedback is critically important, and the testimonials submitted can tell you a lot about how I conduct my business, trade, service, and art.

Testimonials, Examples, and Correspondence

It's important to include some of the email and correspondence I receive at jayfisher.com. On this page, I've included examples of letters, questions, inquiries, and responses along with some worthwhile commentary. I've also included some of the emails that I get concerning my website and knives to honor those who took the time and effort to email me, while expecting nothing but to pass on their good wishes and kindness. I've also included several hundred testimonials to give you a glimpse of what I consider the greatest honor to offer in the service of making fine knives, swords, and works of art.

I realize that this is a very large page, so feel free to bounce around to get an overall flavor of the art and conversation. When you've been doing this for as many years as I have, there simply is no short, concise, and brief way to illustrate the many facets of this art.

Knife making and knife selling go hand-in-hand, and every knife made, purchased, and delivered starts with words and ideas. The knife making conversation is integral to the creation of the piece, and in order to be successful, the knife maker must be comfortable with the language and description of the art, even if the knife client is not. This page should offer some ideas of how that conversation takes place, or if it does at all.

Most of the public that is not familiar with fine knives has limited and somewhat fixed ideas of what constitutes a fine knife. From early on I realized that a great deal of this profession is education, since knives can be a very refined and detailed field.

You'll see a lot of boxes on this page but there are only three types:

Emails

Quotations

Testimonials

Some important points:
  • Please do not use the quoted prices in the emails on this page as a current guide. Some of these emails are several years old, and the costs of materials, supplies, shipping, and knife making has increased.
  • The emails and testimonials are not in chronological order, so where they appear on this page is no indicator of when the were written. I like to mix it up.
  • Since some of these emails are older, there may be additional information available, new processes, and in some cases new materials like steels, abrasives, and fittings that were not available at the time of the email.
  • Some of these emails date from a time when I answered lots of questions that did not apply to a direct knife order. Unfortunately, I can not answer general questions anymore, due to the huge amount of web site traffic I have to deal with, and only currently answer emails that are about knife orders.
  • The letters and submissions below have been edited for appropriate content, spelling, and punctuation. Email is often casual, and sometimes needs to be corrected for readability.
  • You might see some asterisks which have replaced information which is critical or private.
  • I've included a few proverbs and words of wisdom where appropriate.
  • I've also included many testimonials from clients, supporters, and enthusiasts. Customer, client, and patron feedback is critically important, and the testimonials submitted can tell you a lot about how I conduct my business, trade, service, and art. For their privacy, I don't' use their name unless they approve or request it.
Humorous comments about testimonials

My name popped up on a Reddit comment titled: "Jay Fisher- Is he the Real Deal?" The original poster made this comment,
"There are so many testimonials on his site it makes me feel like he is trying to convince me that the information is good, however, I think good information should speak for itself."

If you read this website, I mean really, really read it, you'll be very clear on whether I'm the "real deal" or not. I don't know what constitutes the "real deal" definition of a full time professional career knifemaker—I've simply made knives for over 40 years and have been a full time professional career knifemaker for over 30 years at the time of this writing. Is that the "real deal" or is it some illusion driven by suspicious intent, carefully luring victims into misinformation and trickery? If so, what would be the reason for a guy who makes and sells knives to perform some nefarious activity by spreading falsehoods?

The poster of this comment claimed he was reading my "Heat Treating and Cryogenic Processing of Knife Blade Steels" page, one of the more popular pages on my site. Like some other pages on my site, I've included a sprinkling of testimonials throughout the topics of the heat treating page.

I do this because I'm very proud of what I do and want to acknowledge others who appreciate what I offer. They have been kind enough to write me and give me permission to post their comments. My hope is that people who read these testimonials would understand that others appreciate what I do, even if anonymous posters on Reddit do not.

If the guy reading the information isn't sure if the "information is good," then a testimonial won't convince him of this. What testimonials do for most people is give them an insight into what appreciation exists from other readers and specifically, customers and clients.

If the poster thinks that there are too many testimonials on my Heat Treating page, I hope he never wanders to this page. Here, he'll see hundreds and hundreds of actual testimonials written mostly, but not always, by clients, since some of the writers have never purchased a knife from me. In reading through these, it's easy to see who is a client and patron, and who is simply graciously offering support and thanks.

Every one of these testimonials and comments means something very special to me; they are all I really keep from a knife transaction or a conversation about knives. I don't keep the knives; they are sold and gone and I'll probably never see them again. The money I make from knife sales is quickly tilled back into the business and projects, or is used for living and is quickly and easily spent. The photos are a nice treat for my own memory of the piece, but the words—real words from clients and others who appreciate what I offer here—mean more to me than I can measure. This is why I share them with you, the reader.

I don't need to convince anybody of anything; I'm certain of my place and history in the knife world. But every word offered in appreciation is personal and meaningful, and can reach past simple presentation into the context of knifemaking. What is that context? I make knives for others, and in reading these testimonials, you'll see why.

Thanks for your time.


Tom Clancy is a name that many recognize. Tom was a friend and patron of mine, a great guy who was extremely well-versed in military history and process, and one of the greatest authors who ever lived. While the younger generation may recognize his name in the gaming and simulator field, his mastery of words, ideas, and literature was the absolute pinnacle of his genre. He wrote about many of the world's cold war and post-cold war military hardware, and I was hugely honored to have my work in his home, in his library, and as the inspiration for charitable causes. It is because of Tom that I have a piece in the Tower of London, perhaps the finest weapons museum in the world. In 1994, this is what he wrote about me and my work:

"You know, I never believed in decorous weapons until I met Jay Fisher. Where does one draw the line between a fighting knife and a work of art?

Jay Fisher is a throwback to the age when craftsmen were *all* artists, not mere producers of products, when every item that went out the door had a story and a purpose all its own, and when you went to a craftsman not because of what you wanted but because of who he was.

Jay is a guy who knows how to use the modern to serve the past. We really do make better steel today than we did a hundred years ago - the idea of cutting an ancient Samurai sword in two with a modern American knife does have its attractions - and the blend of old and new in his work is totally seamless. A knight Templar would not have hesitated a moment to take Fisher's steel on his Holy Quest. In fact, he would have thought the technological edge a gift from an especially attentive God.

I suppose that says it all. Jay Fisher is one of a kind, a man who knows the riddle of steel, and that the difference between a good weapon and a bad one is the combination of how you make it and to whom you give it."

--Worldwide best selling author Tom Clancy, 1994


"Leonardo da Vinci was one of the greatest artists humanity has produced. His power derived from a mastery of Science and Technology together with a magic intuition. He is still alive. I met him. He lives in New Mexico. His name is Jay Fisher."

--Jean-Louis Lassez, Ph.D.


Jay,
First, MERRY CHRISTMAS!
K. absolutely loves the knives and sculpture! She marveled at the balance and said each knife felt like a part of her hand and wished she had them for use preparing Christmas dinner last night. She recognized it immediately as an incredible work of art.
We both thank you from the bottom of our hearts for your “Labor of Love” – it shows in every detail.
Jay, you know I am a knife collector and have large collections of Loveless and Moran knives among many others. I have told many of the people in the knife world I deal with that you are the finest working knife maker in America. So many today are “Copycats” trying in vain to make a Drop Point Hunter or Damascus Fighter, rather than create from within themselves as you do. Keep it up and continue to be true to yourself.
With our warmest wishes,

K. and L. B. and Family


Jay,
I hope you never get tired of all the superlatives your customers and collectors heap upon your work-they are all well-deserved in my experience! I have spent literally hours looking at the photos you provided, and I had become progressively more excited about seeing the actual knives and presentation displays the longer I studied them. I appreciate the exposition with the photos which details the time periods leading to the formation of the gemstone in the handles; that provided context for the knife names and got me to thinking about how the sculptures “hit” me. I suppose, like any works of art, everyone will see something different in these sculptures. For me, the Mesabi sculpture brings to mind the fire prevalent in a cooling earth, and the Toroweap sculpture captures the solidity of the stone after thousands of years of compression.

The knives and sculptures arrived today. Thank you for getting them here so quickly. Your pictures are wonderful, but having the knives and sculptures in my home gives me a much better appreciation for the master craft which you have created. I love the way the engravings on the knives reflect the sculptures, and the finish on the blades and handles is flawless. I can’t imagine how you achieve that.

You have made me something which I will treasure, and which I expect my children will treasure long after I’m gone. My thanks are far too little as recompense for the effort you have made on my behalf, but you have them nonetheless. Thank you for bringing to life the vague notion of juxtaposition I had when we first discussed this project in such a novel and artistic way.

--H.



I thought about what i must write in this letter for 7 last years.
Mr. Fisher, you have been my teacher, inspired and role models at all that time. For anyone who wants to learn how to make a finest knives, just need to read read and again read your web site. Encyclopedia of knives! 8 years have passed since as I started studying and learning on your web site. Thanks for your titanic work! Thank you for your web site, a place where you disperse many myths about the knife making reality! I look forward for date of publication your book, your book for me is the most cherished dream.
I wish you a long life, God bless you for your work.
Best regards

--Igor Pozdniakov


The pictures are astounding. I am amazed by your talents - design and make sculptures, work gemstone (which is HARD to do well), photography, web site creation (which is EASY to do badly, as the entire internet demonstrates), and bladesmithing, of course.

Thank you for making and selling such fine knives. In a world full of 'cheap crap' it is refreshing to find those who are not bottom-fishing the market, but aiming for the best that the hand of man can do.  Men such as you.

--R. N.


"Jay Fisher is the best modern knife maker around, pursuing an ancient tradition but beautifully perfecting the craft by selecting the finest man-made and natural materials. Jay Fisher makes every type of edged steel weapon, fitting the blade to it’s purpose. The world’s elite clandestine rescue and tactical squads seek his weapons. Their lives depend on Jay Fisher Custom Knives- the best quality knives in the world."

--Bernardo M. Perez
Deputy Assistant Director - Ret.
FBI Laboratory
Washington, D.C.

Jay
I have been looking at your website and I thought it appropriate to complement you on maybe the most comprehensive website of its kind in the world and some of the most beautifully crafted knives I have ever seen!
My son is a young knifemaker (18) and you are an inspiration to us both.
Regards

Tinus and Magnus Stone, South Africa


Jay Fisher,
I have been reading your site with great interest for several days. I am convinced that you may indeed be the best knife maker in the world. I have tried through Google and internet searches to find another knife maker who thinks they are your equal. I have found none. There are many people on the internet who seem intent on bringing you down. My opinion of you remains unchanged. I have decided to begin saving for a Jay Fisher knife because I feel that in the future it will be an historically significant piece of American history.

Regards,
--M. R.


Mr. Fisher,
A very long time ago, I was laughing with a smile on my face. The young lady I was with asked me if I was laughing at her. I honestly told her that I was laughing with pure joy. I’m sure if you listen carefully, you can hear my joyous laughter all the way there in New Mexico. I’m smiling, too. Both of them are stunning! The handle scales are exquisite! I was very curious about the Kaleidoscope Stone, because I’ve never heard of it before. Being an Opal freak, I consider it an exceptional choice. Also, I can’t wait to gaze into the depths of the Bay of Fundy agate!
 Did I mention that I’m stoked? And the prises are better than I hoped for. Can’t wait to produce some very thin slices of Ahi for our cats, and trim our rib eyes for our celebratory dinner when they arrive! I have always loved using a tool that is also a work of art for its intended purpose. Can’t thank you enough!
  Mr. Fisher,
  Yes, they came Tuesday, and are unreasonably beautiful! The Cygnus and I became best friends instantly. The Corvis is more intimidating, she is tall and slender, but I will train myself to appreciate her. I’m simply speechless at their beauty.
  Mr. Fisher, did I mention that I could use one of them to shave with, and the other one to use as the shaving mirror? Oh, and the other thing is, I bought USDA grade Choice rib eyes instead of my usual Prime grade just so I could trim more fat off! It was fun!

--S. C.


Owners of the Concordia

It’s amazing! We truly love it and it’s a beautiful piece of art! Thank you again so much! Our kids are now campaigning to get it when we die!
Thanks again!!!!

Later: We are using and loving the knife—so sharp and precise!

--M. and N. H.


Jay,
Thanks again. The PJLT arrived Safely. Very nice! The blade is gorgeous. Balance is perfect at the forefinger, and it feels weightless and natural in hand.
I have not explored the accessories yet, other than the sheath. The sheath itself is a work of art. I am very impressed. As law enforcement officer, a diver, paratrooper and avid outdoorsman, I have always sought out proper and secure carry systems. I have a few dive blades with click in and press button release systems, but they don’t come close to your sheath for security. It is a shame that I must release this blade to my Son, but he will definitely get real world use out of it. I will be revisiting for another blade.
Thank you for the time, effort and craftsmanship that you put into the knife. 

--R. in NY


Amazing. Just Amazing.

--L. A.


Hello Jay!
The knives arrived a couple hours ago and I am so stoked!! I haven't gotten to use them yet but I have a big meal to cook on Friday and will be breaking them in them. Even so, I wanted to write to you and say THANK YOU!!!!

Your thoughtfulness on every aspect of the knives, case, and prises shows. The case is fantastic and fits perfectly on our counter. I read your note and the there is no issue with the height of the feet and they look great. Each piece of wood is beautiful and I really like the black walnut accents in the dovetail joints! The prise is so cool and you definitely achieved the look of red clouds in a milky sky.

Most importantly, the knives are perfect! I am amazed by the mirror polish you achieved and the fit of every piece is astounding. The Sanchez is perfection for a utility knife. The size and shape of the blade and handle make it just right for all the various tasks outside of chopping. The pieces of red river jasper that you used in the handle for the Sanchez kind of steals the show even from the beautiful eudialite. They are such a beautiful shade of red! The Concordia is incredible and the perfect length. The eudialite in the Concordia handle is so interesting and really shows off the stone. I love the shape of the blade! It has the slightest arc so that it rocks beautifully from tip to heel which will be so nice chopping, dicing, mincing.

Holding these and seeing the culmination of your brings to mind 1 Cor. 10:31: "Therefore, whether you eat or drink, or whatever you do, do all to the glory of God." The fact that such beautiful and functional pieces of art are possible by human hands is a reflection of the image of God in man and all that He built into this world He created and continues to sustain.

Thank you again Jay!
T.


Hi Jay,
I have been following your work for so long I could hardly wait to see one of your knives in person. The Ari B' Lilah is now the pinnacle of my collection. I never doubted it would be, I was just waiting for the right knife to come up on your website for sale. I suspect very few people know just how much time, knowledge, and skill it takes to create a masterpiece like the Ari B' Lilah. I have been viewing and reading your website for years and it has given me a pretty good idea  of what it must take. 

Unlike most people at some point, I will or have used just about very knife, gun, rifle etc... that I own. Yours will be no different. I am sure it will preform every bit  as good as it looks. And the kit...wow! Very well thought out. It seems to cover just about everything one could have a need for. I am honored to finally own a Jay Fisher. And can say without hesitation it was well worth the wait.  Now I just need a few more LOL.

--G.


Hi Jay!
The knife came today!

The Cygnus EL is a beautiful knife. The Plume Agate is really extraordinary, I have never seen anything quite like it. The swirls and color remind me of the ocean. The feel in my hand is perfect with a nice weight to it that makes it feel really solid.  I am glad I got the “EL”.  The extra length is going to make it very versatile in the kitchen and the cutting jobs I will be using it for. The shape and design are very clean and sleek looking, and that edge is really sharp.

And I have to say, I do not know how you made this with such precision. At the points where it all comes together with the Agate, the bolsters and the tang I cannot feel any seam or uneven surface. This truly is remarkable craftsmanship.

This is also the first time I have ever seen a Prise. I think I am going to prefer this over a stand and certainly more than a sheath. It will keep it handy so I can just grab it when I need it and keep it and myself safe.

Thanks for a great knife Jay.

--J.

-and later:

Oh, I love it! I use it for everything. I am so bad, I will make things just so I can use it. The other day I used it to slice up some strawberries, way over kill for a simple strawberry but it was another opportunity to use it. I love that thing and I have shown it to several friends who all like it and are amazed by the plume agate handle. Thanks for making such a great knife.

Thanks,
--J.


"Cygnus EL" obverse side view in CPM 154CM powder metal technology high molybdenum martensitic stainless steel blade, T3 cryogenically treated, 304 stainless steel bolsters, Horse Canyon Plume Agate gemstone handle, hand-dyed  high strength silicone prise
Cygnus EL Chef's, Kitchen Knife

Hey Jay,
I have just spent about 4 hours on your site (just kept opening tabs with more useful information), and I'm going to have to keep this brief because I'm aware of just how many emails you must still get.
Man, what a fantastic resource your site is, how well written, how honest, how informative. Being raised in Sydney, Australia, I was raised to view weapons as tools used only by military / law enforcement, and a sign of insecurity or aggression if carried by a civilian (it's very different over here, I've never seen a knife displayed in a home, let alone carried on a person, save maybe a Swiss army knife). Becoming older however, I've revisited previous assumptions, and it's just fantastic to read about your craft, and not just your knife making, your philosophy on things, it's bringing me around.
Being an avid hiker, I'm all but sure one day I'll be emailing you with a design for my own Jay-forged knife. The only thing is, your website has created just as many questions as it solved. I've realized it's going to take me a year to even work out and express to you what I want in a knife. Although the solution of course is to have you make me a dozen knives, one for each task, since I probably still need to eat, I plan to dream up the perfect knife for the average tasks I will encounter from now till forever.
Short version: Your website is inspirational and awesome, keep doing your thing! Currently finding more work so I can be a proper Jay customer some day soon.
Kind Regards,

James Bailey


Consultation for Writers

"I am a writer currently working on a story where a character needs to be skilled in knives.  I know  next to nothing about the various types of knives and all of their intricacies, and so began my search and find of Jay Fisher's website, a true treasure trove.  If you're able to read this, you probably  are aware of just how comprehensive his website is from tactical knives, chef knives, hunting knives and everything in between.  I've been searching for information for a while and was excited to finally hit the jackpot.  Here is the thing - in addition to the wealth of information on the site, some of which left me excited but overwhelmed, Jay was the consummate professional as he responded when I reached out for help. 

He not only pointed me in the right direction as far as specific knives and tools that can be used given the time-frame, setting, etc. of my story, but he helped me think through and hone in on what I truly needed, while also providing enough information for me to think about other options. Most importantly, he provided accurate information which will, of course, make my story that much more believable.  A dream for any writer!

--L. B.


Jay,
The knives have arrived safely. I only had time right at the moment to take a very quick look. Wow. The Bordeaux just floored me, perfect. I had no idea a blade could suit my cutting preferences so well. Wow.

--R. N.


Received the knife and I am sooooo glad I pulled the trigger! Thank you for a solid knife and an easy transaction. Won’t be long before you hear from me again!

--T. T.


Jay,
I was dumbfounded when I held my counterterrorism knife and tension-lock sheath, as in ‘found dumb.’ Both the knife and sheath felt foreign in scale, weight and utility.  I realized I’d never held a defensive blade capable of defending my life, and had had a false sense of security with the automatic dagger I’d been carrying in my pocket, and my fixed blade hunting knife I own. It was like the difference between holding a baseball bat and a broom handle, for self defense. I’ve never fended off an attack, but I realized yesterday that if I’d had to, the weapon I purchased from you was an entirely superior tool, and my confidence in the other knives was completely unfounded. My grip on your knife was the first thing that struck me as so vastly superior. I was ignorant before yesterday of what type of tool I’d want and need in an actual fight. My grip on the Torvus alone made me realize what a fight-worthy handle is, and how underprepared I would have been before. It was a humbling experience. I felt I’d been dumb before — I had expected to feel excited, and was actually dumbfounded instead.  And examining the blade, feeling the weight, I realized that this blade would penetrate jackets, belts, and that the blades I had relied on before would only work if my attacker was in shirtsleeves only. I also thought that if I were to face another man with an authentic weapon like yours, I’d want nothing less than a pistol to fend him off.

What a humbling experience. There’s something almost ancient-feeling about your blade. Like a weapon from before firearms when armies depended on hand to hand combat and manual weapons. I own a genuine samurai sword, and the density and balance of that weapon is the closest comparison I’ve experienced, but I certainly didn’t expect to hold a 6” blade with the sense of heft and lethal purposefulness of that sword. I’m dumb founded, and even relieved that I discovered the difference.

Thank you,
D.


Hi, Jay.
The knife arrived safe and I really love the look and feel of it.  It fits my hand very nicely, and has excellent balance!  The fit and finish of the scales to the bolsters are really impressive, and the filework sets it off very nicely.

Thank you,
P. M.


Jay—
Picked up my knife today.  The craftsmanship of the knife and the sheath exceeded my expectations.
It will take me a day or two to get used to it.  The handle fits my hand well.  Looking forward to putting it to work. The blade grind and edge are superb.

Sincerely,
-S.


Jay,
Today I have yet another Jay Fisher knife in my collection!  The second Zeta just arrived, and I am once again awestruck by your attention to detail.  The mirror polish of the ATS34 steel seems to defy certain unrepealable physical laws of reflection, especially with the aggressive hollow grind.  Gorgeous!  And I love the detailed file work.  As a working knife, I can tell that the extended ricasso combined with the file work will give an ideal purchase and balance in the hand.  It feels like it almost wants to do the work for me. Also, fantastic choice on the green moss agate handle!  Just what I had hoped for with the fields of clear and white overlaid with green strands. Simply stunning!  And I'm glad you chose the green rayskin inlays for the sheath. What a pristine visual duo the knife and sheath make together. I could keep gushing about this knife well into the afternoon, but I mainly just wanted to say thank you once again for crafting such an amazing functional work of art for me.  I look forward to the next order with you.  Please keep up the great work!

Sincerely,
B. H.


"Zeta" fine handmade custom knife in T3 cryogenically treated ATS-34 high molybdenum stainless steel blade, 304 stainless steel bolsters, Indian Green Moss Agate gemstone handle, hand-carved leather sheath inlaid with green rayskin
"Zeta" with Indian Green Moss Agate Gemstone Handle

En primer lugar me disculpo por el idioma en que escribo pero quisiera, si es posible, que la idea a expresar contenga en lo posible lo que siento y pienso.

He leído con atención una aclaratoria que hace en su página sobre sus experiencias, estudios y no menos valiosos conceptos de lo que su trayectoria ha demostrado en lo que hace y sus retractores.

No es mi costumbre mesianizar a las personas pero considero un acto de infinita justicia el reconocimiento no solo a la excelencia sino a la humildad y los deseos por contribuir a la enseñanza que usted ofrece y promueve.

A lo largo de la historia se ha demostrado que siempre es mas fácil descalificar y destruir(siempre que se pueda)   que aprender mediante el esfuerzo y la constancia y eso, lejos de lograrlo con usted produce el efecto contrario y pone en evidencia al falso y el mediocre. Honestamente no pienso en la maldad de éstas personas sino en la incapacidad y la consecuente mediocridad.

Desde hace mas de diez años he seguido con atención su trabajo y sus progresos, creo haber mencionado alguna vez como admiro la unión familiar que usted tiene y el notable ambiente que se respira en su estudio-taller. Aunque es todo un espectáculo tecnológico y hermoso sus creaciones de cuchillos y hojas en general, hay otras actividades conexas que también merecen un reconocimiento y admiración como es el cuero, la piedra, la fundición, la fotografía la creación, diseño y construcción de maquinas y herramientas y lo impecable y útil de su sitio web...son muchas mas lógicamente.

Ya le he agradecido antes pero no me parece redundante repetir mi reconocimiento a lo que con mucho sacrificio y dedicación ha logrado en todas éstas décadas.

Reciba mis saludos extensivos desde luego a su familia..

Lic. Juan Herbut G.


Translated:

First of all I apologize for the language in which I write but I would like, if possible, that the idea I express should contain as much as possible of what I feel and think.

I have read attentively a clarification that makes on your page about your experiences, studies and no less valuable concepts of what your career has shown in what you do and your retractors. It is not my custom to messianize people but I consider an act of infinite justice the recognition not only of excellence but also of humility and desire to contribute to the teaching that you offer and promote.

Throughout history it has been shown that it is always easier to disqualify and destroy (whenever possible) than to learn through effort and perseverance and that, far from achieving it with you, produces the opposite effect and exposes the false and the mediocre. Honestly, I do not think about the badness of these people but about the incapacity and the consequent mediocrity.

For more than ten years I have followed your work and your progress with attention; I think I have mentioned sometime as I admire the family union that you have and the remarkable atmosphere that is breathed in your study-workshop. Although your creations of knives and blades in general are a technological and beautiful spectacle, there are other related activities that also deserve recognition and admiration such as leather, stone, casting, photography, creation, design and construction of machines and tools and the impeccability and usefulness of your website ... and many more logically.

I have thanked you before but I do not find it redundant to repeat my recognition of what you have achieved with great sacrifice and dedication in all these decades.

Receive my extensive greetings of course to your family ...

Lic. Juan Herbut G.


Hi Jay,
Quetzal arrived this afternoon.  This a beautiful and really awesome knife!  I have never seen a handle like this.  With the Picasso Jasper accented with the Red River Jasper, it is all so seamless with both Jaspers and the bolsters.  I don’t know how you make it all come together so perfectly.  The handle fits my hand perfectly and has a really solid feel to it. I also like the file work all the way around.  I think it helps take the knife out of the ordinary and helps make it something very special!   The feel of the  knife is solid and the overall appearance is where it all comes together and makes a truly great knife that is going to make everyone to wish they owned it.
Outstanding job and an outstanding knife. Thank you for this great knife Jay!

--J.


Hi Jay,
Just wanted to let you know that I picked up the knife yesterday and it is amazing. The handle feels great and looks great! This will be a treasure in our home for the rest of our lives. Thank you for all of your hard work and craftsmanship and I pray that God continues to bless you and your family!

--T.


Hi Jay,
I'm writing merely to thank you for the vast amount of information you've put up on your website.
I am an engineer professionally, and make knives in my free time. I learned everything I know about knifemaking from the internet, and a significant portion of that knowledge came from studiously reading your site (many times over.) The technical knowledge you've published was extremely helpful, and your work itself is a huge inspiration.
I also took a page from your book and decided to "give back" - I wrote an extensive report on a telescope I built, in the hope that it would help others in the same way that your website helped me.

Thank you again!
--R. S.


Hello Jay!
To start, I am blown away by your craftsmanship holding the knife in my hands! Thank you so much! It is a formidable tool and work of art.  When I held the knife the first time, the line from Crocodile Dundee, "That's not a knife. Now THIS is a knife!"  It makes every other knife I have owned seem like a sharpened piece of stock metal in comparison.  The attention to every detail, the fit of the bolsters and handle scales, the grind of the blade, all the file work; every aspect of the blade and kit shows the thought and craftsmanship that you have poured into this! It has a presence, the weight and thickness of the blade assure me it is something I can really rely on.
I'm sorry it has taken me a while to write this. It has been busy and I wanted to really look everything over and admire the knife and kit before writing you.  I already cut myself with it haha. I was not being real smart when I was testing how sharp it was and ended up underestimating how sharp it was and gave myself a minor cut puncturing a milk carton.  It is more than I even hoped for and am honored to own such a fine blade.
  Thank you so much Jay! This has made me even more excited for the other two knives that you are still working on.

—T.


They arrived today. I expect perfection and you delivered as always.
The kits were a surprise to me. I know this sounds stupid to you, but, I am so use to a masterpiece and a sheath to be put on display. The embellishments, on the weapons, cause one to look at them as art pieces and not weapons of war. The kits bring home the seriousness of your works and the need for full kits. In the future I will get full kits.
I would guess the majority of patrons do not truly understand what you do. The trolls and detractors miss the mark completely. Your creations mean the difference between life and death.

Yours Truly:
P.


"Xanthid" Tactical Dive Knife, obverse side view in T3 cryogenically treated 440C high chromium martensitic stainless steel blade, hybrid tension locking-wedge-tab sheath in kydex, anodized aluminum, anodized titanium, stainless steel, Dive Calf Accessory Mount, Dive Belt Accessory Mount in neoprene, polypropylene, nylon, polyester, acetyl, duffle in cordura nylon, polyester, polypropylene, nylon, steel
Xanthid Tactical Dive Knife Kit

Hello Jay,
I bought a Krag from you several weeks ago. It is wonderful. Built like a tank, a perfect example of KISS. It maybe isn't quite as lovely to look at as some of your other work, but I would expect gravity to fail before the Krag failed.

But this letter is not about the Krag. It's about the Hybrid Kydex sheath that came with it.

I don't know if my experience with what is normally considered 'a sheath', is out of the ordinary, but until I got your hybrid sheath I never, ever had any sheath that was sturdy enough, or dependable enough, out of the box, to serve in anything but casual wear.

I have modified or replaced or discarded almost all of the other sheaths I have used. The ones that made it to non-casual use usually had some duct tape or electricians' tape doing one-shot duty, or maybe a cotter pin added, or somesuch. 'Kludge' is a good description.

I am in awe of the design and the execution of your hybrid kydex holster. You have won the holster/sheath contest, hands down, and nobody else made it thru the qualification trials.  They can all go home and cry in their beer, because I don't think anyone is ever going to top what you have done.

Holster orientations of up, down, left, right, horizontal or vertical, use with different thicknesses of belt or strap, can all be selected just as one wants, and every single one of them is rock-solid dependable, not a hint of flaky or gimmick. Easy as can be to change in the field, is sorta a cherry tossed on top of a perfect piece of gear. Oh, and don't forget that the service lifetime of this holster looks to be long enough to outlive the user.

Perfect. It's just bloody Perfect.

Thank you again.

Regards,
R.


Hi Jay,
Conodont arrived on Friday and it exceeds all expectations. It feels extremely comfortable in my hand, and has a satisfying weight. The mirror polish was beyond what the pictures show, and I've spent a lot of time watching reflections play across the blade and bolsters. The Moss Agate was the perfect choice for the handle and I love how the transparent areas throughout the stone add visual depth. The sheath is a work of art in itself and I love how the light sparkles off the bumps in the rayskin  inlays as it moves. When I wear it, it feels completely perfect and natural, like it was always meant to be on my belt. The weight is so well balanced across my belt that I can barely feel its there and could almost forget that I'm wearing it. Incredible work!

Thanks,
J.


The package arrived…
OMG, I love the shape, feel, and weight of the blade in my hand.
The pointy end and cutting edges are stunning. I almost put on gloves before I handled it.
The high quality sheath feels amazing on my side. Your remarkable craftsmanship shows through in every aspect, thank you!
I am most grateful for what you do.

-and later:

I love the knife, it sticks in my hand. I haven’t checked out the bag yet, I'm still drooling on the knife, I love how you grind them.

--T. S.


Dear Jay,
I instantly fell for this beautifully wondrous, esthetically appealing, and superbly functional "Mercury Magnum!" Seeing, feeling, and holding the Mercury Magnum, I knew that I had added another magical knife to my collection of Fisher knives! Upon receiving each of your custom knives, I am more and more enthralled with your creative genius that shapes each knife from concept to final finish.
I have reread your "Who is Jay Fisher?" section again, and your life choices and all your successes (to include your extended family) are the constitution of a successful man. I am so glad that Tom H. introduced me to you via the internet!

--D.

My response:

Hi, D.
Thanks so much for your kind words and your patronage. It is patrons and friends like you that allow me to make my finest pieces. D., I have many requests for the simpler knives I make (the bead blasted models with Micarta handles), and I know that those will be used and cherished by their owners. But the artist in me knows that there is so much more to be done. The knives you have (like the Mercury Magnum) are truly unique, and this is the very first (and only) time they will have existed on this planet… this is exciting to me, as I’m sure it is to you too.
From my research, I also know that gemstone handled knives are a forward trend, and the multiplicity of styles and arrangements based on a single artist’s or craftsman’s theme and execution are very much at the forefront of this field. When I look back at my past, my history in this art and this vocation that has allowed me to thrive; I’m thrilled to know that with time, these works will only get better with age. I’m excited about that!
Thanks again for allowing me this opportunity!

--Jay


Jay,
I am the one who is in debt to you for letting me purchase the art works that you create.
I am so happy to be able to purchase classic art work knives without worrying about the quality and design. Most importantly, I am dealing with someone who is old school whose word is his bond. In the world I deal with every day, someone is always trying to scheme and scam you out of something. It is like a breath of fresh air dealing with you.

--P.


I did (recieve it), thanks! Loved it. Feels great and the long blade does exactly as I wished it did. I found it sturdier than I thought it would be for such a thin blade.
Thanks!!

--M.



Subject: Thank you for your written material

Hello Jay,
I am impressed by your material published and your will to leave behind not only your good knives, but also your knowledge and long experience into a very narrow field.

As you do not expect, I am a Senior Design Engineer. We are manufacturing and designing quality triggers, mainly for hunting guns. Currently I am learning a lot from your written knowledge experience of using 440C stainless steel.

In some of our applications, we are using this material from solid or sintered. There are some properties discrepancies from batch to batch. We are interested in toughness, superficial hardness in a limited area and corrosion resistance. There are variations from part to part instead to have constant properties. After I will collect all data regarding our manufacturing process, in case I will not be able to find a conclusion and a way of improvement, then I will ask for your opinion.

Anyway, your material about Heat Treating and Cryogenic Processing of Knife Blade Steels: Crystal Unit Cells and Internal Interstice Geometry is very valuable for my work task.

Thank you and Best Regards,

Florin Hristu,
P. Eng.

My Response:

Hello, Florin.

Thank you for your very kind email. I’m honored that you appreciate my work.

Florin, I have seen this before, and after working with 440C for over 40 years, have been able to achieve process and methods to eliminate any irregularities. Because of the outstanding properties of this steel, it is, by far, my most requested blade steel for high corrosion-resistance, wear resistance, and toughness.

I’ll be very interested in what you discover, and if you wish, available for professional consultation.

Thank you again,
Jay


The culmination of all the skill sets that that must take , all the mistakes, all the education, self teaching., Sacrifice, time measured in years, frustration, ..... this is not normal knifemaking... this is next level crazy. you are one driven human being... still reading on your website and getting my mind blown. Lol.

--dhalpin22 (through Instagram)


Dear Mr. Fisher,
I hope my e-mail finds you in good health. I have recently read on your webpage that you are recovering from a surgical operation; I wish you a fast and successful recovery.

I am writing to you to thank you for your work, and for the works of art that you are creating, and for all the great knowledge on your webpage and all the inspiration you have given me. There are many beautiful, decorous knives with great fit and finish, but many of them are impractical and only decorous. Your works are beautiful, "clean" (not overfilled with details) and intended to be used. In my opinion they are just the best.

I am a young knifemaker and your works give me inspiration to make possibly the best knives. I will need many many years to achieve the quality anywhere near to that which you are making, but I will try my best. The problem with making better quality knives is that I don’t have anyone to talk to about them, to learn from or to find solutions of some the problems. Most of the other knifemakers in my country stopped their development at bushcrafts and somehow excluded me from their "community." The few that are making anything better just don’t want to share any knowledge.  I wish I could visit you one day to talk about knives and learn something from you (I really have many questions), but I know that it is rather impossible. Neither have you have the time nor I money to travel to USA. I will be glad if you find time to at least read my e-mail.

Today, after several hours of hand-finishing very hard hypereutectoid stainless steel and trying to achieve mirror finish, it came to my mind that you would understand the pain of this laborious process and that and I should write to you and thank you. Without you I probably wouldn’t be putting so much work into every knife and wouldn’t be making them as well as I am right now (compared to what I did several years ago).  

You don’t know me, but you are my mentor and teacher and the most important thing that I learned from you is to constantly develop and strive for the best. I wish I could learn directly from you, but I am glad that I can at least read your words, watch your videos and see photos of your works.

Thank you Mr. Fisher! I wish you and your family all the best!

With best regards, B. G.


Jay,

I’ve learned so much from you. The list of masterpieces that you’ve created really should include your website. No bull, just straight facts about a knives. Following your philosophy is in no way easy, but I know I’m at least attempting to do things the right way. Thank you for that!

My knives are still not good enough to show you yet haha... they may never get to that point. But... I’m having major fun trying to get to that point. Thanks for everything!!!

--Kevin


"Arctica" tactical, combat, rescue, survival knife with all accessories: leather sheath, locking kydex sheath, Ultimate Belt Loop Extender, Magnesium/Firesteel Firestarter, HULA with MagTac Flashlight LIMA with LED Maglite Solitaire, sternum harness plus, belt loops, clips, stainless steel hardware, SCUBA and Paracord lanyards, archival nameplate, heavy canvas embroidered bag
More about this "Arctica"

Hello Jay,

I sat down to open the package containing Arctica with a bit of trepidation, expecting a complex system that would require some work to appreciate. After first admiring your impeccable and beautiful work on the obviously made-for-business-use leather sheath, I laid out the rest of the box's contents. As I did, the first thought I had regarding the Arctica knife and tactical sheath was, "This is the real deal."

What a great looking handle, with the brass fibers providing a visual texture that made me want to pick up the knife. Taking the knife, in the sheath, in hand and appreciating the solidity of it as a unit is a striking tactile indicator of how tight the design and implementation is. This is a precision piece of engineering. I'm relieved that the handle isn't too large for my hand. Now to the really fun part, hitting that locking-mechanism release with the tip of my thumb and drawing the blade from the sheath. And then doing it again and again, just to enjoy it; it locks securely with no play of knife in sheath, but releases so easily with the natural draw grip. I wondered if you had an "Aha!" moment when you thought of the design.

This is a robust knife, with the feel that only the best tools have. To me that feeling is, "I trust this tool to get the job done. I can rely on it to perform whenever I need it, under hard use and bad conditions."

Setting the knife aside for a bit I go back to the sheath and its functionality. I find the HULA ingenious and it makes so much sense to have this attached to the sheath rather than a separate attachment point elsewhere. Moreover, the ball joint lets me put light wherever I want it, with the paddle-tensioner easily adjusted with a gloved hand. At this point I am certain this is going on the sternum harness.

Jay the integration of the fire starter and diamond sharpener are well done and together with the spare parts and accessories, to say nothing of the sternum harness, complete this "ultimate package." All of your detailed instructions are a valuable resource, but my initial trepidation about the system was unwarranted. What you've built is precise, robust and intuitive. You did the thinking so I can do the 'doing.' I think my words of appreciation for Aquila were more concise, but I've had such a good time this afternoon getting to know this Arctica that I wanted to share my delight.

Again, much respect for your knowledge, skill, precision and attitude. To be the pinnacle of human endeavor in a chosen field is indeed righteous.

Thank You,

--M.


The Duhovni Ratnik has to be the best you have created in that style.
What amazes me is how you can come up so many different themes. Most knife makers stick to one or two styles and call themselves artists, they would do themselves a service if they looked at your web site and actually tried to learn something from it. I am sure their egos are to big.

--P. K.


Hello Mr. Fisher,
As the title of this email already says, each time I am visiting your website (daily :) ) I become even more and more impressed.
You are for sure the best knifemaker alive and not only for your gorgeous work but also for your vast knowledge.
Any visitor, no matter of his profession will definitely find in your website a reason to go further, to learn more and to improve reaching for perfection. I never tried to find a fault in your work as I am sure it would be a waste of time, the way you are judging things, the sack of knowledge behind each and every thing you make is enough to know that you are facing a very fine educated man and craftsman.

I simply adore your courage to face and combat the lies promoted by the huge "sharks" on the market, never seen this before and maybe I will never see it again; it requires arguments, self trust and motivation for the good of the customers. Once again thank you very much for all your efforts to share your vast knowledge with us! May God bless you for long and peaceful years in the Sharp Instinct Studio! :) All the best,

--A.


Here are a few generalized comments that are frequently asked:

Jay, what is the best knife steel?

Oh, I get this one a lot. Someone wants a blade that will hold an edge forever, can shave hair off a mouse's tail, yet when it needs sharpening, a few light licks on the latest gimmick rod will transform it into a three pound razor. Sorry. Can't be. Knife steels are the most advanced they've ever been. High technology alloy tool steels are made the best they can be, metallurgy has reached it's pinnacle for our time. But there is NO MAGIC STEEL. All steel uses, no matter the tool or application, must be carefully weighed for optimum performance. Fillet knives must be thin and springy, therefore cannot be extra hard, axes must be shock resistant and tough, therefore cannot be thin and brittle. A little common sense is required here. Use the best steel available for the application. And the application varies. So this is an unanswerable question. Try again.

What's the longest wearing steel?

What are you cutting?

Does it matter?

Yes, of course. Many materials are abrasive. Elk hair loaded with dirt (silicates and tiny rocks) is horribly abrasive. Some materials are acetic (fruits, blood, fats and fascia) and will etch the cutting edge away. Some plastics are amazingly abrasive.

But I've seen tests where knives cut rope over and over. What's the deal?

Looks neat, huh? This merely tests the edge's ability to cut rope on a board. So if that's what you want, harden a piece of high cobalt, high tungsten carbide to 85 Rockwell on the C scale. If you can possibly get an edge on it, it will just about never wear out. But don't drop it! It will shatter like glass.  I'm being a bit facetious here, but look, a knife blade is usually used for a variety of operations. Cutting, scraping, slicing, picking, and light prying.

What? You said never to pry with a knife!

You're in the advanced area of the web site, so let's get real here. Who hasn't lightly used the edge of a knife to dig, pull a tack out, lift a tough label. I said light.

So I just want to know what the best steel is! Is that so hard to answer?

Sure it is. Do you want hardness with a thick edge? Will it see heavy use? Do you need it thin for a sharper edge angle? Do you need high corrosion and stain resistance? Will you need to field sharpen it? Will it be used to flint-strike a fire? Will it be dropped? Do you need an aggressive tooth profile? Will it need an accurate spiked point for insertion? Do you need it easy to clean? Low reflectivity? Smooth profile? Shock profiled? Chop profiled? Will you clean it? Do you need to camo paint it? Will it reside in a block on your kitchen counter or is it destined to travel as an executive chef? Will it sit as a display on your office desk, or will you use it to cut roofing materials on the job? Is it a scalpel, a hammer, or a straight razor? Have you really considered just what, when, and how you'll use it? How much do you want to spend? Do you want a piece you can hand down to your grandchildren? Will it need to appreciate in value? Do you want to use it, then retire it on your mantle? Will it only gather dust on the inside of your credenza? Will you use it to castrate bulls, lop off rattlesnakes heads, dig in a Mesoamerican ruin? Will you dress ocean game fish on your yacht with the knife? Will you cut tangled hawsers, clear the skin off a helo, rescue a Navy Seal from a wrecked APC? Will you keep the natives at bay when they tell you you can't point your weapon unless you are ready to shoot? Will you use it in counterterrorism operations in the dead of night in hostile lands and need it to breach as well as defend and dispatch your enemies in the most serious application of any knife? All of these scenarios are from knives I've made; that's why I ask.

Now if you're thoroughly confused, perhaps you'd better start with the FAQ page here. If you're thinking about all those conversational details I illustrated already, gather in some answered emails about knives on this very page, and please enjoy your stay!

Top of Page

Jay-
Wanted to let you know how much I am loving the Sirara! The knife feels solid in the hand, no worries about slippage and the balance is beautiful. The curvature of the blade really promotes a clean slicing cut, and I have been enjoying the vampire rip teeth! No trouble returning it to the sheath. I have perfected that! Also the locking sheath is brilliant, and I can't imagine a blade without one.
I had ordered a knife last year and knew that you had many other blades in your line up, so as usual when looking at your website for what's new I also look to see if I might purchase a finished blade while I'm waiting for mine to be completed, and I found the Sirara. So happy with the purchase. The quality, materials, attention to detail, and your love for your 'craft' is very apparent.
I look forward to the knife you are currently working on, and have already begun thinking of what I want next!!
You are a true artist, craftsman, and creator of the sublime. Many thanks!
Best,

--J.


Dear Jay,
The piece of art has arrived and is just divine. Thank you so much for being patient with me and my constant bugging. I am on cloud 9, what an incredible knife. I am very honored to be able to call an Ari B'Lilah mine. I will treat it with care and as it deserves to be treated. Again: many many thanks Jay.

Warm regards,
R.


Jay,
That is so unbelievably beautiful, I am at a loss for words.  The downside of museum quality is that it belongs in a museum for everyone to see and I will no doubt feel a little guilty using this to chop produce.  But I will not deny this work of art its purpose, so I shall definitely put it to work.

—Later—

Jay,
Looks like a dream, cuts like one too. Has transformed the tedium of a marathon of holiday cooking to a joy!

--A.


"Concordia" chef's knife  in 440C high chromium stainless steel, T3 cryogenically treated blade, 304 stainless steel bolsters, Sodalite gemstone handle, stand of American Black Walnut, Poplar, Sodalite, Black Galaxy Granite
"Concordia" Chef's Knife

Jay,
I received "Sadr" yesterday. Thank you for your promptness.
As you know, this is a beautiful knife in all ways, but your custom filework and engraving impress me the most. The attention to detail is incredible. It makes me wonder how much time it takes to create such a knife.
Please keep up the great works.

--J.


Jay,
I just wanted to share a note. I am in awe of your work. I've spent many hours combing your website. As a craftsman and hobbyist myself, I am in complete awe to what you do. The sheer perfection and flawlessness of your work would be impressive so much on its own, but the prolific extent to all you do nearly overwhelms me.
I've made my own knife designs, featuring my own lapidary work.  Nothing on the spectrum of what you do,....but I treasure what I've made.
I'd like to get a fixed blade, with a gemstone handle from you someday. In the mean time, I wanted to thank you for your art and inspiration. I enjoy just spending evenings looking at your work, admiring the file work, seeing your artwork in so many mediums (metals, lapidary, leather, etc.)
You should write a book, or consider a coffee table book with your wonderful photography. I've never come across anyone like you or the work you do. I will be so sad if ever your website goes away. I hope there is a way your legacy will go on. Your work is singular.
Thanks for your art and inspiration.

Best,
M. M.

Jay…
I can’t wipe the stupid grin off my face. You have gone far and above the call on this one, and have exceeded my expectations in every way! (which were already very high) I really like how the stand came out as well, and like the added touch of the jasper on the mounting pegs and the carved claw feet.
P.S. – I know you weren’t sure of the jasper as a handle material – but I thank you for making it work for me. ever since I saw it on another of your knives, I knew it was something I wanted to have on this one.
Thank you for making this knife for me.

-A.


"Phlegra" custom combat, tactical knife, obverse side view in blued O1 high carbon tungsten-vanadium tool steel blade, 304 stainless steel bolsters, canvas Micarta phenolic handle, kydex, aluminum, blued steel sheath with engraved flashplate
More about this Phlegra and Mercator

Hi, Jay.
I got the knives today. They are Gorgeous. Hopefully, I'll never need to use them for combat, but at least I know that if I do need to use them, I'll be using the best.
Thanks again,

C. C.


Jay
That's one sweet knife!!!
Great presentation. The display tag is the kind of thing I would do.
Well done!
I'm sure you've heard it all before ... but I love it.

Thanks,
B.


Hi Jay, not a ‘purchase enquiry’ just a few words to say I have never seen such beautiful hand made Craftsmanship knives!
Found your Web Site on a knife search (I am in the UK) and when i saw the photos, I was to say the least, very impressed. Well done Jay, you are a true knife Craftsman.
  Regards

Jim Rea FLS.
(Parks and Countryside Officer and Axe Collector)


Does it follow that I reject all authority? Perish the thought. In the matter of boots, I defer to the authority of the boot-maker.

--Mikhail Bakunin


The feel, balance, and natural ergonomic design of the Sargon handle is exceptional – more than any other knife I have ever previously held, it really feels like a natural extension of the hand, and is quite secure and comfortable to hold, as I’m sure it will be to use. The engraving on the bolsters is aesthetically appealing and perfect (at least to my eyes), but not so ornate as to detract from the other elements of the knife. And the fossilized stromatolite algae handle scales are as beautiful to behold, as they are to contemplate – timeless, in fact. To imagine the huge span of time witnessed by this exceptional material, and realize that our entire lifetimes, or indeed, the existence of mankind, occupy but a vanishingly small fraction of the time taken for it to form, and its subsequent persistence on earth, is a truly humbling realization.

As I have with the other works I acquired from you, I very much appreciate the exacting and detailed filework on the spine of this knife, as well as the edgework. Finally, the mirror polish of the blade, its mellifluous lines, and its exquisite sharpness combine to make it a treasure to behold, but also one of the finest, yet most fundamental of tools. (The unique combination of utility, and art, are, first and foremost, the qualities that piqued my interest in fine, handmade knives at the outset, as I am sure is the case for many knife aficionados).

As I had already mentioned in my earlier missive, I was extremely impressed by the thought and execution of the sheath you created for the Sargon. In my humble opinion, it represents one of the finest and most complex sheaths you’ve ever created (at least of those I am familiar with). Its construction and contrasts result in a sort of trompe l'oeil effect, so that it appears to me, not as a simple, flat surface, but a truly three-dimensional structure which, viewed under the correct conditions, “jumps out at the viewer.” The bold colors of the leather nicely complement the scale gemstone as well. (BTW, one observes some extremely interesting optical effects when illuminating the scales with a green (532 nm) or red (693 nm) laser at an acute angle – certain mineral elements apparently behave as optical conduits when thus illuminated. I will attempt to photograph the effect and forward the results to you later.)

Jay, I must apologize for the fact that my crude descriptions, coupled with my rather nascent knowledge and understanding of knife-making art and technology can neither adequately nor eloquently describe my appreciation of your creations. I am certain, that, with time, education, and observation, I will eventually become better enabled to do so on many more levels than I can currently. Fortunately, your extraordinarily detailed website provides all of the means required for such an education. (Moreover, I must have a better look at the knife under natural sunlight, instead of the grim artificial light I currently have available.)

--G. L.

"Sargon" obverse side view in CPM154CM high molybdenum stainless steel blade, hand-engraved 304 stainless steel bolsters, Fossilized Stromatolite Algae gemstone handle, Frog skin inlaid in hand-carved leather sheath
More about this Sargon

Jay,
I just got home from out of town and finally got to see the knife. I have read the reviews that the other customers have written. No one can truly understand the craftsmanship and beautiful artwork that you do until they hold one of your works of art in their own hands. This is truly one of a kind. I'm sure this piece will be handed down from generation to generation.
Thank you Jay for such an amazing knife.

--S.


Dear Mr. Jay Fisher, I received your knife the Yarden about a month ago. Since then the knife has been an inseparable part of my daily life. I use it to do everything around the ranch from opening bales of hay to skinning hides. The feeling of having this MAGNIFICENT tool on my side is second to none.
I have to say that the knife is the BEST art work I have ever seen or felt. From the shape and strength of the blade to the unbelievable comfort and art of the handle. It is like the knife is an extension of my hand and simply feels so natural to handle!! I have been around knives all my life but I finally understood the difference between a knife and a Jay Fisher knife!! Without a doubt the unique balance, feel and art work is one of a kind!!!
I can not thank you enough for your effort in making this knife and I will forever cherish this marvelous tool.
Thank You.

Your friend,
N.


Thanks for the website. I don't make knives, but you have a lot of good info. Nice work, I wish I could afford one.
Andy

This kind of email is important to me, as it should be to any knife maker or any artist. Though Andy can't afford a knife now, his life will grow, change, and evolve as all of ours do, and one day he may remember the knife maker who's work he admires, and can now afford. I look forward to serving his needs at that future time.

Top of Page

Jay,
Just walked in a few minutes ago ... knife was waiting for me when I arrived, and I must say at first glance it looked huge; however, once I took it out of the sheath it had that incredible feel that I have come to love with your knives. My PJLT Tac knife has been with me now on three different continents and it is now like and old friend. For my up coming deployment to OEF I wanted something with a little more bulk as well as something that I could carry in a survival/exfil mode...I must say this definitely looks and feels as if it has the perfect combination of length, weight, and balance to take on the most demanding tasks. I like the way you incorporated the webbing into this knife and it has the same secure locking mechanism that I have come to trust. After six months in OEF and another 60 days in Africa, I never once had the locking mechanism open while in motion. I carried it both upright and handle down on my vest and never once had a problem. I can't thank you enough Jay for your quick response and as in the past, having one of your blades close at hand is a very comforting feeling.

... I sing the praises of your knifes at every opportunity and I only wish that every soldier, airman, sailor, marine, and civilian serving this great country of ours could have the opportunity to carry one of your knives where ever they might find themselves - most especially if that brings them into harm's way.
All the best Jay to you and yours and as always thank you very much.

--T. A.


Dear Mr. Fisher,
My first degree is in Physics from University of Athens (4 years), and I got a second one in Mechanical Engineering (5 years) from the Polytechnic Institute of Athens. Now, these degrees were a long time ago, and I was never an expert in Materials Science, but I know my metals, and I sell industrial shredders that have cutting tools. What you write about knife materials and steel is 100% correct, and I wonder how so many people fall victim to the crap and the hype tooted by a lot of manufacturers and even custom knifemakers. Maybe it’s the internet. After all, as the recently passed Italian philosopher and writer Umberto Eco once wrote, “Social media gives legions of idiots the right to speak when they once only spoke at a bar after a glass of wine, without harming the community. Then they were quickly silenced, but now they have the same right to speak as a Nobel Prize winner. It’s the invasion of the idiots.”

George Papadakis
Athens, Greece


What do people want? Collectors want something different, not the same old four inch drop point with a stag handle. They see the same liner lock heat-colored damascus folders with mastodon ivory handle scales. Yeah, I can make those, but why make everything everybody else does?

Today I received another functional great knife and kydex sheath...Outstanding.

--B. M.

Hello Jay,
I have received the PJ-CT kit and I'm getting familiar with it.
As I told you before it's everything I always looked for in a knife and beyond, a true "universal" one. Size, balance, sharpness, handle shape: it fits me perfectly.

Life and Real World (versus Fantasy World) is full of uncertainty and danger. A bad move can end up really bad. That's why we need to think, learn, assess, plan, then act...
Whenever we have to rely not only on mind and body but on things and tools, there are some that simply can't fail, because just one failure could be too much. Be it a parachute, scuba diving tank or assault rifle, it must do what it's meant to, when and where you need to.
A knife for the Real World is just that, not something looking good or "tactical" but a performing one. The problem is, of the countless knives actually made, the real ones are few and far between. Again, we need to think, learn, assess, plan, then act...if you do, you clearly understand which ones you can rely on. Handling a Jay Fisher's knife is like experiencing true love. When you do, you can't accept compromise anymore, or settle for less.

--R.



...I enjoy your writing, colorfully injected with humor. I appreciate the work and knowledge base required to produce the works of fully functioning art you've pictured. I understand the research and diligence required on your behalf to have become top notch in so many fields (lapidary, leather tooling, computer knowledge/website design/script writing, and many more) makes you and your product one of a kind. The hours and dedication required to accomplish these feats is staggering.  You have accomplished and mastered multiple specialties.  Most will attain one, if that.  Further, I appreciate your ability to articulate your thoughts utilizing proper English, grammar, and punctuation. That ability, pride in end product, and respect for the reader is rare these days; more and more people are using text lingo/slang in business writing.  Thank you for taking this reader through the steps and equipment used and needed to offer such fine knives; a journey through your history as a craftsman, who clearly loves what he does to the point of learning other crafts in order to further his ability to offer the world a fine knife/work of art/investment opportunity/legacy item for generations to come.  You are an amazing man and one who has every right to be proud of his accomplishments.  I am truly amazed and inspired.

Thank you for your time if you have the opportunity to read my email, and in advance regarding an answer if you are kind enough to send a reply. Should my email not reach you, I am thankful still for having found such a valuable source of information in many fields.  I hope to one day be able to own a custom piece made by you.  Finally, a purchase my husband not only won't fight me on, but will happily help me with the decision making.

Best Regards,
Christina Coffman, GJG


Jay,

Hestia arrived today. I couldn't be more impressed with your workmanship. The fit and finish on this knife is superb. The balance is perfect. The hollow grind edge is razor sharp. The filework is exact, consistent and beautiful and the gemstone handle is amazing. I could not resist taking a closer look so I hit the knife with a strong broad spectrum light and examined it through a magnifying glass. The detail and pattern in the lace amethyst handle is a natural complex wonder. I will proudly display and use Hestia and try to determine which, if any, of my relatives is one day deserving to inherit this piece of knife art.

Sincerely, T. P.


"Duhovni Ratnik" in case view. Case interior is Cherry hardwood and Ebonized Poplar, varnished and sealed, with Engraved brass and lacquered aluminum nameplate.
More about this Duhovni Ratnik

FedEx just dropped off the package Jay. My God! You do take awesome photos Jay but pictures don't do this justice! The case, sheath...geez..
The knife is HUGE and feels great in my hand. The gemstone handle and the knife as a whole surpassed all expectations Jay!! Seeing the coat of arms inlaid into the black jade is stunning. The engraving and file work blows my mind. BTW, the jade handle almost feels like glass instead of stone.
I can't say thank you enough for taking this project and realizing my vision Jay. I can't tell you how much I appreciate it. This will be a cherished piece that hopefully gets passed down the generations.

--D.


Hi Jay!
I have received Daqar and I have been slow to respond but that has given me more time to show off my newest knife.
This knife is much more than just a fine blade, it is a work of art. I still find it surprising at how many people first describe this knife as beautiful.  Even for non-knife  people, that is the first word they use to describe this knife.
The sleek overall look is the first Wow that you see and think. The jade handle is even better than I had first imagined when I requested it. All the fittings and seams are so tight it is like they are all one piece, amazing workmanship. The engraving is, again, beautiful and elevates the whole look of the knife to the next level. Jay, you have outdone yourself in making this knife and I am very happy to have this in my collection.
Thank you for another great knife,

--J. N.


In my wildest dreams I never would have thought of the design of the art knife or the display unit. I have always maintained No Input from me is the only way to purchase one of your art pieces. I feel sorry for the clients who insist on their own input... because they are missing out on a unique art work that could have been created by you!
Best always!

--P.


Jay, I would want a knife that would require the least amount of maintenance and i like the special sheath or holder where a person can release the knife with ease. and the blade. will it keep an edge? i have purchased many "good looking" knives that will not hold a blade and this is frustrating to me. i want a knife that will hold a blade if such a knife does exist. please school me on your knives as far as not rusting and holding a blade....thank you for your earlier reply. D. K.

This type of inquiry happens a lot. The guy means cutting edge, but it's my job to read between the lines to give him an answer he can hang his hat on:

D., 440C would be a good candidate for very little maintenance. It contains 17% Chromium and 1.25% carbon making it one of the most corrosion resistant tool and die steels made. It is suitable for dive knives in salt water. The only thing that "attacks" the steel is concentrated acid.
ATS-34 is the next best thing. Three percentage points of chromium have been replaced by molybdenum, making ATS-34 a high chrome-moly tool steel. This allows for increased toughness, and is used where a thin cross-sectional area is used. It is more expensive than 440C.
Factory knives are usually made from 440A, 440B or 420 series stainless steels. The reason factories use these inferior steels is that they can be die-pressed (stamped) from sheet stock. The steels I use are usually what the dies are made from. The edge holding capability of properly heat-treated modern knife steels is astounding. A factory knife will typically need sharpened three times to field dress an elk, a good custom knife will dress three elk without ever touching the edge.
Sometimes, I get requests for "super-steel," a material that will hold an edge forever, cut through rocks, and will support a 280 lb. man when shoved into a tree. There is no such thing; that's Hollywood. But it is true that we have the technology to make the finest steels in existence today.
Sheaths: Leather is good, serviceable and attractive. Leather sheaths should last a generation with care, but are not waterproof. Kydex and aluminum frame with a tension fit is the next best type, and should last three generations. My best sheath is Kydex, aluminum, with a stainless steel locking mechanism, consisting of 38 components, suitable for ocean salt water. This military grade sheath will add $350 to the base price of a knife.
Thanks for writing,
Jay

Top of Page


...I totally love it, every aspect is awesome, love the engraving.
Thank you very much.

Cheers
R. K.


Jay,
I can’t thank you enough for the abundance of knowledge that you have made available for folks to read. I’m old enough and wise enough to recognize wisdom in others.

Thanks again,
M. B.


Hello Mr. Fisher.
I just wanted to say how wonderful and valuable your site has been to me. Your works of art are true inspirations-not just as knives but as sculptures, beauty and functionality combined into one elegant piece, not just once but countless times over. It is as if your canvas on which you work is as plentiful as your imagination-which seems to be endless; blending every aspect of a project together and creating a uniform and whole piece of art. Your site has been the most educational site I have come across. In my opinion, without the detailed instruction of every process allows you to work on the philosophy behind the work-the dedication, reasoning, science and the means to creating something beautiful and timeless. And what is a learning experience if someone hands you all the information and solves your problems for you? So far as "instruction" goes, your site can not be beat... I am sixteen years old and have my own, and even successful business- thanks to you. I have learned a great deal, such as proper grinds, heat treating, sole authorship, the use of materials and even working with customers, just from the methodology behind every skillfully crafted knife and valuable insight on the many pages of your website. Your work has kept me going on pieces which I did not think I could finish, when I'm in the dumps because something has gone wrong-a quick browse on your site gives me the fervor and dedication to keep going. Not that I am even close to your skills or knowledge, but I hope someday I might be half as good. One day, If I am lucky enough I will own a Jay Fisher knife- and treasure it forever. I thought that if I never wrote this I would feel guilty... just thank you.
Please keep up the amazing and inspiring work.

-Josh Miller


"Manaya" hatchet sculpture in hand-engraved ATS-34 high molybdenum stainless steel blade, 304 stainless steel bolsters, Nephrite Jade, Green Goldstone gemstone handle, stand of Walnut, Oak, Tulipwood, Jade, Migmatite Granite
More about Manaya

Jay,
I was tracking the package eagerly and was happy to find it arrived a day early. The knife is simply beautiful. Without being prone to hyperbole- it is the best knife I have ever held by far. I am so, so impressed. The balance is absolutely perfect. This is a beast of a knife, but it fits my hand like it was made for it- feels like an extension of my arm. The geometry of the blade is so perfectly symmetrical and the the cutting edge is surgical.
I remember reading your website where it says that you "make the real thing." I believed that statement when I read it, but now I feel what you mean. This is no factory production knife. I know our men in combat who carry your knives have confidence that the knife will stand up to any challenge. The kydex sheath is awesome and it locks the blade without even a slight jiggle. The accessories are such a nice touch and I greatly appreciated that you put that much thought into the components that would compliment the knife/sheath.
Jay, this is the finest object I have ever purchased. Thank you for being the professional that you are.

Sincerely,
--C. B.


Jay,
My Dad received the knife and is very pleased. It exceeded his expectations and he's very happy to own a Jay Fisher folder.
Thanks much and take care,

M.


Hi, Jay!
My apologies, things have been crazy over the holidays here. Between waking up to my son, my girl, and the knife on Christmas Eve, I had more reasons than any man needs to keep a smile glued on my face for my birthday. That's pretty sweet timing for a 5 year commission :).
I'll write a better review when I'm back at a computer, but I friggin' love the knife. In fact, we're weighing out placing another commission, provided you don't mind having 3 of your beauties end up in the same collection!
I hope you and your family had a blessed holidays, as well.

Cheers, E.


Jay Fisher, I have a difficult time with keeping up with what you say the knife book will contain, but my question is simple. Will the book include information on why some people make such ignorant comments such as "Who would pay over a grand for a crappy knife?" (And this guy was referring to all handmade knives, I tried telling him the difference but he wouldn't listen.)
B. R.

My response:

Hi B. Thanks for writing.
Though I’m working on the book, I don’t have a publish date yet. Right now, in addition to over a hundred knives on order and a four year waiting list, I’m undergoing a complete website rebuild to comply with new W3C guidelines. I’ve completed over 160 pages, but still have a large block to go. After that’s done, I can spend many more hours on the book and get it nearer to publication.
B., I understand the kind of people that you’re talking about. There is, unfortunately, a lot of ignorance, misinformation, and hype about knives in general both in published media and on the internet. Most people simply do not understand what goes into making a fine knife, much less what the long term value of fine and handmade custom knives is. There are a lot of comments you can make to people like this, but I’m afraid that if they don’t want to educate themselves, you cannot do it for them.
The best thing to do is find like-minded people who know the business and are actively engaged in it to have a meaningful conversation about it. Simply, put: who would pay over a grand for a knife? People who know the value and are comfortable with the price, that’s who. Many people don’t know the value, and are not comfortable with the price. There are many less expensive options for them, too!
Thanks B.,
Jay

Top of Page

Jay
The knife is absolutely beautiful, exactly what I was looking for. The Tiger Eye gemstone handle looks great!. It feels very massive in hand but seems to balance nicely . I feel like I could chop thru bone with it. If it wasn't so large I would carry it all the time, lol . The sheath sets it off perfectly btw. Beautiful job on the filing and etching , the leather work , all the little details.
Thanks again!

--T.S.


Mr. Fisher,
The knife is better than I could have imagined! Thank you so much...the knife really looks awesome.

--K.


I had this this white box on my bench….Like the new drawstring bag that comes with the knife..
The knife is an amazing recreation of a vision upon which we collaborated to the “T.” I looked at every seam and joint with 3.5X loupe magnification..polish and fit are amazing (not a space or rough spot anywhere, stone color is dramatic and the dovetail fittings are for me technically unimaginable (except that I have it here real-time in my hands), the sheath is a real work of art…the stitching and leather selection are so well constructed and the edges are solid and even. This specimen and leather selection is a real work of art.
The balance and ergonomics are excellent. The appearance of the knife belies the intricate balance your skills have achieved. One would think from looking that it would be blade heavy, but it is not.
All in all I am totally pleased. Unfortunately words are insufficient to match your skills as a master craftsman.
Keep up the good work…

--B.


Hi Jay,
Glad to hear the deposit made it! Our postal system here is far from efficient! I'm not too worried about how long you take. As I've said, this design has been in my head for a very long time. I can wait another year or two or whatever it takes. Thanks for taking the project on. The more I look at your website, the more I like some of your other designs. I can see myself possibly ordering again soon! Your gemstone handles are by far some of the most beautiful I've seen. I've yet to see any makers in Texas (or contiguous states, for that matter) at the shows produce handles such as these.
Have a good night,
A. F.

My response:

Hi, A.
I started making gem handled knives back in the very early 1980s. Back then, I thought I'd discovered something new and novel, only to find out later that the ancient Persians and Chinese did some beautiful jade handles and even inlaid them with gold pique work. The difference today is one of expediency. With modern abrasives, we can do in days what it took years for the ancients to achieve. Still, no one else is making as many gem handled knives as I do and have. Though you'll hear many reasons, it's really very simple. To cut, carve, sand, and polish gemstone takes a tremendous amount of time and effort. You can't whip out a handle in an hour or two, and the equipment to work with stone (diamond abrasives and cutters) is expensive and takes some time and practice to learn. Like fine mirror finishing on a blade, a lot of makers aren't willing to take the time and effort. So you see things like plastic rock (called stabilized) and imitation stone that goes by a variety of names, but is mostly polyester and acrylic.
Nothing looks, feels, and lasts like real rock. Take a look at a couple recent creations:

I've got some great new gem materials that I haven't slabbed out yet, and can't wait to use them!
Jay

Top of Page

Jay,
Argiope is a remarkable weapon. When I first saw it on your web site I knew that I would like the radical orientation of the blade to the hand. But that did not prepare me for the feel of the knife. It fits perfectly into my grip. It feels like an extension of my arm. I am not an expert, but I have handled a fair number of knives and swords. I believe this is only the second time I’ve held one that is truly balanced, but it goes beyond that. The beauty of the weapon, the way it meets the hand, and the balance, are all part of something more. It’s almost as if it has a soul. That must be why it has a name. I own other weapons, and I have always sought quality. Argiope, however, owns me. I’m just it’s keeper for a time.

Thanks doesn’t cover it,
--P.F.
P.S. I’ll have another order for you shortly.


Mr. Fisher,
It is just before midnight here in NYC, just walked in the door, home from a long day at the restaurant. To my surprise was a FedEx box waiting for me in the hallway. I am normally a pretty collected individual, however I was like a kid on Christmas as I opened the box.
I am beyond impressed with the knife, it truly is a work of art and great craftsmanship rolled into one. From the sheath, to the balance of the blade, to the beautifully sculpted handle, I really could not ask for more. You have a great talent and I thank you for putting such time, effort and precision into this knife, it will be cherished for a lifetime.
Thank you again Mr. Fisher.

Sincerely,
L. C. G.


Jay,
I picked up my Vulpecula today and I love it! The knife and sheath are both beautiful - even your excellent photography does not do justice to the real thing. This knife will be in my family for decades to come.
Thank you for all your hard work and dedication!

--J.


"Dagon" fillet, boning, carving, chef's, collector's knife, obverse side view in 440C high chromium stainless steel blade, 304 stainless steel bolsters, Green Orbicular Jasper gemstone handle, frog skin inlaid in hand-carved leather sheath
More about this Dagon

Hi Jay,
Thanks for checking in; I received the Arctica today.
Wow! There is no way I can describe how impressed I am with this knife. The pictures on your website are great, but they just don't compare to experiencing the reality. It's going to take me days to get used to every detail, especially with so many great accessories included, so here are my very first impressions:
The balance is perfect; that big rear bolster really balances out the hefty blade so that it pivots perfectly on the first two fingers of my grip; combined with the thumb rise, this thing handles like a much lighter knife.
At first I thought the space between the bolsters was a little large for my hand, then I realized, a knife like this was designed for guys who wear gloves! Sure enough, with a pair of shooting gloves the grip is perfect.
The flat finish is ideal for a no-nonsense work knife, and the squared-off file work adds detail without being "showy" (which I don't think would suit it). I love how all the metal parts on the sheath and it's accessories match the finish on the knife.
There are so many other impressive details, but you're a busy guy, and anyway the point is I couldn't be happier, thank you so much for making this knife and giving me the opportunity to own it.
You have a customer for life; I'm already looking at some of your inventory knives!
Thanks again,

J.


Hi Jay.
I received the Carina yesterday, and thank you!  It is breathtakingly beautiful.  An amazing work of art, thank you.

Cheers,
K.


You are truly a blessing and treasure for then knife-making community. Thanks for posting my email to your website too. I'm honored to be part of your discussion to bring knowledge and clarity to knife enthusiasts around the world.

--A.


The art of writing is the art of discovering what you believe.

--David Hare

Dear Jay,
Hello sir. I am a big fan of you and your knives. I feel that you are a true professional craftsman. Not just in metal, but also in wood and leather. I’m afraid for the time being I do not have the kind of money for one of your knives. But someday, you will hear from me, and the knife you will make will be extraordinary! Sorry that this email isn’t to purchase, but you’ll be hearing from me again. Until then,

Sincerely,
D.


Wow, Jay, That's Awesome!
The knife is incredible, and I can't wait to use it... I can't wait to replace what I currently use.

--N. F.!


Dear Sir,
I simply want to convey my appreciation for the beautifully artistic work that you do, and the incredible information that you have so generously provided on your web site. I have learned so much by reading your articles and I find myself revisiting the site quite often.

You Sir have my most sincere respect and appreciation in that you have taken your craft to the level that you have achieved. Please don’t bother to respond as I know you are a very busy man. Just wanted to let you know that I am in awe of your skills and knowledge. I am an amateur hobbyist and wish I could do what you do. After re-reading this it sounds kind of mushy but I don’t know how else to say it.

--J. S.


Jay,
The knife and sheath look awesome!
I have read the provenance info on your website, and I particularly love the link between the knife and the sheath i.e. The Celtic Goddess "Macha" and the design of the sheath; the rooster tail agate colours, name etc., and the feathers on the sheath.
A knife for the ages, and a family treasure for future generations!
The knife is a beautiful thing.

Regards,
P. B.


Complete package. The Ari B'Lilah is exactly what I expected. Perfection.

--P. K.


"Macha Navigator" obverse side view in 440C high chromum T3 cryogenically processed stainless steel blade, 304 austenitic stainless steel bolsters, Roostertail Agate gemstone handle, hand-carved, hand-dyed leather sheath
More about this "Macha Navigator"

I must say as a knife aficionado, your site has been the most informative and detailed of any custom maker I have seen to date. I'm a soldier currently serving with the Second "Dagger" Brigade of the 1st Infantry Division and I'm contacting several artists in regards to a tactical fixed blade that I can carry with me here in Iraq. Your tactical blades section is more than impressive. I've sent correspondence to Jim Siska, Reese Weiland and David Broadwell all of whom I admire for their artistry but when I came upon your site it occurred to me that utility is just as, if not more important than the aesthetic. I am taken with the lines you use in particular for the "Treatymaker", "Phobos", and "Kadi" blades and the "Triton" kerambit looks nothing short of deadly efficiency bound to a hand held work of art.

Ok, so here's what I'd like to know. How much would it cost for a Kadi or Treatymaker style blade of S30v or D2 with the unit insignia of "The Big Red One" worked into the design of the blade, either with engraving or embossed or a change to the shape of the base of the blade if that would even work? Lignum-Vitae handle material and the fittings of your choice (with unit insignia possibly worked into the fitting instead if that would work better). Let me know what you think and what you can do and approximate price range for a blade length between 7 and 9 inches.

My response:

Hello, Ben. Thanks for writing, and thanks for your kind words about my work and web site. More than anything, thanks for your service to our country.

For a general idea, a single edged combat knife in the 7-9” blade length in bead blasted CPMS30V or D2 with 304 stainless steel fittings, Micarta handle, and a tension fit kydex, aluminum, and steel sheath would start at $1600 and go up from there, depending on design, materials, finish, embellishment, and accessories. I also do the locking sheaths and variations and mounting options.

Ben, the problem is that currently, new orders are taking 48 months, due to a great demand and backlog. I have two options that you might consider: The first option is that I’m completing four new tactical knives (just finished the knives today and am starting sheaths tomorrow) that I will post for sale on the public part of the website. I don’t know if any of them would interest you; they are new designs.

Please let me know if you’re interested, and thanks again for your service.
Jay

His response:

Thanks for your quick response. 48 months is a long time to wait, but...by that time I'll probably be in my 5th combat tour and of course that would allow plenty of time for me to sock away enough to order up something truly unique and useful. During OIF 1 and OEF 6 I was a part of the 101st in the 716th MP Battalion out of Ft Campbell. I miss that place/unit quite a bit. I'll be making an attempt to go back to the "Peacekeepers" soon as I rotate back to the states. I'll keep in touch with you and we might be able to work on a design for the most highly decorated MP unit in the Army. I'll be keeping an eye out for the ones you post to the site and since I'm half way through this deployment now it may be just more beneficial for me to wait on a custom order. Thanks again for your time and thank you for all the information posted on your site. It's been extremely educational for me.

My response:

Hi, Ben.
If you don’t see what you like on the site in the next two weeks, let me know and we can work up a quote.
Thanks again for your service,
Jay

Top of Page

Jay,
I just wanted to thank you for the beautiful knife. I think your choice of handle was perfect. Every time I look at it, I see something new in the pattern, and the colors are so unique! As always, the workmanship is superb and the file work really adds to the project. I've got the Cygnus-Horrocks displayed along with the Mercator and Alegre and they look great together. Thanks again for the gorgeous work!
H.


Jay you need a section on your website that displays only "beasts" of this style. There is no way that you can accurately describe weapons of this style and be believed. Over the decades I have seen a lot of survival knives, military issue knives and knives made by self-proclaimed experts that are one time used and thrown away for all practical purposes. Your creations will last my lifetime and my heirs lifetime as well.
Thank you again!

Best always:
P.


Jay,
We just got back (took a little side trip) and I wanted to drop you a line thanking you for the tour of your shop. Very impressive. I really enjoyed learning about your experiences with the internet and plan to follow through on your advice.

You know… as I was going down to visit you, I was a little concerned I’d oversold myself on your knives. Once I saw them, it was just the opposite. They are even better in person. It is hard to explain. Even though I had seen them on your web and looked at the measurements, I expected a more massive, heavy feel to the knives. Instead I was treated to a refined, polished, mature, highly develop product. Most knives I want to “grab” and see how they function. But, yours I pick up with a sense of awe. It is like picking up family heirloom china, certainly not because I’m afraid of breaking it, but it is almost a sense of reverence and respect. I want to turn it over in my hands and absorb it. You are an artist and your knives your canvas.
C. Kramer

Top of Page

Jay,
The e-mail pages are hilarious and are my end of day giggle. Love your comments and the eloquence of your written words add a great deal of spice your website. Do you have elves make your knives at night? Either that or you are working on a 36 hr. day what with knife design and production, site maintenance, e-mail answering, writing, photography and all the rest you do for your business, Your site is truly a stupendous piece of work.

Seann Alden
Abbotsford, BC


Jay,
I received the knife on Saturday. I am very happy. Outstanding work. I would love for you to do another piece for me in the future.
Thanks again Jay,

R. S.


Got it today, Jay. WOW. The blade feels massive. Awesome... the blade, sheath and case all work together very nicely. I'm proud to own another example of your truly unique and special art work.

--D.


Dear Jay Fisher,
I'm writing this note to thank you for having your website up. It was so informative I felt as if I got an educational experience just reading through it. I'm just recently getting into knives and I appreciate your perspective. You are very thorough, finely detailed, and, for one reason or another, I believe your opinions are truthful. I have very little experience in knives: that is, very little knowledge of them.

I wasn't going to purchase a knife, or anything for that matter, without first learning about what I would be getting into. For that reason, you site has been most helpful. The only knife I have examined is the Navy Seal knife (SOG Knives E37 SEAL Pup Elite) because it sounded great with all the extensive testing the Navy has done to confirm the quality of the blade and handle... "tip breaking stress, blade breaking limit, sharpness, edge retention, handle twist off force, two week salt water immersion tests, gasoline and acetylene torch resistance, chopping, hammering, prying, penetration tests, cutting six different types of rope and line, plus an intense hands-on competition in the field." I know I have a lot more reading to do. But using that knife as a base, I did learn a few things, thanks to you: there is no military tactical folding knife; AUS 8 steel is nothing special, it's also known as 440B; the thinner the blade, the sharper the knife.

However, I'm still not sure about serrations. Is it a good thing or not. Would you rather have a knife with serrations at the end of the blade, near the handle, or no serrations at all. I understand that it shortens the cutting edge, it'll tear up the sheath, etc. But more importantly, what is the story with those semi-dull serrations that run along the top of the blade?

Black powder makes it looks fancier, but as you said, what it's really doing is covering up the blemishes. I know in (briar) pipe making this process is called rusticating. In this case, they are using hardcased Black TiNi, whatever that means. I have a lot more to learn. In any case, I simply wanted to thank you very much. I'll be going through your site and the links you've mentioned more closely.
I wish you well.
Thank you very much.
Sincerely,
J.S.

My response:

Hi, J. Thanks for writing, and thanks for your kind words about my site.

You've got a lot of good points from my site, and I appreciate that. This extensive "testing" can be done by anyone, anywhere, in any setting, and is in no way a field combat comparison of real world use of a knife. Most knives can satisfy basic requirements. For example, if a knife needs to withstand a breakage test, you simply leave it thick. It makes for a horrible cutting tool (chisel) but it will withstand "testing." Most of this stuff is just made up by whoever is selling the knife. After all, who is there to verify this testing and what is their experience, perspective, official qualifications, and reasoning?

About serrations: the decision is really one of personal preference. When I started making serrated knives for my military clients the one thing requested is that they actually cut, and if any of the teeth break off, they keep cutting. I developed several versions of serrations; they are thin at the tips, extremely sharp and can easily saw through oak or hickory hardwoods. Most of factory serrations are left thick (just like the blades) to save on machining expenses and time. They simply are ornamental. Any serrations on the spine of the knife are useless if meant for cutting unless it is first a double-edged knife. I've made those too, but they are highly specialized tools or artistic pieces. Could the "dull" serrations at the top of the blade you are referring to be filework, or jimping? If so, these are decorative or milled cuts to give some additional finger purchase on an otherwise slick spine, or are a decorative art form. For true blade serrations, they need to be incredibly sharp and aggressive, and a knife client needs to carefully consider if he'll need them or not. Few of my CQC (close quarters combat) knives have them, nearly all of my CSAR (Combat Search and Rescue) knives have them. I've heard of some of them used to saw through aircraft skins.

The black TiN you refer to is titanium nitride coating, used on machine tools for added abrasion resistance and added lubricity when high speed cutting on other metals with twist drills, milling cutters, reamers, etc. In knives and other such products, it's just ornamental and a way to avoid the expense of finishing.

Thanks for your inquiry,
Jay

Top of Page

The Double D Rio Grande is the absolute perfection of our agreed to style finish, Double D carving, and Honduras Rosewood burl. The sheath for the knife is drop dead gorgeous....you somehow came within pennies of our agreed-to price-
As a patron, I am grateful to own my Jay Fisher Collection at these prices!
Best regards,

D. T.


Jay,
This is Jared Lay; my family has bought several knives from you. I bought my brother, Jeremiah Lay, a PJLT Shank knife for him when he graduated the fire academy. Well, long story short, my brother uses the knife all the time and just had it with him in the Philippines, after the destruction. He went into some areas for rescue that were the first rescue people in. Just wanted you to know we love the knives you have made and that they are doing great work across the world.

--Jared Lay


Hi Jay,
I am now pleased to be able to confirm that your package, with the Menkar and sheaths, has arrived.
The Menkar certainly exceeds my expectations, which were already rather high, based on the specs and photos. The design is much more impressive in proprietary persona than in the photos, and I am not sure why you did not call it Diphda, unless that already belongs to ‘a larger fish’.  As you had indicated, it has excellent balance and a lovely feel, and I look forward to using it as a practical and elegant tool.

My thanks, and best regards,
D.


He who cannot dance puts the blame on the floor.

--Hindi Proverb

Dear Jay
I can truly say I have never seen such beautiful work before. I came on your page looking for knife cases and yes, I realize you don't make them. But I wanted to take a moment to say that you have an incredible sense of artistry. As a custom furniture builder, I have a bit of an appreciation for what you deal with - but you are way beyond anything I ever accomplished. I now am a manufacturer of mass produced outrigger pads and don't miss the hard times of building furniture. Anyway, great job, excellent work.
Bravo.

Bob Lifton


Mr. Fisher,
I received my knife today. It is everything I had hoped for and then some. It is beautiful. Thank you so much for crafting this knife for me. I am sure that this is an item that will be passed on through many generations of my family. My son already has his eye on it. Once again thank you.

T. G.


Jay,
I wanted to thank you for your for your amazing website! I have spent countless hours reading and rereading your pages and get lost in all the information you provide. I have learned so much from your pages and knowledge in the knife making world. So I wanted to say thank you from a new knife maker to THE master of knife making! Your knives are impeccable and your knowledge and techniques unmatched! I strive to, one day, be able to make a knife half as good as the great Jay Fisher!
Thank you for everything you do for the knife making world!

Chad Filler


Jay,
...I opened the box and went for the knife immediately.

AHHHHHH!  Just freakin' perfect size for me and my particular needs. The sheath needs a better call-out than 'Wow! Nice!' but that will have to come later in a follow-up.

Fits my hand like it was crafted just for me. Balance is perfect. A couple of careful swipes towards some of the packing paper, and more Joy!  The proprioception and kinesthesia feedback was Just! Freakin'! Perfect!

That not-so-little item was a lottery. I am astounded that the fit is so good. I didn't expect it, but I'm so happy with the fit I could just do a Snoopy Happy Dance. That great big slug of serendipity will save me many hours of work. Dialing in a new handheld impact weapon isn't like the Aegean stables, but it's not nothing, either.

Thank you so very much, sir! This is a magnificent knife!

With my most sincere thanks, and deep regards,
R. N.

And later:

The Krag is a marvel. This is some seriously high-quality work, by an obvious expert.


"Krag" professional tactical/counterterrorism knife, obverse side view in ATS-34 high molybdenum stainless steel blade, ghost slate finish, 304 stainless steel bolsters, black/red G10 handle, hybrid tension locking sheath in kydex, anodized aluminum, stainless steel, titanium
More about this Krag

Jay,
Thanks so much! The knife is gorgeous! I couldn't have asked for a better result.
As my son-in-law said when he saw the pictures, "It's a gift for a lifetime."
Thanks for the beautiful work.

-H.


Hi, Jay.
I received the knife safe and sound. It's perfect! The best way I can explain my happiness with it is to simply say that I would be honored if all my custom knives come from only your studio.
Cheers,

A.


Jay,
The Ghroth arrived yesterday, in good condition.

I unpacked it and my very first reaction was 'Whoa!'.My second reaction was that all my other blades just lost out to the trophy wife. Uh, trophy knife, sorry, a bit of a Freudian slip there.

The pictures did not at all convey the serious 'attitude' this blade has. It's been almost 40 years since I was intimidated by a tool.

This is not a 'duty' issue knife. It's a smirking, sinister, intimidating, PERSONAL threat, that I am so lucky to have that I feel I was blessed, or honored, or some such. Can't really find the words right off. This isn't just a chunk of stuff, it's almost alive.

Wow.

I need to spend some time gathering my thoughts, and see if I can articulate this experience more clearly.

Until I get my words under my fingertips, you will have to make do with 'Thank you'.

It's not nearly enough, but more will take some time.

Thank you. More to follow.

--R.


(No introduction)

I like the idea of bluing the blade to make it darker but I'm wondering, exactly how much more resistant to rusting will an O-1 steel blade be after Hot bluing and mirror polishing? After Hot bluing and mirror polishing an O-1 steel blade would it be as forgiving as a blade made from ATS-34? If I understand what I've read correctly D-2 and O-1 are the only steels you hot blue since 440C and ATS-34 are stainless steels? I just don't like the idea of spraying the blade down with silicon spray or some kind of oil/wax, what a mess. On long camping or hunting trips I might not have any of that stuff handy on top of that.

I have a folder made out of 154CM which has not rusted even after touching it with sweaty hands and forgetting to wipe it off for a day or so. Would a hot blued and polished O-1 steel blade be comparable to my 154CM folder in terms of "forgiveness"? When I first got it that sort of worried me. The box it came in warned me with big bold letters about rust because of a higher carbon content, but it hasn't happened.

My response:

Hello,
I don’t know your real name because you neglected to include it, yet you felt the need to write me this lengthy commentary, so, with respect, I’ll respond. You are correct about bluing. Bluing is a passive oxidation process, meant to inhibit corrosion, not prevent it. Yes, blued blades are just like blued guns. They will corrode and rust if not properly cared for. That means keeping the blade dry, perhaps oiled or waxed, just as you would a fine firearm. In no way does this compare with stainless or stain resistant steels like 440C, ATS-34, 154CM, or D2

You’re wrong about my claim that I blue D2 and O1. I only blue O1 and low carbon steels. D2 has 12% chromium and is therefore is a stainless steel. Even the name “stainless” is a misnomer, because in order to be classified as a stainless steel, the steel has to have over 13% chromium for aqueous exposure. Is that a magic number where corrosion automatically stops? No, of course not, it is just a benchmark used in the professional machinists and ANSI specs to classify steels. ALL TOOL STEELS CAN RUST AND CORRODE, EVEN STAINLESS STEELS! If you leave orange juice or blood on 440C, it will flat out rust and pit. Store the same corroded knife in a damp leather sheath, and your stainless steel will be reduced to a rusty bar of junk. It’s all relative. There is no absolutely corrosion-proof tool steel, but there are austenitic stainless steels that come close (like 316 and 304), but these are not hardenable, and not tool steels.

You say you don’t like the idea of having to spray or wax your knife blade, are you the same way about your firearms? Do you just neglect your blued firearms and let them rust? And you claim, “what a mess.” You’ve obviously not used any of the modern preservative products, because there is no “mess.”

Back to your initial question. Bluing DOES inhibit corrosion, and mirror polishing helps. After 25 years of experience making knives, including for active duty combat military, and having made about two thousand knives professionally, I can say that the owners of these knives are quite happy with the blades. Yes, they know that they have to take care of them, and even during long excursions, the steels hold up very well. It’s all a matter of preference. Some guys even like the patina and used look that comes with a high carbon alloy tool steel like O-1.

Your folder made of 154CM is essentially the same steel as ATS-34 in alloying elements. Since it usually contains about 13% chromium (ATS-34 Contains slightly more chromium , about 14%, so it is a little more corrosion resistant), that is why they included the warnings about rust on your box. The comment shows, however, how illiterate the company is about their own product. It isn’t carbon that makes steel corrosion resistant; in modern tool steels it’s the amount of chromium and other alloying elements as well as hardness and exposure to corrosive environments that determine how a knife blade resists corrosion through the years. The carbon is secondary to the chromium and exposures.

An O-1 blade, by the way, cannot and does not compare to 154CM, they are completely different tool steels. O-1 is a high carbon, high tungsten-vanadium alloy tool steel, and its main benefits are: ease of sharpening in the field, capable of a razor-keen aggressive edge, low initial cost, uniform hardenability with repeated tempering options, ease of machining, low overall cost, and ability to be …. Hot blued.

My name is Jay Fisher

Top of Page

Mr. Jay Fisher,
I really love all that you do and what you have put into your website. I am not asking for anything nor have questions for you. I just want to say "THANK YOU!" and that I highly admire your skills, knives, and information that you have put out there. I recently starting knife making (as a new hobby), and came upon your web page as part of my research. I know my opinion doesn't mean much, but I see you are the benchmark and gold standard of the field. I just want to thank you for all of your information on your website. I have spent hours reading and admiring your artistry and craftsmanship. Someday, I would love to own one of your pieces. Thanks again for everything (even the emails page, for a laugh).
No response requested. I hope you have read to this point to know that people appreciate you for you, as well as your standards and dedication of your trade.

Thank you and God Bless,
Noel


Dear Jay,
I finally found some time to write back to you. The parcel was opened by the authorities and resealed. They certainly checked it judging by the way they put the various pieces back together. They were probably as astonished as I was when they held this knife in their hands. You describe it on your web page and many customers confirm the experience in writing but unless you touch and feel a Jay Fisher knife you don't really know what this all means. I will recommend those knives to everyone that I trust to own such a wonderful piece of art. I came to you not because of what I wanted but because of who you are. This quote is true for me too and I am not disappointed. I am really happy to have had the chance to meet you through the internet and also talk to you.
When I hold that knife in my hands I know why the best soldiers and rescue services trust it. Having been both a soldier and a fireman for many years I have a lot of appreciation and understanding for the quality and "finesse" of that knife.
Dear Jay thank you for making me a member of your client base. There are many more thoughts that I would like to share with you but for now I just want to express my gratitude for your outstanding service (many businesses could learn from you and you could add client relationship expert to your credentials) and your high quality art work

kind regards,
M.


Jay
I am a novice knife maker who was losing heart a little bit as I am in a very small town and there is nobody within 400kms to help. I have spend the last two days glued to your site I think I have read every word you have written. I hope you don’t mind but I took a couple of your pictures as motivation to put up in my shop and also use as screen savers.
Your work is mind blowing, I was a bit skeptical about the Gemstone handles at first but as I saw more pictures you really made a convert out of me.
Thank you for the inspiration I will be visiting your site often
B.P.
Queenstown, New Zealand

P.S. I just saw your “Cattleman” Holy crap………….. that is the most beautiful knife I have ever seen.

My response:

Hi, Byron.
That was an art piece, but the same cattleman got the working model, too. He’s castrated hundreds of animals before he sent it back for sharpening. A few passes on the stone and it was just like a razor again!
Here’s the pic of the working model.
Thanks,
Jay

Top of Page

Hello Jay,
I am just starting out in knifemaking, and I would just like to say thanks for the inspiration. Every knifemaker should visit your site to see what real craftsmanship and damn good knives look like.

--Trevor Walsh


Jay,
The knife is brilliant. I love the balance and feel of it. It's small and quick but tough enough to get the job done. I am very well pleased. Thanks so much for working on this project with me.
Cheers,

--E. C.


Jay,
The Zeta arrived today. Absolutely impeccable work! Amazing fit and balance in the hand, and you are right, it seems to beg to be used. It practically screams indestructibility when held. The blade shape and finish are amazing, and I especially like the thinned taper at the tip. I was not expecting the sheer beauty of the O1 steel after your hot bluing process. I've never seen anything like it. Great choice on the Sunset Jasper handle scales. Simply gorgeous with so many dimensions. All in all I love this knife! It is now the centerpiece of my collection. I look forward to the next order with you!
Thank you, and please keep up the great work!!

--B.


Hi Jay,
Streamspear arrived today and I am very happy with it! This is a classic as well as a very classy knife.  The class starts even with unwrapping it. The leather sheath itself is beautiful and in the fabric bag makes you feel like you have something really special in your hands. I think that only a knife lover can appreciate the true beauty of a knife like this and appreciate the craftsmanship and skill that has gone into making it. I have to say again the knife is beautiful! The spear point is a very clean design and all aspects of it are perfectly symmetrical. The double edge is perfect as well, and is easily the sharpest knife I own. The filework really gives it the extra class. The balance is excellent and even though it is a longer blade it is still easy to hold. The dolomite handle is beautiful in itself and adds to the overall appearance and class to the knife. And when you said it had a mirror polish, you were not kidding!

All in all, a great knife and something that will be the centerpiece of my collection. I will be watching for more knives for sale on your website.

Thank you Jay,
--J.


How old do you think a person should be before getting then a knife, dagger, or sword?
--C.C.

My response:

Hello, C. Thanks for writing. I think it would depend on the person's parents and their upbringing. Some parents realize they have responsible children, and to have a tool which can be dangerous requires great care. I guess a good answer would be when they are old enough to know how to use a sharp kitchen knife.
--Jay

Top of Page

Hello, Jay,
The knife looks absolutely fantastic! Definitely well worth the wait! Again, fantastic work!

--M.


Thanks Jay, she is a beauty. The weight distribution and craftsmanship are great.
Now I would like to work on the next knife.

Thanks,
R. S.


Jay,
The knife was absolutely beautiful, pictures can't do it justice! The "Raptor" is a surprisingly light knife when in the hand and leads to quick maneuverability regardless of hand position. Despite the light and quick feel, the spine is substantial and in no way feels weak or fragile. As usual, the fit and finish is perfect and the grinds are beyond description! The Lapis inlay really sets the knife apart with the particles of pyrite and other minerals. The sheath looks SO much better in person! The brown against the black caiman inlays both front AND back compliment each other beautifully! In summation, this knife is now the pinnacle of my growing collection of Jay Fisher knives!

Thank you,
A.


"Raptor" reverse side view in CPM154CM powder metal technology high molybdenum stainless steel blade, 304 stainless steel bolsters, Peruvian Lapis Lazuli gemstone handle, hand-carved leather sheath inlaid with Caiman skin

Hello Jay,
My name is Donnie Owens; I am a disabled US Marine and served in combat in Iraq. I have been a x-ray combo pipewelder and bench hand for the better part of my life. I am a HUGE knife guy and i just was reading your article on knife testing: very, very well done. I have been doing some blacksmith work at my house recently (2-3 months). I just wanted to say I really, really love your knives. I don't want anything from you, just wanted to let you know that everything that I have read has been 100% true; I like that. I would one day like to purchase one of your blades. Anyway, that's really all, if you have any pointers or information that you would like to have had when you first started, I will listen. That is all. I hope you have a good day and i will get back to your website.

Thanks again,
Donnie Owens 

Hi, Donnie.
Thanks for writing and thanks most for your service and sacrifice for our country.

If there were one piece of advice I could give that I wish someone had told me when I started 40 years ago would be don’t set limits. There is no limit to what can be done when we truly love the craft. As a young man and beginning maker, I thought that what could be done with knives and what I could do would be limited, and that I could only go so far. I was amazed by what happened when, day after day, I worked in the field I love. I’ll also admit that I didn’t realize how important it was for me to create these pieces, and consequently, how important they would be to their owners.

Thanks again,
Jay


Good evening,
At the beginning I want to apologize, I will not buy any of yours knife at this time( and I'm not feeling well with that, believe me).
I writing to you with thank you. You create so beautiful masterpieces that I never have seen. Due all my 19 years on this world I couldn't even imagine weapons with that kind of grace. Thank you for all your kindness in showing it to me:) I hope that I will be one of your customer in future:)
Regards from Poland
B.S.
P. S I'm sorry for every grammar and lingual errors in letter.

Top of Page

Howdy Jay,
Short version:
The attention paid to every detail during the creation of this package (piece of kit) is perfect. I am speechless. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
More comprehensive evaluation:
The sheet of paper included with use / care instructions written by Tom Clancy sums up your blending of old school craftsmanship with modern materials. My understanding of old world craftsmanship has it's roots in my youth. My parents moved to a farm house in Eastern PA when I was eight years old. I still own that property. That house was built in the 1700's and has three foot thick hand laid stone walls, so every window sill is a place to sit, if one wishes. My neighbors are Amish and their barn burned down one fall (wet hay). Within two weeks the community had the structure replaced, no heavy equipment, just men working in the woods with women providing support. Nice way to grow up.
Back to your blades:
Willow:
As you may recall I have one of the Willow blade / sheath packages. Creating the Willow series must have been challenging, just for the tiny size alone. The comparison of the new and older sheaths also provides a historical development cycle that has moved towards more artistic/aesthetically pleasing and durable products.
Hooded Warrior:
I am trying to break through "speechless" mode. Each work you craft takes on a unique character during the process. I have seen other examples of the Hooded Warrior pattern and they differ in subtle ways. The blade is so beautiful that I'm tempted to never use it. At 61.5 HRC it should perform extremely well, yep, I can sharpen that. I've been sharpening most of my life, I now follow the recommendations of John Juranitch, I cheat a bit with a 1" X 30" grinder when I can.
The leather sheath is perfect for display or dress wear. I have no idea where I would don that tool in a more formal setting, I think you get my drift. Set aside the fact that I avoid "formal" stuff. Not my cup of tea.
The field sheath speaks differently to me. That sheath is for me, a working man. The blade and sheath are a team. I do not know of any other craftsman that marries the blade and sheath this well. I wish to thank you for allowing me to purchase this package. This is a most suitable piece of kit for my future needs.
This is my Hooded Warrior.
There are others like it.
This one is mine.
I sincerely thank you.
That is all.

B. S.


Mr. Fisher,
I just wanted to tell you that your work is quite exceptional. I found your site when I was doing a search for embellished knives. I am just learning to engrave and carve and it is always interesting to see what others are doing along those lines. My husband makes knives occasionally and we enjoy the beauty of a well made blade.
I started reading your first page of funny emails you posted and decided after reading the first page I should stop as I was laughing too much.
Your knives are quite beautiful and I really like the engraving you do. Not everyone likes the 'flowers and scrolls' and that doesn't always fit the weapon anyway.
Anyway, just wanted to let you know that I will use your pictures as inspiration to do my own kind of work. Thanks for sharing your work.

Sincerely,
Sue Schroerlucke
Sidney OH


OMG. This is maybe the best knife I have ever touched in my life. Balance seems great, and I really want to go find the chopping board and start getting familiar with it. It's stunningly gorgeous. The pictures you took are excellent, but they can't convey the unified sense impressions that come from holding it in the hand, feeling the weight, amazed by the perfect combination of handles and steel polished so bright and perfect it must be a dream.

Thank you so very much for selling me these knives. I am somewhat at a loss for words to describe these. Perfection made real, in my hand. Wow.

And later:

I did a little practice chopping with the Sirona. That is one very precise, authoritative knife. I never had a well balanced chef's knife before, and I can tell it will take some time to get back to the feel of chopping where the knife is not the focus of my attention, but is spent on the details of the cutting of whatever.  

It looks fantastic on my counter. I have a green synthetic granite counter top, Silestone, and they go very well together.   I am  happy that I had the opportunity to buy such great knives from you.

And later:

Last night I moved the Sirona, on the base, to my office side table. I had study and paper work to do. Every few minutes or so, I took a look at the Sirona and base. You seem to have more artistic talent than the average bear. Beautiful and useful.   Someday I'll maybe consider moving it back to the kitchen. I spend the larger part of my days in the office, and it is where nearly all of the artwork and sculptures I have acquired over the years live.

Cheers,
--R.


I came across your website and I will add my praises to those of others. I've looked around and it has given me much insight into the work, time, and effort that goes into making a true custom knife. I hope to have a knife made by you in the for-see-able future. I have looked at ordering a knife and have only a few things of how I want my knife to look like set in stone. Just from looking at the many pictures on your site has really turned me to having a knife made by you.
W. H.

W.H. is a future client, and I look forward to making a knife for him!

Top of Page

Hello Jay,
I’m contacting you to give a little review about your Orion knife.
I absolutely LOVE this knife! It appears much better in person than your photos give credit for. My camera is very bad and doesn’t capture its true beauty at all.
It feels extremely awkward holding my other blades now. They just feel… weird. I love the intricate and ornate artistic elements on the handle, the blade shape, and the designs on the sheath. The most important thing is both are much more solid than any blade and sheath I’ve had before. The entire thing is amazing, and there are no flaws, major or minor, that I can see. The knife is pretty heavy, but I like the weight to knives if done right. (And here’s a hint: you did it right!)
There is nothing I have that compares to the extreme quality that this knife has.
I can appreciate art very much, being an artist myself. I appreciate all the work, time, and effort that is put into any form of artwork. You are an excellent knife maker with excellent service.
I wish you well on your knife making and for you to be able to work with your passion for as long as possible. Keep it up and don’t ever stop!

Thank you once again,
-J. K.


"Orion" obverse side view in 440C high chromium stainless steel blade, hand-engraved 304 stainless steel bolsters, Rio Grande Agate gemstone  handle, hand-carved leather sheath inlaid with frog skin
More about this Orion

From one of my clients on seeing his knives under construction:

Wow oh Wow; and here I thought you weren't doing any work.
Magnificent work product. The handle is beyond anything I imagined especially the two stones so well mated. You have no idea how much pleasure I get from using your knives. They are a thing of perfection. That you can convert from concept to concrete form an object so admirable is a mystery to me. I pay for magic tricks, you see.

--B.


Oh my God! It is beautiful! I love it!!!!!!!!!!!!!!!!!!!!!!!
It is PERFECT. I could not have asked for a better representation. Even the name! Perfect. I cannot wait to hold her.
I cannot wait to see it in real life. I am nearly giddy!
-and-
It is here! And it is beautiful! Thank you!

--M.


Hi Jay,
The knife arrived and of course I am in awe of its beauty and your work.  As beautiful as it was in the pictures, the pictures pale in comparison to seeing it with the eye.  Your passion for your craft shines in the quality of your work. Your creativity takes that passion and turns it into art.  I am grateful to own a piece of your passioned art.  I’ll keep an eye on your web site for your future work…my Bulldog might get lonely all by herself!

Thanks,
S.


Mr. Fisher,
I have spent the past few days perusing your website. My brother told me about you and sent me a link. When he told me that you made gemstone handles well, frankly, I thought it sounded stupid (sorry, read on). I envisioned gaudy baubles fixed to sterling silver handles. Then I visited your site.... When I saw your work I was blown away. I've never seen any comparison whatsoever. The amount of skill and attention to detail that you demonstrate at every level of the process is just staggering. In particular, when I saw the Altair knife with the Pietersite Agate Gemstone material, I thought that God must have made such a beautiful stone knowing that we men would, one day, work it into art. What other explanation could there be for such a stone. I have never seen such craftsmanship. I hope to save enough to purchase one of your beautiful knives one day soon. No need to reply. I'm sure you're very busy but I wanted to give credit where it is due. Its important to note that I've always been fascinated with knives and I began cutting a few myself last year. I guess we all start somewhere but I felt like a monkey with a wrench after seeing your work. It is incredible. Keep it up.

Sincerely,
Matthew Hassoldt
Torrance, California


"Eridanus" obverse side view in 440C high chromium stainless steel blade, hand-engraved 304 stainless steel bolsters, Plasma Agate gemstone handle, Elephant skin inlaid in hand-carved leather sheath
More about this Eridanus

Jay,
I looked over your website and read your biography and you are an inspiration that I understand. Having gunsmithed in the past specializing in refinishing and sporterizing, I appreciate what you do. Now that I discovered knife making about five years ago, I can't get enough. Your work is simply awesome.
Regards,

--Phil Adams


Hi Jay,
Furud arrived yesterday, absolutely stunning.  Appreciate the printed materials along with the tag.  This knife will hold center stage in my collection, at least until another Jay Fisher knife surpasses this one.
Holding this knife makes me realize what I have been missing in the other lesser knives I’ve bought.  It’s time to scale back on quantity and focus on quality for the collection.
Thanks again and best wishes for the holidays to you and your family.

-R. T.


Hey Jay:
I just opened my package and am completely blown away!!! Your craftsmanship and symmetry are incredible. Your sheath work is fantastic. I absolutely love the inlaid ray skin and the IWB variant for the Vindicator. Your tactical sheathes are perfect. The balance on each blade is so beautiful. Easy to translate grips and move back and forth to the sheaths.
I enjoy showing off your detailed filework. Sets each knife off for sure and shows how absolutely a perfectionist you are.
I am truly honored to own your blades. I will use them and protect them to ensure they remain ready for my next generation!
Thank you so much for your work.

Best,
J


Every now and then, I get a letter that moves me. It is one of the reasons I'm so hard on factories and other knife makers about their work. It disturbs me greatly to know that our men and women are not carrying the best knives into battle that this country is capable of producing. Here's one of those letters and my response.

Sir,
I'm currently deployed to Iraq and found that a back up is a must have. I work in closely with the local population and my weapon at time's cannot be used due to distance or situation. I have a fainbrain-Applegate full size fighting knife now. I read your web page and you seem to know what's going on with knifes and sheaths. The problem I have is: I don’t have the proper sheath. I need a combat locking sheath like in your pictures, so I can access my knife in a split second. The best and most concealed place while in IBA is the small of my back. Mounting the knife horizontal on my belt seems the best. If you have any ideas on what to do or a different path to take please let me know.
-TSgt H.L.
Ali AB, Iraq

My response:

Hello, TSgt L. Thanks for writing. And thank you for your service to our country.

Your letter hit me hard. It is truly sad that manufacturers and makers of knives do not carefully consider the sheath when making and selling their knives, and do not consider the lives that may be at stake because they do not supply an adequate or useful sheath. All I can do is not make that mistake on my own knives.

I’m sorry that I can not make a sheath for your knife. My locking and combat grade sheaths are constructed with the knife, in concert, so that components like thumb rises, ricasso ramps, edge clearances, and mounting variations must happen in the construction of the knife, so that a workable locking sheath can be designed around the knife, with the knife. Each individual sheath can only fit a specific knife. Unfortunately, I cannot build a sheath around a factory knife or other maker’s knife, as they don’t build the knife with the components and geometry that will allow a locking sheath to work. Beyond that, I get so many requests to correct inadequate sheath work that I would be out of the knife making business, and into the sheath making business only. Even if I did take on that type of work, it would require the knife in my hands while you would be left in the field without your primary edged weapon.

I do make an extremely good combat knife, and can make it to your specifications, to fit a specifically designed locking combat sheath of my own construction. I know my work is not cheap, but I’ve got one of the best track records of useful and durable combat and tactical knives and sheaths in the business.

I know this does not help you at the moment. In the chance that they might be of help, I would contact the company or maker who made the knife and ask them to outfit their knife with a proper sheath. Please be brutally honest in their shortcomings of the sheath they supply for their knife, because it is your life and other lives at stake.

Barring that, you may have to do what I’ve heard of other soldiers doing in the field: using found parts, moleskin, leather bindings, bent metal, screws and other parts to make their sheaths work. I’m terribly sorry I could be of no further help.
Jay

Top of Page

Dear Jay,
The knife arrived and it is spectacular! I look forward immensely to using it in the field. You were right to point out that is is an extremely robust piece of kit.
Sincerest thanks.

--M.


Hi, Jay.
I just wanted to let you know how much I've enjoyed having Pacifica. Since I've had it, I've had to take a step back and admire it a little bit every day. I have to tell you that it's received mixed responses from those lucky enough to see it first hand (that's one of the things I love about it). I think that with fine art, there are people who get it, and people who don't, but once I explain what it is and what it represents, there's a definite appreciation for it. It truly is more than a knife. Pacifica is a work of art. I look forward to my next purchase from you! Till then, thanks for everything.

--J.


Hi Jay,
It just arrived in Wednesday morning. What a beautiful knife. Outstanding work and Craftsmanship! My Nephew arrives in on Monday. I am looking forward to giving it to him. Thank You again and Merry Christmas.

--J. O.


Hello Mr. Fisher,
Thank you for your willingness to share your knowledge through your website. I have learned so much and have had my view on knives permanently altered by the knowledge I gained from reading your website.

I will begin the same way as many of letters you receive by saying “Thank You!” Your website and the information you provide are extremely appreciated. Factory made knives are ruined for me now that you have provided a framework for me to logically think through what they are offering. I will admit that I was taken in by what you refer to as the “mysticism” of the knife industry until I read your site. I am a mechanical engineer for an aerospace company and as I read your site, all of your arguments were logical and matched to everything I had been taught in school. My whole perspective on what a good knife is has changed.

--T. S.


"PJST" tactical csar knife, obverse side view in 440C high chromium stainless steel blade, 304 stainless steel bolsters, canvas micarta phenolic handle, locking kydex, aluminum, stainless steel, nickel plated steel sheath

I served my apprenticeship as a tool maker (7yrs) which included a year or two of Metallurgy, but after 20yrs I believe I know craftsmanship when I see it . The quality of your production is rarely seen these day and way beyond what I have seen produced in the UK, it’s the combination of the design and finish that I haven’t seen.. I hasten to add that there are some very good cutlers but the designs are limited .. even made a couple myself but don’t have the “eye” for it. I don’t see it as flattery more a positive critique based on observation... just don’t put the price up as a result!!
Rgds,

Steve W.

Jay,
I came home to a package on my door step from you. My god your craftsmanship is just awesome!!! Flawless design for this blade, very clean lines and honed to perfection. I love it!!! I can't wait to try it on some materials at work tomorrow, so far just 3x5 index cards have met there maker. The handle fits me like a glove and feels very secure. The sheath is awesome very sturdy and ridged, awesome locking mechanism by the way. Very clever design and boy is it effective. I have sheathed and extracted the blade with bare hands only tonight, I will try gloves tomorrow to see if I can get it out (I've got fat fingers).
Jay you are one hell of a craftsman, you are truly a master at your art. You poured so much energy into this piece for me and I am positive you do the same for my brother's in arms everywhere.
Thank you again!!! I'll be in touch with testing results on different materials.

--V. M



Hi Jay,
I don’t expect that you will be able to respond to me as I am currently not looking to purchase one of your knives, though if I had the money, I would do so in a heartbeat.
I just wanted to drop you a line very quickly and say that as an aspiring knife builder myself (yes, unfortunately it’s only a hobby for me), I think that you have made some of the most exquisite and beautiful pieces of art that I have ever had the honor to look at. I truly hope that one day, I can have as much talent in the art of knife and sword building as you have in just one of your pinky fingers. The pieces you have on your site are absolutely breathtaking.
Thanks for doing what you do and I hope that you continue to grace the world with your talents for many decades to come. God has truly given you a wonderful gift.
With much respect and admiration,
M.E.

My response:

Hi, M. Thanks for writing, and thanks for your very kind words.
Welcome to the world of knife making. I pray that good things happen to you in your endeavors, and you get as much enjoyment and fulfillment from knives as I have over the years.
Sincerely,
Jay

Top of Page

Transcript of a voice message:

"Jay, this is C. P., and I just got the Flamesteed. Let me tell you what: you see it on the website all the time, but it was worth the 14 month wait... well worth it. That knife is gorgeous. I actually did not think it would look so awesome... its balance... I'm beside myself; I'm giddy! Anyway, I thought I'd give you a quick buzz and... it's awesome, just awesome blade... I love it. I almost don't even want to use it, but I definitely will; it's going to be my deer knife, and whatever else knife. Awesome... exquisite!"


I am truly stunned. Gorgeous piece. Wowww. That's nice....thank you for your time, skill, and effort.

--J


Dear Jay,
Your knife site is frankly dangerous. I have lost myself for countless hours reading and ogling your website and learned more about knives and knife making in the process than I thought possible. I especially love your simple, clean and extremely verbose technical style.
In the world of knife making your site should be listed as a cultural treasure.
Regardless, thank you from the bottom of my heart for one of the best websites on the internet.

Sincerely,
Aaron Young


Jay---
Thank you, thank you! Your website is the most informative & easy to understand & set up to be user friendly. I was just surfing to find information to purchase skinning knives for my husband and me and found myself staying up late to learn more about handles, blades, steel types, uses, etc. There is much more to a knife than I thought, and you make it interesting.
Any suggestions for a couple of farmers? We put down & field dress our own pigs & steers. We use drop point B*** knives and I find myself constantly walking back to the table to sharpen them during the process - we usually take care of 2 pigs at one time. Would like good quality, don't mind sharpening a couple times, need a handle for my husband that is easy to hold onto - he has arthritis & his grip is not always good.
Would appreciate any comments or suggestions from you.
Thank you again for your awesome website - you have sparked a new interest for me.
K.

My response:

Hello, K. Thanks for writing and thanks for your kind words about my site and work. K., there are several reasons that a knife will not hold an edge throughout the tasks you describe. The first and most predominant issue is usually the blade grind. The blade at and just behind the cutting edge should be thin, particularly with skinning, fleshing, and butchering knives. This will allow a very low edge face angle when sharpening, and thus, a very keen edge. Factory knives simply are not ground thin enough, because it takes a lot of skill and careful practice at the grinder to do this. Factory knives are quickly and lightly ground, quickly machine sharpened, and sent out the door. They are built with the expectation of one to two seasons of use and then they hope you’ll purchase another. They cannot be successfully and continually resharpened without first correcting the thick blade geometry.

Another concern is the steel. B*** makes most of their knives with 420 stainless steel. This is a very poor, cheap, and inferior knife steel, no matter what their web site claims. It does NOT have excellent wear resistance; it has poor wear resistance. This is due to a lower chromium content, so the very hard and wear resistant chromium carbide particles simply are not present. It cannot compare to many of the finer stainless tool steels like 440C, ATS-34, or even D2. It is the same steel used in cheap kitchen knives from China, so that should tell you a lot. The reason that they use it is probably because it is very inexpensive, and can be stamped out of sheet with a die press, so high production runs of blades are less expensive to produce. Compare this to the steels I just listed, which have to be sawn out individually with high cobalt, high alloy saw blades. For the user (you), this translates to a cutting edge that simply does not last due to low wear resistance.

A third concern is heat treating. How the blade is heat treated often remains unknown, and undisclosed to the customer. Is the blade the proper hardness? Unless it’s tested on a scientific, calibrated hardness penetration tester, you can’t know.

Okay, I’m sure you get the picture.

What I would suggest depends on what your specific needs are. If you want a blade that can dress 3 or more pigs without sharpening, you’ll have several choices that should be able to perform. If you’re after the ultimate in wear resistance, D2 or CPMS90V are hard to beat. These steels will maintain an edge for a very long time, but when they do need sharpening, usually a diamond hone is required. If you need a tougher, thinner blade, ATS-34 or CPM154CM can be ground very thin and are less brittle. There are others, of course. I remember many years ago, a professional elk hunting outfitter had me make him a skinning/field dressing knife from 440C. He had a B*** knife that he had to sharpen three times to get through a single elk. With the 440C blade, properly ground, heat treated, and finished, he dressed three elk without ever touching the blade…

For a custom handle for your husband, it sounds like he’ll need to get an idea of what shape works for him. For instance, can he grip a shovel handle easily, or does it need to be larger? How about the size of a pickaxe? This customization would only be available through a custom maker.

For your consideration of my work, a medium sized drop point (4” long blade) in bead blasted or satin finished 440C high chromium stainless steel blade, 304 stainless steel bolsters, and hardwood or manmade material handle with a border tooled leather sheath would start at $1245.00 and go up from there depending on pattern design, materials, finish, embellishment, and accessories. Currently, my sole authorship knives are quoting a four year delivery period due to a large queue and high interest, but I have several alternate programs in the studio that can deliver a knife in months instead of years.

Please let me know if my work is within your scope of interest. If not, please do find a custom maker who can get you the very knife or knives you need for your important tasks!

Thanks again,
Jay

Hello Jay:
I received the "Kid" on Thursday afternoon ... I was stunned by the quality of the knife. I showed the knife to several co-workers who were also extremely impressed. The hook, I was informed, should be used for opening a deer or large fish up. Your web site cannot show the quality or feel that your knives have. Thank you for finishing the knife and getting it to me on time. It will make the trip with me!
Yours truly:

--P. K.

P.S. Please make the "Hercules" any way you want! Whatever etching you choose will be fine. I trust your judgment completely!


Hi Jay!
Nishi has arrived!  What a great knife!  The Sonoran Flame Agate is a beautiful gemstone and really makes for a very distinctive appearance.  The engraving is awesome and complements the gemstone beautifully.  I cannot say enough about the excellence of the engraving.  I like the way you have done the filework, from the spine of the blade all the way around the tang and back.  The blade itself is very impressive and really sharp!  The overall feel in my hand is really great and feels like a really solid knife.  The sheath is a work of art in itself, very nice!  I cannot wait to show friends. 

All in all Jay, I feel this is not only a very functional knife but a work of art in steel and stone.  

Thank you for this beautiful knife.

--J.


"Nishi" obverse side view in 440C high chromium stainless steel blade, hand-engraved 304 stainless steel bolsters, Sonoran Flame Agate gemstone handle, hand-carved, hand-dyed leather sheath
More about this "Nishi"

Hi Jay,
I received the knife, Thank you. It's gorgeous as I knew it would be.
You say you miss it already? Don't worry, it's in good hands. Talk to you soon.

--J.


Dear Mr. Fisher,
I'm 19 years old, and I've just arrived back in the states after working on a mission in Western Africa for the last six months. I've been forging knives out of carbon steel since I was 15, but after returning from a place on the equator line where they all rust, your site has been most helpful in helping me understand that quality stainless steels are not only a corrosion resistant alternative, but also more than durable comparisons (if carbon is worthy of comparison at all, which I'll soon find out).
In addition, your latest page, 'funny emails' and your cleverly placed comments between the lines is simply hysterical! The woman building her relationship with a man that was begun with a sue-worthy design on a paper napkin is a winner. I'll be reading some of these aloud to my family around the dinner table tonight, and have no doubt they choke with laughter the way I did.
All in all, I would like to personally include my thanks among the many others who have also done so, for your site is very informative and inspiring to both aspiring craftsmen and adventurers alike, not to mention the new element of clean, tear drowning entertainment. Stay sharp!

Joseph

P.S. Please forgive me for any ignorance on my part in case I've missed something that already exists, but if you ever have a subscription option, even a paid subscription, I'd definitely be interested, as I am positive countless others would be as well. It's rare to find a site that is bursting with legitimate information and good humor.


Mr. Fisher,
Would you please send me a brochure/catalog? Thank you in advance!
I do have one quick question: If someone wanted to purchase custom knives for investment purposes, is it a better idea to commission these knives rather than buy from the maker's stock? You are by far my favorite knife maker. Have been for years. I think your philosophy and endorsement of gemstone handles makes perfect sense.
Aaron T.

My response:

Hello, Aaron. Thanks for writing. Thanks also for your kind words about my work.

To answer your question, it makes no difference from the standpoint of investment value and appreciation of a collector's knife whether the knife was custom made or purchased from the maker's inventory. You'll get the lowest price from the maker either way, because as soon as the knife goes to a dealer or a collector, the price goes up.

The differences are that by ordering a custom work, you'll get exactly the knife you want, but if you see one you want in inventory, the big advantage is that you don't have to wait for delivery. For example, right now, my orders are running 9 months to a year. Several steady clients have put in extra orders because they believe my order period may be two years soon, and that can be a long time to wait for a knife.

In addition to the brochure, I'm sending you my CDROM catalog of my work, no charge. It's a full CD with over a thousand pics of my work. Let me know what you think of it.
Thanks Aaron,
Jay

Top of Page

The filework is atypical, and I have not seen it on your site before. It is really special.
Love your work... worth waiting for... well, not that long... The Dragon came out great. Thanks!

--B.


Mr. Fisher, 
Thank you for ruining me. I was blissfully happy in my ignorance. Now through your fantastically informational website I have become a little less ignorant on knives, steel and what a true custom knife should be.
Wow! You are an artist. Period. Knife, sheath, stone and photography are extremely difficult to surpass.
I found your site doing a search on Buck Knives steel. I had noticed they didn't look or perform like my old, old, old ones. 420HC vs. 440c. Reading a few forums, I immediately knew I was reading opinions and bunk, not facts. Eureka!!! 440C a love hate relationship. Now I know facts. The knowledge I have gained in a short time has really, really been more than enjoyable. The carbide molecule sharpening too funny!!! Ignorance can be cured.
      One day soon I hope to find the funds.

Thank you Sir.
Chris Williams
Red Bank, MS


The Shaula impressed me most with its featherweight lightness and apparent strength, and its fine, elegant and simple form. Surely as sharp or sharper than a surgeon’s scalpel, yet effortlessly wielded with precision, I foresee its constant companionship primarily as a fine dining implement. In my email, I believe I mentioned some Kobe beef and a ’55 Cheval Blanc as an adjunct to my upcoming birthday, and I was quite serious about it. I believe I may also find it occasionally useful in some of my exacting model-building work. Similar compliments as those made for the Sargon apply with equal validity to the Shaula, with regard to the spine filework, engraved quillons, and flawless mirror finish. However, without natural sunlight for proper viewing, I can only roughly observe the optical qualities bestowed by the mica-infused fuchsite/ruby scales. So I have something more to look forward to tomorrow.

--G. L.


From a military address:

Mr. Fisher,
This email is not to inquire about purchasing one of your knives but to ask your permission, if needed, with regards to your knife sheaths. I know that you are extremely busy so I will try to make this as short as possible whilst making my question clear.
I have, within the last year, begun leather crafting and started by making a couple of sheaths for some fixed blades. I decided this because of the garbage canvas or cheap leather sheaths that come with them so I did a lot of research on the net, read blogs, tutorials, and watched video how to's all just to be able to have a well built handmade real leather sheath. After finishing two, a pocket type and a stacked leather type and showing it to some of the guys at work I have now been getting requests to replace either worn leather or canvas sheaths, with different carrying options. I have really learned a lot and when I came across your site doing a search for "custom leather sheaths" I could not believe my eyes at your designs, not just of the sheaths but of the knives as well. The lines, curves and how everything flows together even how the curves of the knife are incorporated into the sheath. Absolutely beautiful! I can only hope that eventually my work will be close to the quality of yours. Since seeing your sheath designs I really want to get more into carving, and exotic inlays, and thus bringing me to my question:
I want to make my own designs/patterns of sheaths but yours bring a lot of inspiration and if I end up with a clientele of people that ask for sheaths made for knives they already have is your permission needed to take say a retaining strap design from say your ISHI and incorporate it into a standard stacked leather sheath just for a different effect? I did tread through your Copyright page and you mostly covered your knives there. I do not make knives I don't intend to, I like working with leather, it's almost like therapy cutting out lines, choosing stamps then stamping, figuring out how to build a sheath around a knife. This is why I would like to respectfully request your permission to use your patterns to hopefully inspire designs and patterns( as far as tooling, colors curves) in my own work. I want to make it completely clear that in no way, shape, or form am I asking to copy or duplicate any of your sheaths. Again, your work is absolutely incredible I hope that one day I could be a customer of yours.
Respectfully, Philip J. Walker

My response:

Hi, Philip.
Thanks for writing and thanks for your kind words. Philip, thanks most for your service and sacrifice for the people of our country. Philip, the retention methods of the knife sheath designs are not copyrightable; they've existed in public form for decades, some for millennia. Since the actual shapes of the sheaths are distinct to each knife pattern, it is not likely your sheaths can copy mine, since you will be making designs for unique knives. However, if you would like to publicly credit me for inspiration, I would be greatly honored by that! I'd be honored if you allow me to post your email as well; the conversation of knife sheath design is an important one.
Ideas themselves are not intellectual property, so thanks for your willingness to spread the idea of fine knife sheaths around; the world of knives certainly needs it! Judging from the amount of inquiries and interest I get about sheaths, if you make a good, serviceable, practical, and high quality product, you will do well.
Thanks again, and the best of luck in all your endeavors.
Jay

Just found your website – New item on my bucket list – to one day have you create a knife for me!
Beautiful knives, website and very informative; I just spent the last couple of hours (maybe it was more like 4 hours) reading some of the most straight forward and insightful knowledge on knives. My head is spinning !
Wow and wow – thanks for all of the hard work on creating your website and one day . . . a knife of yours will be mine!

--Danny Schmider


Opened up box and was very impressed with the weight of this knife!
Great for daily carry; everything is so well-made, love the attention to details.

--S. H.


Hi Jay!
I am trying to think of a way to describe these two knife sets but words like beautiful or magnificent do not do them justice. I have read many different replies on your site from people that say the pictures do not do them justice and they are sooo right! It seems odd in a way to describe a knife as beautiful but that is exactly what they are. They are truly impressive to hold in my hand and marvel at the beauty of not only the appearance but also the exquisite workmanship you have put into these knives. I cannot  imagine how you manage to make such a seamless transition on the handle from the bolsters to the gemstone. The blades are perfect!  They are unbelievably sharp, and the mirror finish really sets them apart from all other kitchen knives.

The Concordia is really an awesome knife and this is where the pictures cannot relay the true feel and size of the  knife. The extended front bolster on it is perfect. I do not know why all knives are not made using that feature. It really adds to not only the safety in handling the knife but also the control while cutting. But, that is just me. I know a lot of people may not care for that but I would urge all looking for a knife like this to consider it.

The Sanchez is equally awesome and will be the go-to knife for the daily kitchen cutting tasks. The gemstone handle on each of these is really beautiful. The amethyst and lapis lazuli handles are truly one of a kind on knives like this.  

I have already shown both of these sets to people and the first word they all use is beautiful. It is almost deceiving that something so beautiful can be so functional as a working tool for the kitchen. I take some pride also that I know they are personalized by me for my family. They are unique and will never be duplicated!

I wish I could brag about my new knife sets to all of your clients and show them what awesome sets they are but they will have to settle for pictures. I hope they all remember that the real thing in their hand is so much better! Thank you Jay.  

You have made two great sets of chef’s kitchen knives that will used and passed down in my family for many years to come.

--J.


Concordia and Sanchez Chef's knives, obverse side view in T3 cryogenically treated 440C high chromium stainless steel blades, 304 stainless steel bolsters, Lace Amethyst gemstone handles, leather book case with top grain cover
"Concordia and Sanchez" Chef's Set

Jay,
I received the art pieces Thursday. The Khensu is a masterpiece in every respect. There is no computer that can show the true awe of the weapon. The filework is perfect, sheaths are designed to highlight the piece, and there is nothing more that can be added to them!
Thank you for letting me purchase them from you!

-P.


I just stumbled upon your website while looking at lapidary stuff. what beautiful knives! I wish I could learn from you. I'm in Pennsylvania, though. just wanted to say hello. Jim Y.

I frequently receive emails that typically cross guilds, in this case, the area of knife making and the area of lapidary. The fusion of the two has created a lot of interest over the years in both fields.

Top of Page

"Imamu" reverse side view in ATS-34 high molybdenum stainless steel blade, 304 stainless steel bolsters, green, black, pistachio G10 fiberglass epoxy composite handle, locking kydex, aluminum, stainless steel sheath with full accessories
More about this Imamu

Perfectly balanced, engraving and design layout are superb an the sheath brings it all together.
Total package.
Thank you

Best always:
P.


Hi Jay,
The knives and block arrived today after languishing in Customs for nearly a week. Must say I’m delighted with them. Exquisitely functional tools they may be but for now I’m treating them as artworks and just admiring and fondling them. Thanks again Jay, they are truly beautiful and the knife stand is the perfect complement. Well done, sir. 

--T.


Jay,
I just received my knife today and I wanted to let you know how excited I was to receive it.  The knife is so beautiful, more beautiful than I could have imagined!  It fits my hand perfectly and I will enjoy the knife for many years to come.  I truly appreciate you working with my husband to create a very special anniversary gift for me.  Thank you!

Regards,
M. B.


Too many captains may steer a boat up a mountainside.

--Korean Proverb

Upon seeing this page of the finished knife:

HI Jay!
Holy cow, the pictures alone sent shivers down my spine and and tears to my wife's eyes. ...she agrees that this was the best possible thing we could get him.

Upon receiving the knife:

The knife arrived today. What can I say? Pictures are beautiful, but holding the real thing is a whole other experience. It had just the right "heftiness" to it I wasn't fully expecting. And of course, your presentation is outstanding. The flashplate and engraved knife description are beautiful, and I know this knife will be displayed with pride and honor by Nate long after he is no longer a PJ.

I just had to send the link to the picture of the knife to my older brother, who is going to attend Nate's graduation. He is a graduate of the United States Military Academy at West Point, now retired from the Army. He is also a bit of a knife aficionado and collector. As he said in his email back to me (and I quote): "Two words for Jay Fisher -- Classy and Awesome. Nathan is going to own one hell of a knife." Bit of an understatement in my book. Wow. My brother is as anxious to see this knife as I was. Hmmm. Won't surprise me if you get an inquiry about your knives from another O.!
Your efforts to have this done in time for his graduation still leave me in awe. Can't thank you enough.

And upon is graduation from Pararescue Training:

Jay,
Here is one satisfied customer who was speechless for almost 5 minutes when we gave him the knife! What an exciting day it was. 22 of the most "top shelf" guys I have ever met. Nate LOVES the knife, and my thanks and kudos once again!

--D. O.


Hello Jay –
I cannot add to what compliments already appear on your website– therefore I am parroting……….
You have the best artist’s/craftsman’s website compared to all I have seen in my many years and your writing is superb.
I am 67, a dual citizen, and at one time posted to the 18th Airborne Corps at Ft. Bragg back in the 60’s and 70’s, so I know how pleased ANY soldier would be to carry and trust your final pieces.
Very fine, very fine.
All the best to you.

--Bryce O.
Edmonton, Alberta


Dear Mr. Fisher,
I did write to you some time ago... your site is truly amazing. I don't know how you do it.
I have just read the e-mails received section. Thank goodness my e-mail wasn't there. Very funny.
I aspire to make knives, but suffer no delusions as to my level of competency. Your work will always be an inspiration to me, and I'm sure, to many already well established knife makers.
Your web site is like an incredible reference work. Thank you for all the effort you have put into it. I hope that someday I might purchase one of your knives.
Take care, and thanks again.
G.

Top of Page


Dear Mr. Fisher,
I happened on your website today and have been enthralled with it for 4 hours now. I feel I have to write and tell you how beautiful I think your work is.
It is wonderful that you can produce such extraordinary knives. Not to mention your website, swords, sheaths, and novels too? You must never sleep! The integration of steel, minerals, and wood is fantastic. I found myself staring at some of the gemstone handles gently turning into the mirror finish of the steel. Wow!
You are a credit to this country and to artists everywhere. I have never seen such wonderful creations. Sorry to gush and I'm sure you know all this but I needed to compliment you and encourage you. Please keep your vision and continue to share these wonderful products with the world. No need to respond to this if you haven't the time.
Please, get some sleep!

With much respect and admiration,
David C.


Thank you very much! Finally a web site that newbies can access to get a good start on real, useful knives (at least what to value when researching knife purchases). Your website is in my Top 10 (5?) of useful sites, any subject. I started reading, became absorbed, then 1 minute in, CTRL+D, bookmarked the page , twice! I knew most of what I was seeing on review sites was probably marketing info and pure fan-boy hype. You give a person factual information to make sound decisions.
And your knives are impressive. Can’t afford one, maybe someday!

Respectfully,
Bob Jacobo

P.S. Please forgive my sending this email, you must  be very busy. Wanted to let you know your knowledge is appreciated, thanks for sharing it freely!


Hi Jay,
I came home yesterday, the knife was waiting for me since it arrived in Monday.
The knife and the sheath look great! The knife fits perfectly in my hand and the handle is very comfortable. The blade is sharp and looks very aggressive. The sheath looks strong and very durable. The locking mechanism is awesome! This is by far the best sheath I have ever had.
Jay, thank you for this great knife, it's definitely a knife that I can depend my life on.

--D. B.


Jay -
The package arrived this afternoon. J. is seriously blown away and is SOOOO HAPPY!
Thank you so much!!! You are awesome!
I attached a pic of him opening the box; you can totally see how happy he is by the expression on his face. He took it downstairs to the basement...He keeps going down there to look at it. Lol
Wishing you and your family a very blessed and Merry Christmas and a Happy New Year.
Thank you again!

--M. and J.


Hello sir,
My name is Joseph M. I am 24 yrs old and have always enjoyed the art of creation since I was a young boy. I've always been interested in the beauty high polished rock and minerals, metals, and even glass. But lately I've been really involved in the creation of knives, and has developed as my dream to start a knife business. I am currently taking scrap metal from an arbor shop I work at to make knives. I'd like to thank you most of all for the freedom of your work to the public and info you've provided on your website for all the knife hounds out there. you've been a great inspiration to the beginning of my new legacy in knife making. So to get to what I've been waiting ask you is, as a beginner in knife making, I was hoping you could spare me any of your knowledge as to how I could get started cheap. At the moment all I have is a 4 1/2" right angle grinder and a 16" bench grinder. What do I need? I'd also really appreciate it if you could send me your brochure.
--your distant student
Joseph

My response:

Hello, Joseph.
Thanks for your kind words about my work, and welcome to knife making. The first thing I’d suggest is to invest in some good books on knife making, and there are several good texts out there. That way, you’ll get a clear idea of what it takes, and you can develop a budget for tools. The tools, knowledge, and time are the most important things. I started out making knives with just a hand grinder and sandpaper, but it became clear that in order to produce finer works, a belt grinder was a requirement. If I had to start all over, the belt grinder would be my first consideration and investment.
Good luck!
Jay

Top of Page

Jay,
I just stumbled across your website and was blown away. I have been in leather supply for over 30 years and have seen an incredible amount of great leatherwork and many talented people. Your knife sheaths are the most beautiful I've ever seen. It is not just the quality of the leatherwork but the incorporation of the art that is stunning. I especially like the way you make the knife and the sheath work as a unit in pieces like the Dorado, Raptor, and Izanami sheaths. Most people see a custom sheath as one just made to fit a particular knife. In your case it is not only the fit of the knife but matching the colors and lines of the knife to create an aesthetic that I've never seen in a sheath before.
Your love and dedication to all the art and craft that goes into your work is apparent. Congratulations for your level of accomplishment.

Best regards,
Dennis G.


Hello Jay,
...I only e-mail to say thank you for your straight forward, understandable language used to clarify all your personal ideas, visions and aspects around Knife-creating.
I found and visited your website by pure chance, in the exact right place and time whilst finishing my own process in fine-tuning my visions, loose ends and fascinations as a visual-artist. Your clear voiced experience, and insight was helpful in a more universal way than merely the building of quality Knives. Maybe I could relate to the subject, because I have a fascination for Knives since my youth, and I believe I can grasp the mystical aspect of the Knife.
Anywho...  The devil is in the details, so Thanks again.
May your knife business flourish like all other D.I.Y. quality knife businesses, and all other businesses for that matter.
Cheers,

DLMS


An email that was flagged of "High Importance" and titled "I hope I have been helpful."

Dear Jay,
There is an error you will want to correct on your tactical knife.
"Argiope" Fine Combat, Tactical Knife
Size: Knife: Length overall: 13.0" (33.0 cm), Blade Length: 8.25" (20.9 cm), Thickness: .243" (6.2 mm)
Weight: Knife: 16.0 oz. Sheath: 11 oz.
Blade:O-1 Tungsten-Vanadium Alloy Steel, Hardened and Tempered to Rockwell C59, mirror finished, hot blued

My Timken Practical Data for Metallurgists has the following composition of O1 tool steel.
C (Carbon) .94%, Si (Silicon) .30% , Mn (Manganese)1.20%, W (tungsten) .50%, Cr (Cromium) .50%
It does not contain Vanadium according to this analysis.
Very Truly Yours,
W.C.

My response:

W., not all tool steels by all manufacturers are the same. The O-1 I use has .2% vanadium. There are 8 (EIGHT) types of Oil hardening tool steels recognized by AISI. The type I use is generally classified as a “Low Manganese” oil hardening tungsten-vanadium tool steel, but specifically classified by the manufacturer as “Tungsten-Vanadium Tool Steel.” Some of the various types of Oil hardening tool steels do not even contain tungsten!
My O-1:
Nominal Analysis (AISI 01)
Carbon.................. .90
Chromium............. .50
Manganese........... 1.20
Tungsten.............. .50
Vanadium............. .20
I hope this clears it up for you. While I won’t go into these details on my site or through emails, I am putting them in my upcoming book.
Thanks,
Jay

Top of Page

Upon hearing about being named as the best living knife maker in 2007 Best of the West:

Hello Jay,
I am glad to hear about the new honor, Jay. I agree with them. I have used the Muleshoe for some time now and it still looks and cuts as if it were brand new. Congratulations! I don't need to tell you to keep up the good work. I know that you will.

--J. L.


Jay,
I just spent the last hour looking at your website. I was drooling the whole time.
I am a 59 year old retired tool and die maker with 40 years experience. I have worked with CNC milling centers, CNC sink EDM, & CMM. Done programing on all of the above plus worked on the actual machining processes with these tools. I did complete an apprenticeship in tool and die making when I was a young man. I am also a certified professional photographer. I ran a wedding and portrait business for 12 years while I worked at GM as a tool and die maker.
Do you need an apprentice in your knife shop?
Great looking shop.

Sincerely,
Mike Cunning
Ajax, ON


Whoever plays with cats must not fear their claws.

--Egypt

Jay,
I received the knife. It is amazing and a valued addition to my collection. It joins knives made by both some of the most famous makers (Moran, Loveless, D'Holder, Dean, Hendrickson, Warenski, Schmidt, Kessler, Morseth, etc.) and many up and comers I believe in.
I really believe your are a great knife maker on the rise!
Thanks again, and please keep me posted on anything else you make that comes available.
Best,

--L. B.


Jay,
My thanks to you as well for taking the time from your busy schedule to visit with us, and for the inspired creation, extraordinary craftsmanship, and delivery of the Aegir - it is a truly wonderful and unique work that I shall enjoy for the rest of my days, and is now comfortably ensconced in my living room where I can view it every day from the comfort of my favorite chair.

--G. L.


Extraordinary take on the weapon. Perfect!
I see no reason the weapon can not be used for combat by a trained soldier.

--P.


Hello,
I'm looking for a very strong gravity knife, and or stiletto type. I had one years ago and it broke from pretending it was a throwing knife. It saved me once from being mugged, and being im working late nite shifts again well. Any ideas cost material etc. would be appreciated. I'd prefer your strongest blade and handle combination coupled with lightweight strength.
R.L.

My response:

I do make fine folding knives, some unusual sliding blades, and other proprietary mechanism knives. There are several points to consider.

The term "strong" referring to a folder is tenuous at best. No matter how a folder is made, it has that inherent weak point: the pivot. Many attempts throughout history have been made to strengthen that focal point, yet no one can get around the fact that the most stressed part of the entire knife (the junction of the blade and handle) is exactly where we put that little axle to rotate it. Just look at fixed blade knives. They have heavy bolsters right where that pivot is...

It's easy to see now why so many of my military clients have insisted on full tang knives. Some even require the strength to "shove it in a rock and stand on it for an hour or two if needed."

If you are set on a folder though, I do make them. They usually come with close tolerance polished and hardened stainless steel bushings, replaceable springs, adjustable spring and lock tension. They break completely down for maintenance/cleaning with SS machine screws. They start at about $650. I don't know what your budget is for this knife, but I have over 160 different styles. Fixed blades start at $250, and quite a few of these are in the hands of military, law enforcement, and civilians who trust their lives to them.
Jay

Top of Page

Jay,
I received Gemini today. It's incredibly beautiful! The pictures didn't do it justice at all. The file work is impeccable, the style of the blade is perfectly curved, and the Siberian jade handle is shockingly green. The knife seems to have been made for my hand. I am pleased I made the decision to buy it. It will become an heirloom to be passed down for generations. Thanks for all your fine work.
Most sincerely,

---J.H.A.


Jay,
This blade has a story it depicts, I will need more time for a proper response...
All my prayers,

--D. S.

P.S. It is far-more than expected... but a creation from the caliber of a person I see you to be...  "Intense" might do for now...


Hi,
I just wanted to take a moment to thank you for sharing your vast knowledge with the world at large, and providing people like me so much insight into knife-making and metallurgy for free.  Even for someone like me who may never be able to afford one of your masterworks, the knowledge you've shared has already made me a wiser consumer where knives (and possibly tools in general) are concerned...Thanks again for all the knowledge and inspiration. If I ever do strike it rich, or end up spending most of my time outdoors, I'll be sure to add even further to your list of back-orders.

Much Respect,
  D. G.


Hi Jay,
I got the Lacerta today!
Like I said, I've been following you for over ten years. I saw many of your photos and I enjoyed a lot looking at them. But these are no comparable to truly hold one of your fine knives at hand.
This is the first time I order knife from you. Lacerta is the nicest knife that I have ever held. It allows me to really appreciate your incredible craftsmanship.
Thanks a lot! It is my privilege and honor to own this knife.
You'll hear from me soon.

Best,
W.


Dear Jay,
Just a quick note to let you know that the Gemini arrived yesterday in excellent condition. Sufficed to say, it certainly exceeded all of my expectations in terms of design, aesthetics, workmanship, fit, and finish, and I am completely delighted with it.
My thanks to you again for another wonderful knife to add to my small collection.
(By the way, the packaging you employed was exceptional - I truly believe that FedEx could have played soccer with that package without inflicting any damage whatsoever to the contents.)

--G.


Hi Jay,
You don't know me but I just wanted to say THANK YOU for the wealth of knowledge about knives and all things related (and some things unrelated, too) that you share freely on your website! A lot of people may not agree with all your opinions, but I think it's great how much you are willing to share about what you've learned over so many decades of practical knifemaking experience. Your website is a very valuable resource. As a hobbyist, I often look up your info about handle materials.

- Mark Ou


Jay,
I received the knife today. I am even more impressed being able to hold it in person. The pictures are good but just don’t do it justice. What a work of art and function. It feels great and looks even better! I am just impressed with your craftsmanship. Thank you again!

Blessings,
M. Secora


Just one more question if you don't mind answering being that I am 19 years old, I am in search of a career but something that I am interested in and well I Love Knives! can never ever get enough of them! Well my question is this, as a custom knife maker Jay, Is knife making a rewarding career and if so how would I go about pursuing it? thank you for your time.
Joe

My response:

Hi, Joe.
What I often suggest is that young people try as many things as they can find that interest them, and one will survive, not because it’s productive, but because it satisfies an internal interest and keeps going within you. This is what I did; you can see it in my bio on my site. For me, knife making fit well, but I only knew that for sure after years of making. Other interests will always be with you, but some will stand out. Try every one that comes along, and remember that an education in any field will help you in a chosen one. For knife making in particular, there is no specific, accredited course or study format. It is actually a fairly rare tradecraft. The only one that may come close is jeweler or metals arts, which are both taught in universities.
Thanks,
Jay

Top of Page

Jay, this is fantastic. Many thanks. You did an amazing job. I had in mind only two colors to suggest the idea of a wasp, but with your mosaic design you captured the real beast. I also like the "devastatingly sharp point," which adds meaning to the wasp theme. Plus the scabbard in rosewood, which could not be any better. I am very glad you approved of our cooperation, even though you did all the work and improved on my suggestion.

I suppose any collector shares his best treasures with other enthusiasts and I look forward to bringing the wasp out when my friend brags about his latest acquisition. 

With best regards,
H.


"Vespula" Fine Custom Knife, obverse side view  in T3 cryogenically treated 440C high chromum martensitic stainless steel blade, 304 austenitic stainless steel bolsters, handle of Black Onyx, Tiger Jasper Gemstones, sheath of Cocobolo Rosewood, African Padauk hardwood
More about this "Vespula"

I have to confess I was so smitten by your site's Nebula stone Ladron picture that I had to show it to someone who would appreciate its beauty. I e-mailed it to Ron and Karen with a note that I think of you as Vulcan in his smithy creating art objects for the ancient gods, but with a few slipping away to us lesser mortals. They in-turn think of you as a genius in your medium.

Short version, I absolutely love the beauty, feel, grip, balance, edge, carving..., of the Nebula Ladron. The sheath for the knife is drop-dead gorgeous . You are truly today's genius in creating knives for aesthetically pleasing beauty or for combat.

Believe me, as a patron, I am grateful to own my Jay Fisher Collection at these prices!

Best regards,
D.T.


Mr. Fisher,
I simply must say thank you! Thank you for sharing. I am waiting for your book. Sometimes I feel as though the fire of fine handmade craft is burning out, your site has changed my attitude on that. I am enjoying the art and technical prowess demanded by knife making.
Fine furniture making will always be my first love.
I'm not fishing for questions to be answered, your writings have everything anyone could ever ask for. However, should you ever need a fine-furniture making question answered please feel free to ask.
Cheers, and best wishes for 2018!

Aaron
aaronradelow.com


Hello Jay,
I recently got into knife making as a hobby. I came across your website and I just have to say you make some of the most Beautiful and Functional knives I have ever seen. It is wonderful to see such things as inspiration to always strive for better quality.

That's pretty much all I have to say, but I felt I had to let you know how amazing I think your work is.

 

Sincerely,
Sean Mckernan


Jay,
I am an amateur garage knife maker. I have a simple shop, with a drill press, grinders, belt sanders, saws, propane and map torches, etc.
I have only made a few knives, and I have learned that you have to practice, practice, practice. I am amazed out how much steel I can go through to get what I want. The good part is the ones I have made for friends have been well received, as was one when an older friend gave me a knife he had made when he was young (was a wedding gift to me). I have been sitting at the computer reading your site for about 4 hours now. I want to thank you for the enormous amount of information, ideas, encouragement, and education that your site provides. Well, back to more reading. Bye the way, don’t change a thing to your site.
Thank you for your craftsmanship and your art,
Richard W.

I receive this type of email frequently, and I appreciate it. When I started making knives, there was no internet, no source of knowledge or information about this business and art apart from the few publications available, and some magazines that offered limited articles. Nowadays, the internet poses another set of problems, and that is misinformation and information overload. That is one of the reasons I've made the site so comprehensive; to offer a service based on my experience not only to my clients, but also to my tradecraft and industry.

Top of Page

Any serious knife combatant or collector who hasn't experienced Jay's quality really doesn't know how good a knife can be. It's beyond precision, the finest materials, or even art. Jay has a quality that is unique in the world: a sense for perfection in application, as well as beauty. When you feel the balance, you'll never want to go back to any other, but when you see the look, you'll want to put it in a jewel case! What a great conundrum.

--Tom and Joe, your www.BladeCombat.com team.


Thanks Jay. We all really appreciated that you took time out of your day, as busy as you are, to let us come by and check everything out. It was very impressive to see all the work, skill and care that goes into the knives you produce. I also wanted to express thanks for being so supportive toward what were trying to do, and more so, the military in general. We all thought that was really nice. I'm really excited about this knife, just the plastic cut out today was neat, I cant wait to see the finished product.
Once again thanks,
N.F.,
USAF Pararescue

Top of Page

Hi Jay.
I just received the knife. It is single-handedly the most beautiful piece of art that I own. I am so grateful for your work. The sarcophagus, the sheath, and the knife are all independently beautiful pieces.
Once again I cannot thank you enough.

--D. F.


Hello!
I came to your website accidentally, and I was AMAZED! You truly are an Artist, your knives are peaces of art, they are magnificent !!!
I hope soon, I'll be able to afford one of them.
Your family is lovely.
Keep on good work.
All the best from Croatia.
Mario P.

Top of Page

Hi Jay!
Postman just arrived ;)
My comments before were exactly right, this is a beautiful knife! Thank you for job very well done, hopefully we do business again.

--K.N.


Hi Jay,
I wanted to let you know the Mule knife was delivered today. The packaging was top notch and made me feel like I was about to open something very special. This knife and sheath are absolutely a work of art. The knife looks stunning and your web pics come pretty close to presenting what the knife actually looks like in person. The bronzite gemstone is beautiful and has cavities of gold material that give it a three dimensional look. Very cool. The knife itself feels hefty and perfectly balanced in the hand and gives you the impression that when cutting with the blade will be smooth and effortless. I really like your choice of file work. It is simple yet has a tribal look to it if I am not mistaken. Awesome!  The sheath is just amazing and I love the solid beefy feel it has. The combination of colors and material used makes this sheath and knife look so good together.  Even the stitching matches the gold in the handle of the knife. This sheath looks so good front and back you can't decide on which side to rest it on. Sweet. 
I am totally thrilled with my first Jay Fisher knife and sheath. Thank you for passing this masterpiece on to me, I will take good care of it.  I know now I am truly in knife heaven!
Best Regards,

--J.


Hi Jay,
This isn’t a serious knife purchase inquiry because your knives are out of my league pricewise at the moment. But I wanted to send you a little knife “love” letter to offset your hate mail!
The photo of this knife set took my breath away and literally brought tears to my eyes. I hope, one day, I will be back to buy a set just like it.
I can not believe anyone could dream up the works of art that you create. Your imagination is boundless. You are a true craftsman.
Thank you for making art and sharing it with the world.
Without art, we’d be senseless.
All the best --
Hilary

Thank you, Hilary; your email makes this all worthwhile!


Jay, the knife came in yesterday after I had left for the day and was waiting for me this morning. It is beautiful to the eye and to the touch and much lighter than I expected. The gemstone is riveting in appearance and the mirror finish is my favorite. I don’t know how many other inquiries you’ve had but I am certainly glad that I acted quickly. Great work as usual as well as perfect service.
Merry Christmas.

--D.


Jay - it looks amazing.  Thanks!
Can't wait to have the knife in hand.  My wife and i both keep going through the pictures over and over.  It is really stunning.

Jay - just wanted to let you know that I do have the knife in hand and it is absolutely stunning.  I think I need to get back in the queue for another one or two in the future.

Best regards, J. W.


Hi,
I can't afford one of your knives but having dabbled at making a couple for myself I just wanted to say how in awe of your work I am....your knives are WORKS of ART!!! I can only aspire sir!

Kind regards,
Gareth Mackenzie

Hi Jay From South Australia

THANK YOU! Your website is a rare treasure. I have learnt more in one evening from your website in one than a month of scouring the web on blade technology.

I am and have been a part-time hobby jeweler for years who had aspirations of making a knife for myself as a display of my "talents". That is the problem with finding the best out there. It can make you feel like an infant who has just shat in his nappies! I'm confident in my design skills as a jeweler but when it comes to blades I am a noob and WAY out of my league. 

I'm going to use your site as a study reference as this art is something I am determined to learn. Was trying to find someone to do a blade on commission to fit my handle but was not satisfied with what is available to me here. When reading the manufacturers (Damasteel, Sandvik, Crucible) instructions on hardening and tempering their premium martensite alloys many recommend cryo treatment for optimum tempering but have yet to find one commercial small volume heat treater here in Australia who does it. When I queried this they (the heat treating firms I made inquiries with) dismissed it as not important! HUH? So I dismissed them! Mediocrity is not inspiring. AT ALL!

That made me both frustrated and angry and also determined to find an answer. Then I come across your website and literally in one evening a lifetime of myth and bullshit on blade craft was wiped from my mind. Ahhhhhh! It was a cleansing experience I assure you!

I have a LONG journey ahead of me. Absorbing everything on your website is but the first step. THANK YOU for your honesty, your professional attitude and the dedication to your craft that inspired you to give so much. It is very and mandatory reading at a time in history when but a precious few in their given art. I wish you all the best and I am sure that better is yet to come.

Kindest regards,
Mark Gessner


As I spend more and more time in the water and trying to hack my way out ouf the mess my dog gets me into I find I need a simple knife. My Ernie Emerson (no not Bench made) is great for a pocket knife. My Randy Martin is a spectacular neck knife but I need something affordable that can clear rigging, fishing line and nets on my rescue dives. I need a working knife that will take a licking and keep on ticking. I also can use a auto knife as MicroTech’s Chameleons are dangerous (to my hands and my BDU’’s and the HALO’’s just don’t hold up. The commercial dive knives just don’t cut the mustard. Simplicity pleas with maybe "That other’s may live" will do.
Thanks,
D.W.

My response:

It sounds like you've covered all your bases, and you're looking for your number one tool. If you've perused my site, you've seen that I make quite a few, in quite a range for serious users as well as collectors.
Two particular models come to mind. I make an Instructor's knife for the USAF Pararescue School in ABQ. It is based on the PJLT frame: a clean, simple, no frills model with a tough ATS-34 bead-blasted blade, nickel-silver -or- 304 stainless steel bolsters, linen reinforced micarta handle, in a kydex and aluminum sheath. These models start at $250 for the N-S fittings, and go up from there. I can email you a nice jpeg picture of this knife, if you'd like.
If you are interested in the -ULTIMATE- dive-rescue knife, the full sized Pararescue is the ticket. This is one of the finest, toughest knives I make, and the feedback from military users is excellent. It is a heavy, tough, thoroughly waterproof model of 440C, 304 stainless bolsters, no filework to hold salt or debris, no milling under the full tang that could possibly trap water. It comes in a positive-locking sheath made of Kydex, Aluminum, and stainless steel. It is on the "Current Knives for Sale" page of my web site, look for the Ivory micarta handle.
Now, if you don't see what you like available, or if you have a specific budget in mind, I'll work with you. You might require aggressive rip teeth, a skeletonized handle, or special fitting requirements. I can customize, etch your name/unit logo/military flash permanently on the blade. I guarantee my workmanship for my lifetime. Who could ask for more?
Jay

Top of Page

Hey Jay,
I love the gracefully curved lines of the blade, handle, filework, and engravings of this knife. But the sharp edge and point leave no doubt its intended purpose. Truly the Yin and Yang. Smooth and graceful, yet sharp and bold, all in balance. Jay, you did good!

--J.


Jay,
All I can say is WOW! I think I have worn out the keys on my keyboard going through the photos again and again. Cannot wait to see it in person to appreciate the multidimensional aspects. Please send it as soon as you can.

Upon receipt:

Everything made it safe and sound; no problems with assembling it. These two knives really do belong together and I am glad it worked out that way. Again, thank you for allowing me to acquire this artistic piece from you.
Thank you Jay, you are very much appreciated.

--J.


Treat your guest as a guest for two days; on the third day, give him a hoe.

--Swahili proverb

Hi Jay-
The chef's set arrived yesterday and they are absolutely wonderful! Each one has a perfect feel in my hand. With the Chef's knife it has a great amount of heft relative to any other knife I have used, yet its balance and sharpness allow me to work quickly on the board. The bread knife zipped right through a rustic Italian loaf, even allowing for thin slices. And the paring knife is perfect with small items on the board or off. I'm excited to use them more - they will be a highlight of my kitchen forever!
Your craftsmanship is amazing. The petrified palm wood was an excellent choice for the handles, and the polish on the blades and fittings adds to their beauty. I also love the case - super detailing of the wood and even the hand-made hinges!!
Thanks for creating a perfect set for me!!!

-Michael


Mr. Fisher,
I am a new knife maker but my family and I have been metal crafters for generations. I do customer order knives as your definition states. I also do ready made, for sale, one-off knife designs. Not custom but no exact copies.
I use 1095, Damascus 1095 15N20, and 440C almost exclusively. I want to thank you for the clear description you have given on the use of custom named products. It is very gratifying to build a knife for a client after you have sat with them and designed the knife to their needs. This is a hobby for me now as I hone my skills and acquire more equipment. One day I hope to be as good as you in presentation however I believe my quality is high even though my finishing skills are developing.
Thank you for posting so much great information. I will continue to search your site and others who share your views to refine my craft.
...Please feel free to publish my comments and name. I believe you are one of the premier knife builders of our times and look for more great information from your site.

Kindest Regards,
Bill Anderson


"Desert Wind"  Persian Dagger, Obverse side view: 440C high chromium stainless steel blade, hand-engraved 304 stainless steel bolsters, Mossy Nephrite Jade gemstone  handle, stainless steel engraved sheath, Wenge, Cocobolo, Purpleheart hardwood, with custom display stand
More about this Desert Wind

Jay,
Thank you for the fantastic pair of knives. They look great.

--T. B.


"Titans" matched karambits in 440C high chromium stainles steel blades, T3 advanced cryogenic treatment, mirror polished, hollow ground, hand-engraved 304 stainless steel bolsters, Stone Canyon Jasper gemstone handles, sheaths of black rayskin inlaid in hand-carved leather shoulder
More about these "Titans"

I have a buddy of mine he will be going to Iraq, I would like to buy him one of you knife's to take with him as a show of friendship and support with my company logo engraved in it but I can only afford $1,000 to spend and I like your sheath. thank you for you weapons and time. L.

My response:

Hi, L. Thanks for writing. Please thank your buddy for his service to our country.
The budget is no problem, but right now, new orders are taking 24 – 30 months, due to large amount of orders. Occasionally, I have a knife come up on my “knives for sale” page, and they’re snatched up pretty quickly, but keep an eye on the web site.
Let me know about the time frame,
Thanks,
Jay

This is always tough for me. I do wish I could make the knives faster, offer more available to clients who have a more immediate need at a sooner time. Unfortunately, I can't recommend other sources, as there are so few out there that are really offering a high quality combat tactical knife.

Top of Page

Hi Jay,
I did receive the knife and have been so busy showing it off to many of my friends that I neglected to send you an e-mail. I love the knife and agate handle. As always, you have created something I will cherish. You are the greatest.

--G.


Jay,
Hello; first, I love the knife. I got home from pre-deployment leave on the 25th and the knife was the first thing I opened. It was amazing, just like I wanted it to be. Then I packed up and left for Afghanistan on the 27th. I have used it for many jobs and I love the way it feels and cuts. I just hope I can keep it as sharp as when I got it. After that day long ago when I left your shop, I set to learning how to sharpen knives, so that when I needed to sharpen one of the knives you made, I would do so without messing it up. I now have many types of stones and spent many hour on YouTube, read the book Razor Edge Sharpening, and spent many hours with old knives, so now I think I have it down.
The kit (accessories) that you sent has been great. I have carried the knife two different ways: either with the kit inside the E & E bag that goes on all my ops, or without the kit and on my person.
Take care,

--G.


Good afternoon, Jay. Just wanted to drop a quick note, and thank you for putting up an awesome, and informative site. I am an aspiring knife maker, and all the photos, and information have been inspiring. Thanks again for the great site, and keep up the amazing work.
Phil
Thank You,
P.C.

My response:

Hi, Phil.
Thanks a lot; I look forward to seeing some of your knives one day!
Jay

Top of Page

Jay,
The knife arrived today safe and sound. It is far more amazing in person than I could have imagined. My challenge now is to actually deploy such a work of art in the field (the first scuffs will be the hardest, after that it should get easier). I have never owned anything like this, thank you. I know it will be a great companion for many, many years.
Thank you again for all your help and patience with my questions.
Cheers,

--E.C.


Jay,
I received the knives you crafted a day ago. Both are exceptional in fit, finish, balance, and design. I couldn't be more pleased with the work. Thanks very much for creating such beautiful examples of the knifemaker's art for me. The cross draw sheath is exactly what I wanted for the Alegre, and a great match for the knife.
I'm very much looking forward to the future projects as I'm sure they will turn out even more memorable than those you already create for me. Thanks again for your superb work and craftsmanship!

--H.


Hi Jay,
Your knife safely arrived about 2:00 PM today, It found a new home in my Kitchen, YEA. Thank you, I fell so blessed to have one of your works of art.

--P. S.


Forum post by Jay. This was a response to complaints that big time knife makers and blade masters do not generally post on bulletin boards or forums on the internet.

Hello.
In response to your posting on May 11, I'm one of those "blade masters" who used to post on (Name withheld) Forums for a while and don't anymore. Yes, I'm very successful, and extremely busy, but still take a few minutes every now and then to browse the forums.
I don't post because there are too many guys asking ridiculous questions and a lot of misinformation floating around. It's a waste of time to answer questions and argue with ignorance, no matter your dedication to the trade.
I am a professional, having supported myself completely with my knives and weapons for many years. The word "professional" is extremely important, my international clients and military depend on that attitude and perspective. Unfortunately, this is lacking in most of the commentary.
I understand how knife making starts: from an interest, to a hobby, to a craft, and ultimately art, but most makers are stuck in the first two categories. Numerous attempts have been made over the years to "Professionalize" our trade, but have failed in the light of bloated egos, flippant attitudes, and outright greed. I'd love to discuss some of THOSE stories...
I want you to know we are out here, blending science with art, on the cutting edge of technology and business, and available for any conversation you wish to initiate.
Jay

Interestingly, they were not interested in my comments. Who wants to hear from someone who really is a professional anyway? Professional makers don't understand or relate with hobbyists or beginners because we have our heads in the clouds, not the reality of knife making... right?

Top of Page

Hi Jay,
The Altair is absolutely stunning! Well worth the wait. It fits my hand perfectly and is certainly a one of a kind, or only one of a very few. It will be a very nice addition to my collection. Thanks again for your craftsmanship and dedication to your art. The sheath is also very well made, sturdy and good looking. You are a true professional and one of the best in your field!

--J.


I got the knife today. Thank you soooo much! It's perfect. Can't wait to show it around.
Thanks again.

--M.


Mr Fisher,
I've recently began collecting medieval swords knives daggers, etc. Til now I was pleased , but I noticed my pieces lacked quality, being from a renaissance festival or what have you. Specifically I'm interested in a gravity knife with an English or Scottish feel to it. One that attaches to the fore arm. Glancing over the work I've seen of you, quality is something you take seriously. Unfortunately, e-mails aren't something I check daily but I will at some point reply or you could call my MI. based cell phone at (deleted). My name is Jeremy. Thank you for your time

My response:

Hi, Jeremy; thanks for writing.
I’m sorry, it is against the law in our state for me to make gravity knives, butterfly knives, or automatic opening knives.
Good luck on your search.
Thanks,
Jay

His response:

My apologies Mr. Fisher. If I knew it was illegal I would not have asked you your services. In the future I'll research what I try and add to my collection. All the same, at some point I would like to have your work in my collection. Thank you for your reply

This question comes up from time to time, and the laws governing manufacture (or making) of knives vary from state to state. Please check your local laws regarding not only making of the knife, but also carrying or shipping of the knife to your location.

Top of Page

Aloha, Jay:
I just want to thank you for writing an excellent treatise on knives. I mostly deal with Nihonto (Japanese swords) these days, but still have a great Damascus knife collection. I'll be looking into buying one from you sometime soon.
Mahalo! (Thanks!)

Ken
Ken Goldstein, Ph.D., P.E.
President, Japanese Sword Society of Hawaii
Kaneohe, Hawaii


Jay!
The weapon arrived this afternoon as I was about to go to work. It is the most fear inspiring knife I have ever seen, a beautiful addition to my collection. Thank you for giving me the opportunity to buy this knife.
Yours truly:

P.


Awesome!
Jay I made time to look extremely close at all the pictures and I am without words to describe how I feel. You have created numerous masterpieces for me over the years and to claim one is THE BEST would slight the other ones. The rescue knives are artistic and brutal, hunting and fillet knives are practical and beautiful, Titan and other self defense knives are art works in sheaths and my retirement display is second to none. All I can say is it is awesome and it is an art work that will be passed down for generations.
Thank you for creating it!

Upon arrival:

It just arrived and I am completely satisfied. My hands would would be destroyed if I had attempted that engraving.
I look forward to the Trailhead and the Lynx I ordered several years ago, I know these will also be masterpieces. When my number comes up I would like to talk to you about the thickness of the blades, the Arctica needs some companions!
Best always:

--P.


I freaking love you man, I don't know if you're even alive given that your website looks ancient, but I came across your Knife Grip page while I was doing some research for a fight scene I'm writing out, and your educational pictures made things so much easier to understand than what I found on Wikipedia. I don't really want to buy a knife, but thank you for the educational images.

--Adam


Hello Jay,
My name is Nick R., and I'm writing you to give some appreciation. I don't expect a reply, as I'm not yet a vying customer (though one day I might be) but I'd like to drop you this email anyway.
I'm a student in Texas who has always had an interest in knives and tools; they've always fascinated me and I wished we had more places for their use in our daily lives. Which I suppose is to say that I wish MY daily life had more opportunities for them. I Used to adore camping as a kid when my parents took us out, it's always thrilled me to live out in the rough wild, though sadly we never lived OFF the land. In the last 5 years or more I've developed an increasing interest in the outdoors and recreational 'outdoorsmanship' or 'bushcraft,' and just recently while studying ancient humans and our descendants I've found that I am incredibly interested in lithics- stone tools.
All that being said, the point of this email though is to tell you that you have got an amazing set of skills Jay. I've spent the better part of a week pouring over each page and all that you have to offer in the ways of thoughtful explanation. I've looked up knives before, and used to collect decorational swords, but I have to say there is nothing like seeing a custom, real knife. Something that serves a purpose, not just a decorational piece of metal. You're work has given me a lot of inspiration, I can even say that I've let it overshadow keeping up with my current courses and readings! hahaha. You do some fantastic work Jay, and I've got this little group of personal Heroes. The little niche I'm speaking of currently houses Ray Mears and Les Stroud and of course the ideas I've seen from other cultures and the means and methods they use to live in the world they do. Now after reviewing your materials, photos, writings, and customer testimonies you now stand with Les and Ray as my outdoor heroes.
Thank you Jay, for your inspiring craftsman ship and beautiful works of function and art. I hope to one day purchase a few knives from you, along with having a specialty all-around utility knife made for my future outdoor escapades. Take care, and all the best for your work and family.
May you have pleasant days and long nights,
Nick

My response:

Hi, Nick.
Thanks for writing, and thanks for your kind words about my work. It would be an honor to make you a knife (or two) in the future, so study hard and be successful!
Thanks again,
Jay

Top of Page

Jay,
Thanks for devoting yourself to your art. You create function, beauty and style, all in a way only you can provide. Many thanks and blessings.

--J. W.


I received it Sat. It is a magnificent piece of workmanship. The engraving on the blade is fantastic. The creative talons of ivory are a unique touch. The stonework is such as I have never seen. Very original. Thanks so much. It is sharp too! It must be very gratifying to be able to make a living from a craft you love..Thinking about another idea for a working knife…I’ll let you know.

--B. M.


"Cygnus-Horrocks" custom handmade knife in 440C high chromium stainless steel blade, 304 stainless steel bolsters, Australian Tiger Iron gemstone handle, Ostrich leg skin inlaid in hand-carved leather shoulder
More about this Cygnus-Horrocks

Titled: Knife Heat Treating Article

"Nice article. A college course in itself.
I have learned more about knives from your web site than anywhere else.
Those TV shows like 'Forged in Fire' are somewhat amusing now."

--R. S.


Hi Jay,
Just received the knives. They are amazing. Beauty in form and function. The leather case is phenomenal and perfect for transporting these knives to wherever I may go. These truly are an heirloom that will be handed down for generations to come within my family. Thank you for the mastery of the work that you’ve performed in creating these knives and leather carrying case.

--M.


Mr. Fisher,
Good Morning Sir!
I fully understand that I will not receive a response to this email, however I wanted to thank you for sharing so much expertise, experience and professional knowledge on your website. It's truly a breath of fresh air to read some no-nonsense facts about today's knives. The need to run to the newest "whizz-bang ultra premium vapor-deposition" steels these days are almost humorous.

I, too, am a knife maker, although not to your caliber. These days I really only focus on offering various exotic wood handles for knives, and occasion grips for pistols. I always stuck with the tried and true for steels though - 440c, O1, ATS-34 (or RWL-34), 52100, etc.

I only wanted to give you a praise, and thank you for giving a realistic approach in knife making. Keep up the good work Sir!

Most Respectfully Sent,
Kevin S.
USMC (RET.)


["signature" graphic included with this email submission]

I was just wondering what it would cost for a dagger and a stand for it that was completely custom? I don't know much about daggers, but am looking at getting one for symbolic purposes. If I presented an artisit design, could you do it? Is your skill level able to pull off something from paper?
Thanks in advance,

Great website and very informative. I would consider a resign though for display. The average person wouldn't have strained so much to find what they are looking for on the site. The content is good.
--S.C.

My response:

Hello, S. Thanks for writing.
The price of an art dagger completely depends on the components of the dagger. Also, the finish must be considered, and embellishment, tooling, stand, case, or sheath. There are a lot of options when one chooses a complete custom knife. I can and do work with clients’ designs, but because this entails a lot of drawing, tuning, consideration for geometry, steel types, and general design work, it still requires the design deposit. You can read about the details of the design fee here.

Thank you for your comments about my site. The site is complex; it’s a very complex field of artistry that I’m in. I’m not worried about the average person finding their way through my site, my site is geared toward knife aficionados and professionals, and they are very happy with the content and layout. Ah, if this field were only simple enough to have a simple site, with a couple pictures, and about three prices for knives… (smile)

May I be so bold as to offer you some advice, in kind? When you include your graphic with your email, nearly every firewall and modern email program stops your email cold, because of the possibility of the graphic containing malicious code. I had to retrieve your email from beyond my firewall. I almost deleted it… just a head’s up.
Thanks for your interest, and I’d love to see your design.
Jay Fisher

Top of Page

WoW what a knife. The balance is perfect. The grip for my 7.5 sized glove hand is perfect. Looking at the dovetailed stones-- there are no gaps whatsoever. Especially pleasing is the middle section of stone pointed on the palmar side of the grip at the apex of the curve. Never before did I appreciate how filework is nothing unless bordered by the bolsters and the stone. It is really set off with a border. The colors make you look the handle up and down in a sweeping way so as to appreciate the unit as an organic whole. I examined the knife under 3.5X mag. Especially the filework. I note that alternating flowers of 1 and 3 file strokes on opposite sides of the tang have slight variances which point to true hand work...not machine CNC. This especially is true with the 3 stroke cuts. Sometimes they are a perfect “W” and others have a slight outward tilt/curve to the upper right stroke of the “W” When I hold the knife I am transmitted to a different time when a Feudal Lord or Pioneer of means could commission such a work of practical art from a craftsman such as yourself...WOW.

--B. M.


Jay,
You a are for sure the best knife maker in the world.
I am very excited to be the owner of a Jay Fisher knife. 
Thank you very much for the extra sheath and for everything.
I wish you all the best Jay!!!

--D. C.


Mr Fisher,
I've recently began collecting medieval swords knives daggers, etc. Til now I was pleased , but I noticed my pieces lacked quality, being from a renaissance festival or what have you. Specifically I'm interested in a gravity knife with an English or Scottish feel to it. One that attaches to the fore arm.
Glancing over the work I've seen of you, quality is something you take seriously. Thank you for your time
J.

My response:

Hi, J.; thanks for writing.
I’m sorry, it is against the law in our state for me to make gravity knives, butterfly knives, or automatic opening knives.
Good luck on your search.
Thanks,
Jay

Top of Page

Hey, Jay!
Even my wife was awed! "Wow..." was what came out in a whisper! What a gorgeous knife, but clearly meant for its intended pupose. There is no doubt that P. will treasure it both for its beauty and for its utility.
Thanks again for everything!

--E.M.


Jay, I'm looking forward to the Aquila- Thank you for the excellent craftsmanship. "The quality of a person's life is in direct proportion to their commitment to excellence."
--Vince Lombardi

--M. M.


I would like know the availability and price of this knife.
USAF Pararescue "The Kid."
I don't like to assume, Will it be suitable for Ocean diving?
Thanks,
P.H.

My response:

I make "The Kid" in various forms. The simplest is bead blasted 440C Stainless steel with Nickel silver bolsters and bead blasted micarta handle with a clip type kydex sheath. It costs $245.00
"The Kid" pictured on my website under "Military and Pararescue" knives is the full blown model, featuring mirror polished 440C stainless with fuller (blood groove), 304 stainless steel fittings, Gemstone handle, double locking gravity hook blade (all stainless steel machined components with close tolerances) and a Locking stainless, kydex and aluminum sheath. It is "marine grade" salt water proof and costs $1200.00
There are variations between the two. Take a look at the fourth pic on my "Current Knives for Sale" page. This knife falls between those listed above. It is the only one I have available now, and can be custom engraved for personalization.
Currently, I have a backorder list from 4 to 6 months long. I would be happy to make you any knife of your choosing, just let me know!
Jay

Please note: this is an old email, and the prices quoted are no where near current! These knives are quoting three or more times that currently. This is a great testament to the appreciating value of fine custom and handmade knives.

Top of Page

"Those pics are great! You've done a fine job, sir."

--J. M.


Your Web Site-

Dear Sir,
I am impressed; you are the epitome of a professional.

--Alan


With time and patience, even the mulberry leaf becomes a silk gown.

--Chinese proverb

I received the knife and it is superb! Excellent craftsmanship and finish. Very unique design to say the least. It is everything you described and more. What surprised me the most was the sheath. I wasn’t expecting it to be as heavy duty and well constructed as it is. The photos on your website do not do justice to your sheaths. All-in-all a most professional job.
You are certainly a world class craftsman, and well deserving of your reputation. Many thanks for the long hours you put into creating my handmade masterpiece.

--J. K.


Howdy Jay,
This evening I wore the piece of kit for the first time (Hooded Warrior).
Dude, you knocked it out of the park.
This assembly fits like I was born with it.
That is all.

B.S.


Hello Mr. Fisher-
I was just wondering if you sell just knife blanks- If so- I would be interested in 2 different ones. By the way- you do some of the most outstanding hand file & serration work I have seen to date. It only shows how far I have practice & learn.
Regards,
J.S.T.

My response:

Hi, J.. Thanks for writing and thanks for your kind words.
I’m sorry; I don’t make blanks to sell, and can’t really refer anyone who does. Please try to make your own; it will be a great experience for you, and you’ll make them just the way you want!
Thanks and good luck,
Jay

His response:

I didn’t think you would respond- you are a stand up fellow- ( not to many left ) hope to get your book when avail. & besides the fact of not being able to afford such work horses- you are the other reason I got into making knives. I was never aware what beauty could become of a combat tool- but as soon as I saw your work- it is all I do in spare time beside the kids & dog. Well I’m sure you tire of peoples glorification- But Dammit Man- unbelievable. I bet my collection of various files is ridiculous – I don’t see how you come up with some of them-
To cut the propaganda short – I haven’t bought for neither my son nor myself (not even as x-mas for my older brother “the Hunter”) a company made / store bought knife in 5 years aft seeing your beauties. Bit more crude & not as factory looking but my brother loves the 2 I’ve made him- & my son (with very much needed age under the belt) will love his too. You have made on old time study of fire & steel into something more than a tool for combat or hunting & with all that time it took me to type that nonsense up – all I’m saying is “Thank You Sir.” You truly are a master knife smith, & you’ll always have a keen eye fan watching to learn more- & I'll expect nothing the less.
PS “Thank goodness for the net” Just don’t tell my kids I said That !
Regards, & Keep up The Beautiful Work!
Sincerely,
J.S.T.

My response:

Hi, J.
Thanks again for your kind words; you’re welcome at my site any time!
The only thing I can offer about filework is practice, practice, practice. I’ve had to relearn much of it as I had to shift from my right hand to my left after a shoulder injury.
I look forward to seeing some of your knives one day.
Thanks again,
Jay

Every maker is on their own journey. I'm honored that J. can consider my work a bit of inspiration for his own path!

Top of Page

Hi, Jay,
Just received the knives. So very glad I called you to ask about "Tarazed." I am amazed at the beauty of construction and the way all the parts are so incredibly complimentary! So far, Tarazed is my favorite treasure from your hands.
Anxious to see what you have planned for the future.
Bless you Jay!

--G. D.


Hi Jay,

I've been using Phact for 3 months to the day, and it has a special place in my heart and in my family.  Phact makes an appearance at every Sunday/Holiday dinner whether it be steaks, Tri-tip roasts, Picanha, thick cut pork chops, or bbq chicken. In fact, my kids (10 and 7 years-old) now get excited for a meal when they see "Dad's Jay Fisher Knife" set at my place at the table.

Your work is truly amazing Jay.  Phact is stunning to behold, but more importantly it's a functional work of art.  Even though it was not a commissioned custom piece, it fits my hand like a glove. The 440c handles every cutting task with ease and cleans up so easily after use, and there's not a single blemish on the blade after 3 months of use!

On a side note, thank you for you most recent page on Food Safety in Kitchen and Chef's Knives. It is so badly needed in the culinary industry and clarifies so much misinformation. I try and share the link whenever carbon steel knives are recommended for kitchen use.

Thank you for your latest comments about your YouTube heat treat videos.  I must say I was sorry you took them down, since a I probably watched them a dozen times, but I understand your high standards and your desire to present the material in the best possible way.  If you do still have them saved on a hard drive somewhere, I'd love to purchase a copy for my own personal edification and collection.

Thanks again for all of your work and dedication to the profession!

God Bless,
Adam


The knife is functional, clean and easily maintained. The sheath protects the weapon, secures and allows for various ways to carry it. This sheath allows for any type of transport to be used without having to worry about the knife coming out of the sheath or falling off a belt.
Overall an excellent knife and sheath.

--P.K.


"Clarau" fine handmade knife, obverse side view: blued O-1 tool steel blade, hand-engraved 304 stainless steel bolsters, Lapis Lazulii gemstone handle, lizard skin inlaid in hand-carved leather sheath
More about this Clarau

Dear Jay,
I was unable to find ATS34 or 154CM steel composition or heat treat on the internet. Do you have a web location or file on this material? As an example I have attached a PDF file of a steel (not used for knives) crucible S7XL that is a better version of S7. On the second page of this file on the right side are a table and a graph of both hardness and impact toughness data. This shows that for this steel the optimum tempering temperature is 400 degrees F for the local maximum toughness and a hardness of RC55 to 58.
You may benefit is you had similar data for your steels.
Very Truly Yours,
W. C.

My response:

Hello W.
I do have similar detailed file sheets from all of my manufacturers of the tool steels I use. I don’t post them on the site, nor do I have plans to. If you are looking for specific steels data sheets, I suggest you contact the individual manufacturer, as the steels vary a bit and each manufacturer has their own recommendations.
Thanks again for your input.
Jay Fisher

This web site is not a data reference or "how-to" source. The information I include on this site is mostly for the knife enthusiast, knife user, knife collector, knife client and knife owner, not the knife maker. His response:

Great! I am glad you asked the manufacturers to give you the data. Do you take into account the grain direction of each piece of steel before making a blade?
W. C.

I'm not really sure where this conversation is going. I get these emails from time to time, people who seem to be checking up on me, making sure that I do my job right, I guess. I wanted to tell him that it's all okay; I know what I'm doing; I've been at this a while and have done well. Since W. is not ordering a knife, I stop the conversation.

Top of Page

I just received the Blackwater in the mail and I am truly astounded. Every aspect, tip to tang, is the work of a true craftsman. The photo was basically useless as a judge of the work, none of the details are fully expressed. The amazing geometry, the beautiful engraving, the complexities in the handle, the lines and the edge... oh boy. You realized that a knife is the whole package and you took time to perfect EVERY aspect. NO weak points, which is very rare on a knife as there will always be one thing I'm not satisfied with. What impressed me the most was the PERFECT balance. I have used thousands and own almost a hundred (from $4000 damascus folders to production neck knives) and I can say without question that this is the most balanced knife I have ever, ever had the pleasure to handle. It glides through the air like water. Beyond description. I can only dream of what a Katan by you would feel like. Add in the fantastic sheath and it is the best bargain on a knife I have ever bought.
Jay thanks again, and from my son whom I'll no doubt pass this on to.

--A. D.


Hi Jay,
Thanks for the great site, sharing your beautiful knives, and your knife knowledge and philosophy.   I was raised as a mechanic and welder in my family’s heavy equipment business and 30 years ago, the knowledge you are freely sharing was handed down father to son and not shared to the world.
My wife is a professional pastry chef, food blogger, and teacher.  I thought she needed a custom knife for valentines or her birthday and looking at all the $500 ‘customs’ I thought, hell I could do better than that I have a metal shop in the garage.  I started reading the knife forums and the usual drivel about real knives being forged.  Being disabled, my hammer swinging days are over.  Then I ran into your site. I spent the last week and a half studying as much as of your site as I could digest and as importantly as how, the why's.
Thanks again for the copious knife knowledge, I help my wife on her blog so I know how involved building and maintaining a site is.  If I was blessed with riches, instead of free time and enough knowledge and tooling to be dangerous I would put her name on your list for gorgeous Concordia, instead she will get a well-crafted RogboBilt O1 chef and paring knife, plain but made with love.

Best,
Roger


"Aquila" obverse side view in mirror polished and hot blued O1 high carbon tungsten-vandium tool steel blade, hand-engraved 304 stainless steel bolsters, Golden Plume Agate gemstone handle, hand-carved, hand-dyed leather sheath
More about this Aquila

Jay,
I just opened the Aquila and am ecstatic with it. I have some nice knives from other makers but this is on a plane of it's own. The physical result of your experience, skill, care and artistry is a marvel. I'm literally laughing and shaking my head at the perfect fit of the stone in the handle. And I mean perfect. The finish on the blade is gorgeous. Best of all is the feel in hand. I could go on, at length, but you know what it is; it's an awesome knife.
I am going to have to come to New Mexico and shake your hand, and see if you'll create as wonderful a chef's knife for me.
Many, many thanks and much respect,

--M. M.


Jay,
Received ok; it's awesome.

Thanks,
D.


Jay,
I know your busy so I’m not really expecting an answer to this email. I came across this page looking at other knives online and just wanted to compliment your work. I LOVE knives and enjoy collecting them, but am not able to afford one of these… That said, you make some beautiful knives!!! NICE WORK!!!

Best Regards,
Adam D. Peavler


Dear Jay
After many years of casual thought I have at last decided to do something about that handmade knife I have always wanted. Several weeks of internet research have seen me visiting and revisiting countless websites.
Sadly, I can't afford a knife from you, but I felt that I should let you knifemaker will be much better informed, and the knife I will specify will be a much more refined object, simply because of the wealth of information on your website. It is clear from your work that yours are opinions to be respected.
Who knows, maybe one day I will be able to e-mail you with a commission.
Until then, best wishes,
J. M.

My response:

Hi, J.
Thanks so much for the nice comments. Good luck on your quest for fine knives!
Jay

This is what I mean about service to our knife making community. Whether J. buys from me or another knife maker, he will be making a more informed decision based on what he reads here.

Top of Page

Hi Jay.
I just received the Tribal Helhor and unpackaged it. I'm at a loss of words. I absolutely love it with all my heart. The knife is gorgeous, it feels so good in my hands. I love the tribal engraving and the Pilbara Picasso Jasper compliments the wood tones of the stand and sheath. The sheath and stand are a work of art alone, but all three put the entire piece together as a whole.
It's better then I could have ever imagined. I love it, love it, love it.
I'm going to cherish it for the rest of my life.

Sincerely, R. S.


It arrived yesterday sir. It is absolutely gorgeous! And the flashplates with my unit crest are outstanding!
Thank you so much.

--T. W.


"Axia" tactical custom knife with stainless steel flashplate, black lacquered brass flashplate, engraved red oak emblem, emblem 118th Infantry Regiment
"Axia" Tactical Combat/Commemorative Knife

Hi Jay,
Thanks for all of the informative info on knives. I am very new to knife collecting, and admittedly, a bit ignorant on the subject (a little less after reading your site).

Thanks,
G. P.


Hello,
This is the first contact I have ever attempted to any manufacturer, company, or individual creator of anything ever. I'm 54 years old. I came across this website and your amazing knives quite by accident, web surfing for a good quality survival,/combat, quality knife that I could trust with not only my life but my families if I ever was in a situation that required it. I have looked at hundreds, finally bought a Gerber hunter/ survival knife; its seems to be a quality blade, too short, but I believe it wouldn't break, I'm not happy with the edge or length or overall profile/ geometry its got @1 3/4 serration near the grip which kinda makes the straight blade edge too far from the grip to control but its the best I've found save an old Kabar bayonet my dad( ex ranger) had from Korea. Both just aren't quite right and seem crude to me, I have not abused either and wouldn't anymore than I would abuse any other tool I own. They just lack the right feel. Any knife, any good knife should be an extension of your intent....balance, weight, visually, and most importantly it needs to cut anything you intend to every time without fail: no chipping, no breaking, hold an edge. Just as you mention in your incredible explanations it needs to be a perfect combination of hardness, flexibility, balance, perfect blend of form and function. That's just not going to happen with a mass produced knife.
I have some experience In engineering, heat treat and metal fabrication, over 30 years, my dad for over 40 years before me. I live to create, anything really, but to me form has to meld with function, or its just not complete. It's not enough for it to work, it has to look and feel right as well.
I don't have the words to express the respect I have for your creations, not just what they are but especially what went into it. Someday I will ask you to create one for me. It will have to be the perfect size, shape and I have absolutely no doubt if you make it it will function as well. I hope to send you a drawing and a idea of what I'm envisioning and let you mold it, tweak it , whatever into the perfect blade .its going to be one of the most difficult things for me to do because ideally I would be there watching you do it. The things I have that I value the most are things i have made or modified myself. Because of the demand and your exacting methodology I'm sure that's not possible for me to do.
What you do and how you do it is truly unique, especially in this age of mass produced disposable crap that passes for quality. The value of what you represent in your pursuit of perfection in your art is really priceless. That being said I hope you have taken an apprentice who could perhaps continue in your craft, it would truly be a great loss to have the skill and knowledge you have worked so hard to achieve be lost. Every once in a great while someone emerges who has transcended those before , as I believe you have. Please don't let it be lost. I would jump at an opportunity to see you ply your craft in person; would you ever consider having someone visit for a while to maybe watch and learn something about how you go about you trade? Hopefully you will he able to complete my knife and probably a fighting type sword if I can scrape up the cash for both, they will undoubtedly become heirloom blades for my future family.
I had to write, obviously you don't need my approval, or my compliments, I'm sure you get many from professionals who use your knives in real, meaningful situations. I just never felt strongly enough about anything to take the time to write before.
Thank you for being who you are, the world needs more like you, not just blademasters but any who would put the time and effort into their chosen passion as you have. That lack of passion is lost on our youth today and its a tragedy. I just felt compelled to say something, sorry for taking up your time. I really would love to have an opportunity to talk with you and see how you make these incredible blades on your website, as I'm sure many many others would as well.

Thank you,
Dennis


Jay,
Wow.  Perfect.  Thank you. I'm sure my sister will love it - I sure do.

And later:

Jay,
Just letting you know it got here alright.  Took a quick look - beautiful.

--J. H.


I received the Malaka a week ago. I did not write immediately because I wanted to take time with it and gain an honest opinion after spending time with it. I have carried it everyday since then. The finish is exactly as exact as I had hoped. The detail is enthralling. The knife came sharp and well packaged. I appreciate the care taken in the duffle and assorted bags and tins. Each the right size to contain all the additional parts and pieces.
I know that this knife is well into the collectors range, but I look forward to it being my constant companion on camping, travel, and daily life through the rest of my life. Below I have included a photo of the knife with the care products you recommended. I include this because I want you to know that I appreciate not only the care and effort you put into not only crafting this knife, but also into education about all aspects of your knife making.  I want you to have confidence that this blade will be cared for and maintained with as much diligence as you invested in it. Thank you for creating this wonderful functional piece of artwork for me.

Respectfully,
C. L."Malaka" custom handmade knife with owner's care kit


Hello Jay,
I have an idea for a knife but I need an experienced knife maker who can put it on paper and build it. I read your description about the $100 deposit for designing the knife and I accept. Whats the best way for me to describe my idea to you? Thanks!
L.

My response:

Hi, L. Thanks for writing.
Please don’t send any deposit until we have a general idea of your project. Do you have a drawing or description you can email?
Thanks,
Jay

His response

Hey Jay,
I'm in training for Pararescue and I want a graduation knife. Ive always dreamed of having a custom knife. What I'm looking for is a fixed, double edge, and spear pointed blade. I want to use it on daily ops, but i dont want it to look like a typical work knife. I want this knife to look great when I separate from Pararescue so i can put it on display or possibly give it to one of my kids before I pass on. The look I want this knife to have is a cross between a medieval righteous tone and a modern military presence (if that makes any sense). I drew a outline in ms paint.
L.

My response:

Hi, L. Thanks for your service to our country, and thanks for training for the best of the best!
I think I get the idea of your request. I don’t know if I would make it just like you have drawn, but here is a knife that was designed and is being used by a PJ that is double edged and tactical, with the serrations. Please take a look a the Lynx.
A Lynx like the one shown would quote at 1295.00, and delivery time would be 48 months. I do have an accelerated program though that can get you the knife sooner. Let me know if you’re interested and I’ll give you the details.
If you want to work up a custom knife, feel free to come by the studio; I’m on the eastern edge of the state.
Thanks again for your service,
Jay

The accelerated program I mentioned to L. is with James Beauchamp, collaborative knives in tactical form.

Top of Page

Dear Jay-
Just a short note to let you know that my Cyele arrived yesterday and I put her right to work prepping dinner. My initial impression is one of lovely lines, nice balance, and great artistry in her design and fine craftsmanship in execution. I own a number of custom kitchen blades, and your Cyele is a standout in every respect.
Many thanks, Jay - and my deepest appreciation for your skill.

--Doug Cremer


Hello Jay,
The Andromeda K2 Azurite arrived a few minutes ago. It is stunning. I think the photos do not at all do it justice, even though they are very good photos. I have a couple of 10x loupes for close inspection work, along with some daylight illumination for good color rendition, and spent a few minutes admiring the K2 Azurite. I have never seen anything like it. Very beautiful, much more so in direct examination than in a photograph.

The sheath complements the knife very nicely. It is a real work of art.

Thank you very much for making and selling such a wonderful knife to me.

My best regards,
--R.


"Andromeda" obverse side view in T3 deep cryogenically treated CPM 154CM powder metal technology high molybdenum stainless steel blade, 304 stainless steel bolsters, K2 Azurite Granite gemstone handle, hand-carved leather sheath inlaid with blue rayskin
Andromeda Chef's Knife with K2 Azurite Granite gemstone handle

Jay, I'm almost ready to send you send you my drawing. I re-did the whole blade after I thought about my fighting style. No more "impact weapon" butt-cap. It's a MUCH more elegant blade with a very strong emphases on the stab; similar to a Stiletto. You might think it's too thin width wise. Which brings me to my question about your kydex sheaths. I'd like to be able to strap it on my forearm, upper arm, lash it on a modular/ MALICE/ALICE vests, or the traditional way on my belt. I think a few of those options might require slot-holes on outer edges of the sheath.  Will the fact that the knife is streamlined also make the sheath itself extremely compact/thin? I can also draw that out as well if that's a little hard to picture. Thanks for your time.

My response:

I'm very interested to see your drawing of this blade. We can talk about the geometry then.
About the sheath: It's quite a challenge to have a universal sheath that fits all mountings. When I've attempted this in the past, the client usually opts for his main or sometimes secondary wear, foregoing some other options. The reason is that with a lot of options, the sheath becomes larger and larger, with clips and straps and rivets and rings... it gets pretty big. Some clients have multiple sheaths for a single knife, I've done this too.
About forearm wear, this doesn't seem to work well, because the wrist end of the arm is so much smaller than the meaty part toward the elbow that when the knife is pulled, the sheath slides down the arm with it. I've seen this countered by a set of straps that goes up the sheath arm, around the neck on the opposite side! That's a heck of a lot of wear for what seems to be a simple sheath. These are just some observations for your consideration. I'm looking forward to your drawings.
Thanks,
Jay

Top of Page

By the way, the beauty and hand of my Gemini never cease to amaze me. To those to whom I've showed it, it seems that they can't stop handling it. Needless to say, they are very appreciative of the work of the piece. Truly a work of art.

--J. H. A.


Jay,
The knife is breathtaking! Thank you!!!

--S.


You already know you do fantastic work, so I really don't have to play the drooling fanboy there.
I've been poring over your writings (also good, by the way), and have been very impressed by the way you define your field. I have to agree wholeheartedly with the definition of "custom" in regards to a unique or handmade object. Also, even though you "don't teach," I have learned a vast amount about knives and an artificer's ethic since coming to your site. Thank you for the inspiration and seemingly bemused humor of your writing. Keep up the good work.

I like the drooling fans; who wouldn't? This guy gets one of the main purposes of the website, too: that a large part of this job is education.

Top of Page

Evening Jay,
I wanted to give you a proper testimonial now that I've had time to use Sirona at work for a day. I couldn't wait to bring out Sirona at work, everyone noticed the shining mirror polish immediately while I was getting ready to small dice about 150 tomatoes to keep the restaurant stocked for the day. Sirona was well up to the task. The knife felt like an extension of my hand, and the extra weight also feels good, knowing that I'm not using some flimsy piece of carbon steel that I'm so used to. After seeing in person how good a knife could be, my first thought was that I can't wait to order my next two! It was a pleasure to speak with you on the phone and I look forward to doing business with you in the future.

--A.


Hi Jay,
Pyxis arrived safely and I have been admiring it. The size is just perfect --it is really a piece of fine jewelry. It fits the hand perfectly and the balance is spot on. I am not sure that I will be able to keep from carrying it and using it--it is the exact size I need for many every day small tasks, and the size is not intimidating. I will feel comfortable using it where many larger knives would not be welcome. The engraving, gemstone handle, file work are all impeccable. Thanks for another work of art!

--D. E.


"Calisto" custom handmade knife, obverse side view, 440C stainless steel blade, nickel silver bolsters, Fossilized Cretaceous Algae gemstone handle, locking kydex, aluminum, stainless steel sheath
More about this Calisto

Jay,
My knife arrived last week and I've been trying to come up with a way to describe it. At some point it starts to sound cliché when you hear "You've outdone yourself," but the truth is that it is difficult to actually put into words the kind of presence one of your knives has when you actually hold one. The Vitruvius-Vega is a beautiful work of art and at first I had the same reaction that anyone who has seen it had which is the standard "You aren't going to actually cut anything with that are you?" I admit that it was difficult at first, but this knife was created for a purpose and I intend to use it that way. After using it to prepare a meal the other night I found the knife, although big, to be comfortable, balanced and incredibly delicate for such a large blade. The combination of beauty and functionality makes using this knife more of an "experience" than a chore. Of course as soon as I was done I washed, dried and polished the knife before putting it away in a way that my other kitchen knives have never seen. So yes, it's cliché, but Jay you've outdone yourself. It was worth the wait and rest assured that this knife will fulfill the purpose for which it was designed and created.
I look forward to our next project.

Thanks, D. B


Just got the knife! Wow, it is so light and quick in the hand!!!

--S.


This knife is just exactly the size of my all time favorite knife. It's about 100 times better, but it is perfect.

Thank you so very much for selling me these knives. I am somewhat at a loss for words to describe these. Perfection made real, in my hand. Wow.

I used the purple jade Andromeda to chop some bell peppers, apples, an onion that hadn't yet escaped or gone iffy, some meat products I have, mostly for my dog, but she lets me have some of them if I'm good. Didn't have any celery or potatoes to try. Potatoes seem to have a grudge against me, for something I did wrong, or maybe they just don't like my looks.  Found some carrots, they went zipity-lick and done.

  The Andromeda size and shape is a better version of my 'standard' knife. I usually do the majority of cutting with knives with the same basic length and grip size. I spent several years using knives of various lengths and shapes, and at the end of it I was pretty settled on the 5" blade general use length, and not especially worried about the heel length. The Andromeda heel is just about right.

Cheers,
--R. N.


Mr. Fisher,
I have just spent about 12 hours reading your web site and have not finished yet. I wanted to thank you for the time that you have put into the site as it has answered many questions that I have had on custom knives.
I spent 30 years in the Navy 13 at sea and 17 in the Seabees and I carried many knives on my Seabee 782 gear as well as at sea. They were all factory knives, some of them quite expensive for a young sailor. I wish I could have found your knives in 1966!! Your knives are truly works of Art!!!
I have been working on a design for a type of bowie/tactical/fighting knife for years. I am not sure which steel would be best. I like the ATS 34 and the 440 series steels as well as L-6. I do not know the other steels that you mention on your site (I know you didn’t mention L-6 but I thought that I would sneak that in to see what you think about it? LOL) especially the so called super steels.
The steel that I want will have a high polish finish – I am of the school that believes if you have to use your knife in a fight you want to intimidate the hell out of the enemy and a big shiny knife in my experience does it every time – and can withstand the rigors of combat as well as everyday usage as a everyday survival use for everything knife. That is a tall order and I know that that such a knife most likely does not exist. This has meant to me anyway that the knives that I carried were compromises and I hate to compromise when my life might me on the line. I am an old man now so the knife(s) that I get will be passed on to my son and his son one day or perhaps my daughter’s son. In any case, all of this has been going though my mind while reading the pages on your web site.
Damn, I am rambling.. I want to give it some thought to make sure that I get exactly what I want in a knife for a change without having to compromise. I will probably bug the hell out of you with questions, but I hope that the answers are not on your site and the time is worth while.
I really would like your opinion of L-6’s suitability as a knife steel.
Thanks for your time
E. L. F.

My response:

Hi, L. Thanks for writing, and thanks for your service to our country.
L6 is a low alloy special purpose tool steel. It’s most frequently used on saw blades and in blanking, forming and trimming dies and feed rollers where toughness and resistance to shock loads must prevail over wear resistance. Toughness is resistance to breakage or fracture. So, you can imagine that a band saw which has to flex a lot would need to be tough. It has some applications in cutlery where that toughness is needed. Unfortunately, it has no corrosion resistance and quickly and easily rusts. So there is a large and looming problem here. Knives that require toughness, like fillet knives or knives that must spring and bend (i.e. kitchen cutlery) would do well to have the toughness of L6, but it rusts so easily that it is not a good selection for this purpose. Most modern knives have some corrosion resistance, and most knife owners insist on high wear resistance (usually higher hardness overall) so the use of L6 is limited. If I have to use a steel that can rust in a knife application, I usually opt for O-1, because it has tungsten and vanadium and has a greater hardenability and wear resistance.
I hope this helps, and I’ll post it on my website for future reference.
Thanks,
Jay

Top of Page

Hi Jay,
The Macha Knife is Awesome!!
Mate, the knife you sent me is totally wild! It has a great feel in my hand and well-balanced too. This knife is already fitted to my Tac Vest and it will serve me well over here in Baghdad.I have shown only a few and some of them are very excited and one who wants an exact replica of my knife.
Thanks again Jay for this truly remarkable weapon! I will be in touch,
Your Aussie Mate in Iraq!

--T.M.

If you cant Stand Behind our Troops...Then Stand in front of them


--Achelous looks absolutely stunning. It is awesome. I love it. It looks so light, beautifully curved but when you hold it, it is a substantial piece.
Thank you very much for it,

--J.


Beautiful—

...it is a master work—detailed, exquisite, a gift worthy of a long term mentor.

Thank you,
--L.


"Sanchez" Custom Chef's Knife, obverse side view in 440C high chromium martensitic stainless steel, T3 cryogenic treatment, 304 stainless steel bolsters, Sodalite gemstone handle, stand of Cherry hardwood, Poplar, Sodalite Gemstone, Delicatus Gold Granite
"Sanchez" Custom Chef's Knife

Mr. Fisher.
Thank you for your wonderful and well informed site about knives.
So far I have spent quite a few hours reading fascinating info way beyond of what I was looking for.
I have masters degree from mechanical engineering. In the course of my study I have also studied some [steel] metallurgy subjects. I work as an IT contractor for a large steelmaking corporation. I *very* much appreciate your very sensible, balanced and pragmatic info on the topic.
I just wanted to say how much I appreciate the info and wonderful advertisements on site - the pictures of your fantastic work.

Best regards
--Stanislav
from Slovakia


"Achelous" in ATS-34 high molybdenum stainless steel blade, hand-engraved 304 stainless steel bolsters, Indian Green Moss Agate gemstone handle, hand-carved leather sheath inlaid with frog skin
More about this Achelous

Hi Jay,
Sorry, not a 'serious knife purchase enquiry' at the moment.
Just, what bloody amazing work. Your knives are art!
Yes I'm looking, but I was actually doing a bit of research on ATS-34 ... (for a purchase, I'm not a knifemaker's arse) ... and found your comments during a search.
Okay, enough dribble. Just wanted to acknowledge what you already know, your work is a step above anything I've seen before, and I've been looking around for a long time.

Cheers,
Rodger,
Adelaide, Australia


Dear Mr. Fisher,
I was compelled to write you and thank you. I do not work with knives, but I am a craftsman building high end French horns. I return to your site often when I feel discouraged or unclear about the direction of my business and the struggle to produce meaningful work. Seeing your uncompromising commitment to quality and beauty helps me to refocus and redouble my efforts in the hopes that I may one day have a portfolio as impressive and impactful as yours. Thank you for setting a high bar and being an artistic inspiration for this craftsman.

My best,
Jacob Medlin


Thanks for a great web site to read while sitting on call in the USAF. Gave me something to start saving for and hours of enjoyment even if I can’t afford one just yet.
Thanks again.
J.C.F.

My response:

Hi, J.C. Thanks for writing, and thanks most for your service to our country!
Jay

Top of Page

What struck me first was the appearance of the knife. Without touching it, my first thought was - this is entirely to pretty to be put to work. I would find out how far I was off the mark a week later. The knife has superb balance and feel. It is an extremely versatile and effective ( i.e. lethal) design, despite it's origins being a "working" knife. The simply utility of the design is incredible. I put the Quark through the paces, no doubt. With my previous commercial and issue weapons, the edges had a short half life, and I would usually spend some time every few days refining them. The Quarks edge has held up amazingly well, and I confess that I found no need to resharpen after 3 weeks in the field. The Quark easily met all of the criteria I asked about during our initial discussions.
I'm incredibly impressed - and from this point forward, a loyal patron.

Thank You Jay,
M.M.


You can not make a difference, unless you're doing something different.

--Unknown

Hello, Jay!
Received the knife on Tuesday; it is perfect in every way. I still cannot figure out how you come up with so many different designs that you carve on the edges!

--P.


Just another quick note to let you know that I am just loving carrying my new knife. It's such a beautiful piece of artisan work.
Thank you again.

--D.


Interested in my knife patterns:

I am consulting for a company that makes direct manufacture machines. These systems can build anything from simple to very complex geometry by printing materials layer by layer. In the past, this has been limited to prototyping applications [Rapid Prototyping] but recently the technology has turned the corner and offers new material strengths and build speeds that can be considered for direct manufacturing. Materials are thermal plastics and could be considered for handles only. The more complex and custom the better suited this technology becomes.
B. M.

My response:

Hi, B.
Thanks again for considering my work field for applications of this technology. Unfortunately, I don’t think that thermal plastics are durable enough for combat grade knives of the high quality that is demanded of the blades that my military clients require.
Thanks again for the consideration, and good luck on your campaign.
Sincerely,
Jay Fisher

Top of Page

I have to search for words to describe my impressions. My first impression was that the sheath by itself is a substantial and excellent piece, solid and well executed. My second impression was, “Man, how do you get this thing out of the sheath!”, but that was a function of working the knife in and out a few times. The Mercator itself seems to defy physics: it is a large, substantial knife, yet the balance is such that it feels like an extension of the hand and without significant weight. The fit and finish are impeccable, the fit to the hand very natural…the Mercator just begs to be used! However, I will leave that to the Special Forces Officer for whom it is intended! I am very confident that he will be very pleased with it!
Thanks, Jay, for your cooperation and craftsmanship. I look forward to working with you on the new project!
Best regards,

--E. M.


Hello my name is D. R.,
I hope you spare a moment for praise. Your designs are inspired and are beautiful forms of true art. They are both functional and beautiful. I aspire to one day make some blades of my own and you set example of perfection and practicality. I am on dialysis and do not foresee being able to afford an example of your art, but through the website I am, to some extent, able to enjoy the art of blade making at its highest level.
Thank you, for the website and the in depth attention to information and fine photography it is truly well executed.
Thanks Again,
D. R.

My response:

Hi, D. Thanks for writing, and thanks for your kind words about my site and my work. I look forward to seeing your knives one day!
Jay

Top of Page

Hello Jay,
Stunning is all I need to say about this knife... I love knives and this one is the best. It's art form at the highest level. Of all the people I've shown my knives only one has understood what custom handmade knives are about and it is about the art of the knife. I could good on and on but I do know you understand what I'm trying to say. Thank you Jay and I do hope to meet you some day.
God Bless, Take care,

B. P.


Since ordering the knife I have spent an average of an hour per day going through your website,  but I still have quite a ways to go. For me that is saying a lot because I usually have no free time for such recreational things. I have willingly shirked some responsibilities over the past week simply to keep reading your website! Your writing style is incredibly informative and clear. I look forward to reading your books. And I see there is a documentary coming out on you. Looking forward to it. 

--B. H.


I request permission to use your name and material descriptions in a display I'm preparing for various knife shows. The entire display centers around KNIFE HANDLE materials and your writings would be included in a 3-ring binder beside knives and material ( some of which will be ordered from you). Full credit will be given to you for the content.
Please reply ...
B. S.
Thank you for considering this

My response:

Hello, B. Thanks for writing.
I'm sorry, you do not have permission to use any of the photos, text, writing, or any data or information from my web site, as it is all copyrighted.
Thanks for understanding,
Jay

Top of Page

Howdy Jay,
I wanted to drop you a quick line for several reasons. First and foremost, your website is by far one of the finest custom knife sites I've been to. Unlike every other website out there now, yours actually has a warm organic tone to it. Not only is it full of great art, info, and patterns, I (a horrifically computer illiterate newbie) can easily find my way around the whole site.

--J. Costello


"Anzu" obverse side view; Tactical knife in bead blasted 440c stainless steel blade, 304 stainless steel bolsters, G10 epoxy-fiberglass laminate handle, locking kydex, aluminum, stainless steel combat sheath
More about this Anzu

Hi Jay,
I picked up your Uvhash today; what a superb tactical knife. I have stolen the last 2 hours contemplating it, and it is indeed the best tactical knife in every aspect I’ve owned. I am still working on the grip comfort... I am going to be testing it and fielding it in the not so distant future. The knife is a sheer pleasure, the workmanship superb, the sheath is almost on another level—if possible. By far the best sheath...such a crucial part of any tactical knife. The tension is perfect as it came, the knife glides out with ease quietly or with a soft “click” depending on what one’s needs are.
I can’t say enough. Many, many thanks Jay. A dependable beauty—I can’t ask for more.

With Best Regards,
G.


I am a PJ stationed at the 38 RQS at Moody AFB. I was interested in having a modified version of the "Midnight" tactical knife made. What I am interested in is having the more aggressive serration pattern and having the handle done in maroon linen with a lanyard hole. Also, I would definitely want a locking sheath and loops for a belt and not a belt clip. If you could give me an idea of what that would run and a time frame on production that would great.
Thanks,
K.C.

Hello, K. Thanks for writing.
Sure, I can do a Midnight Tactical in the way you requested. I need to know: Hot blued bead blasted high carbon alloy? (That's the flat black look) Or bead blasted stainless, or mirror polished stainless steel? The locking stainless sheath adds about $150 to the cost of the piece. The prices range from $395 to $495 with micarta handle.
Thanks,
Jay

Please do not go by this quote; this email is several years old and prices have gone up considerably!

Top of Page

Dear Mr. Fisher,
I wanted to take a moment and send a word of thanks to you and your organization for having such an informative website. I was trolling the web for grinding ideas when I happened upon your site, and I have to say, wow. I am a hobbyist maker on my best day, but, I do have a set of successes that I take pride in. I have a severe aversion to making "crap," so when I get solid advice on making a better product by veterans, I am all ears.
When I first started in on your site I thought, gee, this guy is full of himself. However, even if you are a cutlery steel sales rep with tons of book smarts behind you, I think there is no better schooling than listening to those who have trod where you are now treading. Your site should be sold as hokum repellant.
Seriously, thank you for giving of your knowledge and time to those of us who need a good tuning up occasionally.

Much respect,
Brian

My response:

Hi, Brian.
Thanks for writing and thanks for your kind words about my site and work.
Brian, you would do me a great honor if you allowed me to post your email on my site.
The internet is changing the world of knives, and more people are learning what constitutes a good, solid piece of work and what is sold as hype. For so many decades, lack of information has kept the masses in the dark, with simple catch phrases and power words, without any facts or specifics to back it up. My goal, as an individual artist and craftsman, is to share what I have learned for others to see and benefit from, no matter whether they are a client or another knife maker. I’m glad you found the information useful, and I hope to see your knives one day!
The very best of luck to you and your family!

Sincerely,
Jay

Greetings Jay- The honor would be all mine, good sir! I have a lot to say about the abuse of media for one's profit. Flagrant(and not so flagrant,) misinformation in the cutlery field will only breed more distrust and eventual apathy in favor of the path of least effort. I work in the construction trades, and have a great many opportunities to "enlighten" my buddies on anything knife related anytime they gripe about their pricey blade failing them in the field. I prattle on about proper edge geometry for the proper steel, right and wrong sharpening techniques, blah, blah....they don't want to hear it! They carry and use the knife as if it were made of titanium and diamonds. When it goes dull after cutting open 10 bags of concrete, I say, "that's pretty good for cutting concrete". "But it's a SUPER steel, dude", they say. They were sold a bill of goods and, in their minds, the flashier, the better. I'm prattling again....please feel free to post my e-mail, Jay. Like I said, the pleasure is all mine.

Be well,
Brian


Jay,
Great explanation on mirror finish on a blade. Your site is so comprehensive, it is truly a reference work all on its own. What a tremendous amount of work you have put into every aspect of your work.
G.

My response:

Hi, G.
Thanks so much for your comments. Please remember me when you want a fine custom handmade knife!
Jay

G. mentions an often overlooked aspect of this profession: hard work. He can see what I've put into this site, the knives, and the profession overall. Thank God we have a country where an individual can work hard and make a success of his life; there are so many other places on earth where this opportunity is not available.

Top of Page

I wanted to send you a short note to let you know just how much I am enjoying and owning the fine Muleshoe knife you made. It embodies the practical and the artistic brought together seamlessly by your marvelous craftsmanship. I look forward to using it for many years to come. Clearly a knife designed for use, it is also stylistically and elementally a true New Mexican knife. I really do appreciate it. Thank you again for coming up with a useful tool that is so beautifully evocative of the place I call home. I wish you the best of luck in all you do, and I hope you keep making knives for a long long time to come.
All my best,

--J.L.


Jay,
How would one get started in hand-making swords?
S.A.T.

My response:

One would study and read every piece of material one could acquire on hoplology (the study of ancient weapons) and modern knife and sword making.

I think I get what S.A.T. is asking. He's looking for a sourcebook on swords, with modern interpretation and historic designs and information, including enough valuable information to get him started making them. To my knowledge, there is no such book, but many books, texts, and historical references on the sword. The sword is a special case of weapon, and I go into detail on its special place in our world in my book.

Top of Page

Antiquity! I like its ruins better than its reconstructions.

Joseph Joubert
18th century French Moralist

Hi, Jay.
The PJLT is fantastic. I am so happy to have it in my collection. I can't tell you how much I love the beautiful "works of art" that others might see as only a knife. I assure you I see so much more and am so happy to have them. God bless you and thanks so much.

Sincerely, G.


Hi Jay;
I have just spent the last half hour staring at the knife which I received today. Words such as "AWESOME, WOW, UNBELIEVABLE" described my initial reaction. I looked at the knife over and over again. Each time admiring a different facet. I chose that word because like a fine diamond, each and every time it is looked upon, you see a different facet as it reflects the light at different angles. The analogy is striking. The quality of workmanship is extraordinary. The cut-outs along the spine, then into the handle, and under the handle add so much to the knife. The meeting of metal and gemstone is so exact one cannot see any space between the two materials. I have difficulty putting two pieces of wood together properly. The blade has a wonderful polished finish which contrasts the engraving on the handle. To truly appreciate the time, effort, artistic talent and artistic vision, one needs to view this as fine art first. Then can see this as a knife, an incredible one at that.
Yours truly,

--S.E.


Aloha, Jay,
Just writing to say, "Wow!" Stumbled on your site and LOVE it.
A new motivation for me to make money: So I can own a Jay Fisher custom made knife!
Your trusted friend,
I.

Top of Page

Hi Jay,
Good to hear from you again. I must tell you a story regarding one of the Gemini’s. I asked my son to bring them to me as I was discussing them with a friend. He picked up the knives in the display case and was not as careful as he should have been, and the next thing I heard was the sound of a blade bouncing on the marble floor. I was furious and started to measure my response as I picked the knife up, there was no damage, but there was blood on it. I looked at my son, 18, and he was just standing there with a blank look on his face. When I looked down, I saw he was standing in a pool of blood! What he had done was put his foot out to stop the knife hitting the floor and as a consequence the blade stuck into him. He lost about half a pint of blood and needed to be rushed to hospital, where he received treatment and stitches.
My son is reparable the knife was not, and my son James took the hit for the knife!
All the best,
D. A.

Top of Page

Hey Jay! Just got the knife today. WOW!!! The pics you sent me did NO justice to the knife at all. This is BY FAR the nicest knife I have ever owned! I was also pleasantly surprised by how nice the sheath came out. For the last few months I have been second guessing my decision for the locking sheath. Now I am glad I went in that direction. The pics I have seen of that sheath do not show how sturdy and well built that thing really is. I think you may need to show a side profile of that in one of the pics. That large slab of aluminum will show people its more than just kydex bolted together. I think your description says how it is built – but I didn’t understand till I actually saw it in person! Anyways, thank you for a GREAT knife! I will look forward to enjoying it for many years! Also, I'm already planning my next one. You can be sure that I will be showing it off to all my friends and letting them know about you and the quality of your work! (most already know as I've been talking about these knives for quite a while – but I think they will be astonished when they see they experience your work first hand
Thanks again,

--Adam Vuksich


Hello Jay!
I am very interested in purchasing a custom knife from you. Specifically the PJLT design. I have fallen in love with tanto style blades over the years, and yours by far are the most beautiful I've seen. I wanted to know if there was a difference between the 440c high chromium steel, and the 440c high chromium tool steel?
I'm looking for a blade that will withstand heavy field use, water and salt water submersion. What do you think of my choice: Bead-blasted 440c High Chromium Stainless Steel or (Tool) Steel, Nickel Silver Bolsters, Micarta Handle, Black Military Grade Waterproof Sheath.
No doubt you are very busy. If you have a chance to respond, your insight would be very appreciated.
J.

My response:

Hi, J. Thanks for writing.
The only difference in 440C and 440C tool steel blades would be that any steel called a tool steel has been hardened and tempered. I don't always call 440C a "tool" steel, but it is. Sometimes, I'll omit the word tool, but all my 440C blades have been hardened and tempered.
Most fine blade steels will withstand heavy use. Only a few stainless steels will resist corrosion of marine (salt water) environments, and in those, none will withstand long or continuous marine submersion, only periodic exposure followed by rinsing in clear water and drying. Most of my military clients who use knives in marine environments opt for 440C because of the high corrosion resistance, and after their missions, they throw the knives and sheaths in the rinse tank with their other gear. Longevity and service has been very good with these knives.
I would not recommend nickel silver; it is a white brass, and though it resists corrosion somewhat, 304 austenitic stainless steel would be corrosion free.
The price for a PJLT, bead blasted 440C stainless steel blade, 304 stainless steel bolsters, micarta phenolic handle, kydex, aluminum, and nickle plated steel tension sheath is $850.00. Prices go up from there depending on materials, finish, embellishment, and accessories.
Currently, my backlog is three years, but possibly sooner.
Thanks J.,
Jay

Top of Page

Hello Jay, it arrived on the 10th safe and sound. It is truly amazing! I cannot thank you enough for the amazing work you did bring this dagger to life for me. It is truly a work of art that I will cherish for years to come. It is amazing to say the least!! I was almost moved to tears with how perfectly you have brought the athame that I envisioned into reality for me. Thank you.

--R.N.


I was reminded of Miyamoto Musashi, and his lethal demonstrations with a wooden practice sword, having evolved to a point of not even needing an edged weapon...
There is a point when the art of human form and movement surpasses objects. Then, the objects themselves become an artistic expression of that form and motion.

Hello Jay,
I am just delving into knife making as a hobby. Your website is a treasure trove of valuable information that has been a great reference for me. Thank you for investing the time to share your expertise.

Regards,
Charlie Ward Wright IV


Mr. Fisher,
AMAZING work in the Pallene... that must be one of your best (if not the best) works of art you have ever created. You really demonstrate your superb skill in this one. From the blade shape, grind, hand engraving, polish; everything is just so perfect. Even the sheath and stand are superb by themselves. You must have put enormous effort and time to create the whole package.
Thank you for sharing this.

--H. R.


"Aegir" knife sculpture in mirror polished, hot blued O1 high carbon tungsten-vanadium alloy tool steel blade, blued steel bolsters, 14kt gold bezels, peridot gemstones, Nebula stone gemstone handle, stand of cast bronze, white Carribean coral, Venetian gold granite with garnets
More about Aegir

Howdy!
I'm an artist craftsman who is considering getting much more serious about knife making. I want to make knives that serve for a lifetime and longer. For a while I was having a hard time getting past people telling me that if I wasn't out there folding the steel I wasn't a true knife maker. I now realize that's like saying if i didn't make my own clay I'm not a sculptor.
Your site is one of the most informative sites out there on the web that I have come across, and by far the most informative on knife making. Thanks for all of the free information. To own one of your knives would be great, but every last dollar is going into equipment and steel for the moment. Someday though...
Thanks,
H. W.

My response:

Hello, H. Thanks for writing, and thanks for your kind words about my site and work.
You’re right; there are a lot of “purists” out there, who use a vague set of qualifications to push their own knives. Unfortunately, they often choose to ignore the simple needs of knife users: a knife design specific to their needs, well made, fitted, and finished, and of the highest quality materials, properly treated for durability.
Some people buy the image of a burly blacksmith standing behind the anvil with sparks flying on each blow, but most modern knife clients simply want the best made knife available for their use or collection.
Welcome to the world of knife making, I hope your journey is as fun as mine has been!
Thanks,
Jay

Top of Page

Jay,
It is exactly the way I pictured it in my head when I ordered it. Nice.

--S.


First and foremost, I am absolutely delighted with the Macha EL !! While indeed gargantuan in proportions, its lines, curves, and finish nonetheless convey (to me) a certain feeling of elegance and sophistication. Putting aside the sheath & accoutrements for a moment (which betray its true purpose), the knife itself is the sort of implement I might expect a proper English gentleman to carry while strolling through dangerous or uncertain environs. And, though I'm sure some hardcore warrior types may deem it incongruously decorous, I really love the file-work on this knife, as well as the mirror finish. The leg-strap at the base of the sheath was an excellent addition as well. And, as with the Imamu, the light, Mg firestarter, and honing device are invaluable additions.
The balance is excellent, the knife feels very light & maneuverable in the hand, despite its size, and the handle & quillon accommodate my hand-grip comfortably & securely. It really doesn't "feel" as though it weighs 18 ozs. I find the contrast between the design of this knife and the Imamu interesting - while both are designed for similar purposes, many aspects of their styles are radically different, almost at opposite ends of the spectrum. Certainly, both rate highly on the "intimidation scale" - believe me, I'm counting on this benefit in the interim until I can become properly trained in the defensive use of knives during an assault. The only thing that would save my bacon right now would be for a potential assailant to flee at the first sight of one of these knives (and with the presumption that he is not armed with a firearm - can't do much worse than to bring a knife to a gunfight, unless you're Bruce Lee or Chuck Norris.)

--G. L.


Mr. Fisher,
I have found the excerpt from your book very educational and I look forward to finding your up coming book in stores. Your web site is very educational thank you for sharing this information. It has inspired me to continue with my first knife project knife that I stared with at the request of my knife fighting Instructor on his design after I told him I was interested in going into designing blades for the Search and Recovery team that I am on. Both basic designs that I had were plain Jane till and neglected some little refinements that you mentioned in a good knife. I look forward to some time in the future purchasing one of you fine blades your use of natural materials is amazing.
Thank you for your time,
M. A.

My response:

Hello, M. Thanks for writing, and thanks for your kind words about my work, my site and my writing.
My first sold knife was made for the Master who ran my Kenpo Dojo. It was an Ed Parker knock-off, the father of modern American Karate. The martial arts are a great resource for knife design and interest.
I’m working on a bunch of SAR and CSAR knives right now, including one for a WMD SAR K9 professional. It’s always an honor to work with these pros; they offer great insight and ideas, and it’s neat to know the knives are used in the real world.
Thanks again for your interest,
Jay

Top of Page

Jay,
I received my knife a few days ago and I wanted to write you and tell you how pleased I am with the knife you created for me. Jay, ordering a knife from you is a journey! I can remember my first glance at your web sight, looking at all those beautiful, rugged, and inspiring knives you have created for your clients.
Then I began to read the copious amounts of information you have written about on so many topics related to a quality knife, and for that matter, lousy knives. I took a side road or two to research the information you write about on your site and I can say this: your information is accurate, your opinions are based on exceptional research, years of experience, and just plain good sense. And yes, I did research some of the topics you wrote about to test the information you provided. This took me many months, but it was well worth it to know that the individual I was going to do business knew what he was talking about, had proven experience, and applied his knowledge to his work. You do!
The next leg of my journey was to actually call and talk to you; that was intimidating, believe it or not. Thank you for putting me at ease and for taking the time away from your studio and works in progress to educate me, listen to my expectations, and to manage them so carefully.
Next thing I knew I was giving you my story. If you’ll recall, I told you about the hundreds of dollars I have spent over the last 20 years in purchasing knives that I though were of good or excellent quality, only to retire them to a plastic container in the garage filled with old knives that turned out to be a waste of money. You asked me what I was going to be using my knife for, under what conditions, and then you started mold a vision for me of what my knife would look like. I wanted a working knife, of exceptional form and function and a sheath that would hold my knife whether I was walking, running, climbing, or belly crawling through a variety of conditions. I wanted an edge that was sharp and strong, but able to touch up in the field. I often spent extended times in the field, so low maintenance was also a priority.
"Shank" 440C high chromium stainless tool steel blade, milled for light weight and utility, locking waterproof stainless steel, kydex, and aluminum sheath Well, Jay, you delivered!! I received my knife and when I opened it, I was elated! Not only did you meet my expectations, you exceeded them. I have a knife and sheath that was worth EVERY bit of what I paid for it. I will use it often with full confidence that it won’t let me down. Believe it or not, I cannot wait until the day I can hand it down to one of my kids. At first I felt my journey was over but after many times handling my knife, and proudly showing it off to others, I have a feeling another journey is in the making.
Jay, in this day and age of mass production, where we the consumer are often lied to and cheated through promises of good or even exceptional quality, it was fantastic to meet an ethical, honest business man who so carefully considers the needs and expectations of his customer as you do. I consider it an honor and a pleasure to have done business with you, and look forward to future contacts with you.

--Joe Jurewicz


Hello Mr. Fisher,
I just want to thank you a lot for writing your long detailed page on heat treating. After about 4 days of scrolling internet forums and such, your post laid it out the best. So relieved...!
Thank so much for your time... otherwise all the best!!

Sincerely,
Marc Stanton

Thank you again- like finding the holy grail of treating that cut through all the floating opinionated stuff.


A client sent me an article clipped from the New York Times about knife sharpening and the "legendary" skills of the Japanese in making blades and having a better cutting edge. It was the usual knife hype from a mass-market industry, and I evaluated and wrote:

Hi, B. Thanks for the article clipping. It’s interesting how little people actually know about the cutting edge. There is no mystique, no legendary knife style or quality necessary for a very sharp, very long lasting cutting edge. It’s simple really: the blade must be as thin as possible, and the sharpening angle as low as possible. There are other considerations, of course, being the type of steel, and the geometry of the grind, and the use of the knife.
Chef’s cutlery is ground as thin as is reasonably possible. In some ways, the chef’s knife is one of the toughest to make by hand, as I grind them incredibly thin. I also use a hollow grind, something you will seldom, if ever, see in a factory chef or kitchen knife. Factories flat grind the thin blades on automated machines, and though the flat grind is initially sharp, it will get much thicker with the first and successive sharpenings. I detail this on my Blades page in the geometry section.
When I got into knives, I looked for the ultimate resource on the cutting edge. What I found was a man who had made a living for over 35 years as a sharpening consultant to the textile and meat packing industry. Now, in industry, these guys don’t screw around. They don’t have time for confusing and mystical gimmicks, or hyperbole. They must have the sharpest cutting edges, for the longest time, with a technique that is clear, maintainable, and very sharp. If you’ve ever seen the “line” at a packing plant, it is an amazing thing- the people are whipping meat off the bone at an incredible pace! The knives are super-razor keen, and they wear special Kevlar or stainless steel cut-resistant gloves for protection from the blades. In textile plants, razor sharp wheels, shears, and blades cut through thousands of miles of materials, without snagging or tearing. This guy advised them on how to maintain their cutting edges. His name was John Juranich, and he wrote a good, short, concise book on what he knew. It’s called “Razor Edge Sharpening” and it’s available on his website (run by his family, I think).
They also sell gadgets on their site that help you maintain that sharpening angle, but I don’t recommend them on a custom knife, because they clamp on to the spine of the knife and can mar the finish. But the resource is worth it, and that’s why I recommend Juranich’s book on every knife care sheet I supply with every knife. I can’t live long enough to have the experience this man has had sharpening blades, so I use what he learned.
About the companies selling kitchen knives: these types of knives are a big volume business. They rely upon continuous sales in a pretty low end market. There is a heap of competition in what they do, so the only way they can be successful is by selling more units at a higher price than the competition. So, the industry relies upon an immense and embarrassing amount of hype. There are no “legendary” kitchen knives, anywhere in history, no matter what they say. Here’s a comparison: In the days of old, the musicians, jesters, actors, and entertainers were some of the lowest class, lowest paid, taking bones thrown from the King’s court as payment for their services. Today, they are hyped by our culture and media’s hunger for dollars to a point of absurd payment for their services, some have become “idols.” Is their talent really that precious? Or is it a twisted part of capitalism that has somehow skewed our values? The same can be said of kitchen knives. Kitchen knives are common, mostly cheap and every household has them, but somehow these companies try to hype the quality of their cheap knives for a greater return.
Here’s a prime example from the article: the difference of having a relief angle and edge on one side of the blade is not some great advantage to the end user of the knife, it’s one of savings in manufacturing! It’s cheaper and simpler to take a thin blade blank, put a relief angle only on one side, cut your machining expenses in half, and then hype it up as some great benefit. It makes no difference whether the compound angles come from one side or two, a low angle is possible with both methods, and thus, there is no sharper knife. What it says to me is that these Asian cutlery firms are competing with the dominant German firms for moderately priced kitchen cutlery, in a world where people are starting to realize that they don’t want a “Ginsu” kitchen knife sitting on the counter of their very expensive and important kitchen.
That’s where fine custom knives come in. Factories can’t even come close...
Jay

Top of Page

Jay,
The dagger is beautiful!

--L. B.


Hello Jay
Just sending a big thank you for all the info you have in your web site to read and to learn the ways of knife making. 3 years ago I sat down and saw your web site and it all started from there. I went down to the shed and started to have a go at this. I always wanted to make knives all my life. I grew up on a cane farm and played around with steel and welding making farm equipment and all sorts of stuff so it was a bit easy to have a go at knife making.
You inspired me and I regard you as a mentor for what i am doing. I live in Australia Queensland so it you ever get over this way look me up, and if I end up going over your way I will look you up to thank you personally.
I just do this for a hobby so its all fun. I would love to buy one of your knives its the ARCTICA MODEL. I should of got it when our dollar was at $1 US but it gone down to 80 cent US so that stuffed that idea. I add some photos of my knives i use 440C and 316 stainless steel and pins for the bolsters and dymond wood for for scales I'm starting to get into the Australian hard woods now one of my friends has a stabiliser so we are going to have a go at that. I dove tail the bolsters and scales it took me a lot of stuff ups to do this but I kept at it and got it pretty good now thanks to you.
If you do it its the best way. Doing the hollow grinds ok as well I ended up getting a radiusmaster there made in Australia a great machine I love it.
SO ALL THE BEST MATE AND AGAIN THANK YOU

Robert Grech


Let your speech be always with grace, seasoned with salt.

Colossians, iv, 6

They are beautiful. Thank you for the fine craftsmanship.

--P.


Mr. Fisher,
Unreal!!!! Wow is this knife beautiful. Thank you so much.
It's unreal how many different colors are in that handle. I kind of go lost in it last night!!!

--S. Y.


Recently you added a great page about food safety, it was fascinating lecture and you opened my eyes for some issues I was not thinking about before. Now, when I have a client asking about kitchen knives I direct him to read your page first before he chooses materials for his knife. You are also right that a legal regulation in this field will come sooner than later (surely in such regulation loving regions as USA and EU) and it would be good to be prepared.
Thank you for taking time to find and write all this information, it is great service for whole knife community.

--B. G.


I was searching your pages looking for a gift for a friend. The Durango was very catchy. I would like to find out a price for this knife and if you have this in stock or something maybe fairly close. Also, do you come to Tucson to the shows here any time ??
Thanks for your time,
S.C.

My response:

S.C.,
The Durango is a popular style, and I've made it in dozens of different handle materials. The price of a piece depends on the embellishment, handle material, blade finish, sheath or stand, engraving, etching, etc. Prices for the Durango start at $450 for an exotic hardwood or similar handle with brass fittings, and $650 for a gemstone handle with stainless fittings. I guarantee my workmanship and your satisfaction, if you receive the knife and don't love it, you don't buy it. My waiting period for new orders is six to 12 months due to my military knife orders.
I don't have anything in stock exactly like the Durango you highlighted, but I'll be posting some new models on my "for sale" page in the next few weeks. I can send you images, or we can discuss particulars through email. The only show I'm doing this year is the Knifemaker's Guild in Orlando in July, but if you're ever in NM, stop by!
Thank you,
Jay

This is an older email, please do not use the quoted prices. Also, I haven't done any shows in years!

Top of Page

Hi Jay,
My Pecos II arrived in pristine condition. This is absolutely a work of art and the pictures on the website will never be able to fully capture the essence of this knife. As I suspected, the only thing that I want to do with it is display it proudly on my wall for everyone to see and for me to keep it in the condition that it arrived in. I will take it out and handle it, I will polish and protect it and I will show everyone who comes over. Then I will put it back in its display case and threaten to kill anyone who leaves finger prints on it...
Really Jay, you do amazing work. Thank you for the patience that you show when I'm asking questions and the time that you take to add some personal notes in our email conversations. It makes me feel like I'm doing business with a friend and when you take the time to get to know your clients it makes the experience that much more enjoyable.
I'm looking forward to the next addition to my family...that one I intend to actually cut something with :)

--Danny Barrett


Jay,
I didn't think I would be as excited about this knife as I was Charax, BUT... I was wrong!
The lines, weight, balance of this knife are exceptional! I've been using it since I got it on Friday, didn't expect to see it until Monday. Both the balance and feel of this knife are just incredible. Stabbed my practice dummy a few times and this knife really excels! Stabbing, slashing and even "snakebite" defenses are effortless. Usually, I like a longer handle because of the size of my hands. However, the curves on the handle on this knife make for an unbelievably comfortable feel in my hand regardless of the grip technique.
In summary, I am VERY impressed. It's quality and attention to detail such as this that has made me a return customer! I look forward to seeing the "Raptor".
Thanks again, Jay!

--A.

P.S. By the way, the basket weave sheath is exceptional in quality. You are a true artisan!


Jay,
Just visited your site and am looking for a dagger, having never owned one my first thought was Damascus but with financial reality it may not happen, my husband and I were particularly found of your Venus dagger, and would be interested in knowing how much it would be in a Damascus as well as the other possibility's.
Thank You
K. & B. F.

My response:

The price of the Venus dagger depends upon many things, as I make it in several different sizes and with different materials, embellishments, finishes, etc. A small dagger with clean lines will run about $300, medium sizes in the range of 600-1000, full embellished gemstone pieces on stands may run from 1500 on up. Are we still talking?
Jay

Her response:

Yes I believe we may still be talking.....was thinking something round about a 5" blade. Still stuck on the Damascus but would be open to any suggestions you might have. Having never owned a dagger myself am looking for something to go with a formal gown I have (Renaissance type). My husband is a member of the E. Clampus Vitus organization and felt this style would make a nice touch to the gown. Still listening, look forward to hearing from you soon.
K. & B. F.

My response:

A 5" Damascus blade would be a bit of an investment, probably 700-800 minimum, not including embellishment. The other problem is care and longevity. Good, bold patterns in pattern welded carbon steels are achieved by alternating layers of high and low carbon tool steels, steels that can be blued. Therefore, they can also rust. Just a little moisture left on this type of blade creates rust, and residing in a leather sheath can quickly rust the blade when moisture levels are only moderate. The third factor is strength, realizing that each layer boundary is a weld, and welds create stresses in the structure (but I know you're not too worried about that, right?). Of course, you can go with stainless Damascus, but that's more expensive.
For appearance, nothing beats 440C high chromium stainless die steel. It is hard, tough, finishes exquisitely, requires almost no care, maintains a high finish and is durable, and ridiculously easy to clean. This steel is the choice of military combat knife users, as well as police, bomb techs, SWAT teams, divers, and sailors. It is also the steel I use in all those beautiful art sculptures on my web site, on all the swords, and on the blade of my Partizan that is in the Tower of London.
Some collectors are even going to mirror finished hot blued blades, which can be jet black, cobalt blue, vermilion spotted, or straw gold, but these are simply oxidation processes that retard corrosion and can eventually wear off. I do those, too.
So, K., that might be more information than you require, so I'll hem it in some: I can make a 5" bladed dagger with hidden or full tang, high chromium mirror finished stainless steel, with a wooden or organic handle for $500, with a gemstone handle for $600. This would include a leather sheath. Embellishment: etching, engraving, lettering, mosaics, sheath finework, etc. would be extra.
How's that?
Jay

Please note that this is an older email and the quote does not reflect current prices!

Top of Page

Jay,
Wow, what do I think? This thing is beautiful and well worth the wait. Showed it to a coworker and now he’s thinking about adding his name to your knife queue. This knife now has me torn because it’s more like a piece of art. When I ordered it my intention was for it to actually be used, but now I’m not so sure about that. The look of the mirror finish, the weight and feel is just awesome. The locking kydex sheath is again awesome, very sturdy and ingenious design.
Thanks again for a very functional yet decorative knife, I couldn’t be happier. I just may have to order another...

--A. S.


Jay,
The Mercator looks great. It flows really beautifully.

--J.


Jay,
Finally got to see and hold the knife in person. It is Amazing!!  It is astonishing how you can take someone's ideas and thoughts and bring it to life. It feels good in the hand and I'm sure it's going to fit every need I have. The engraving is nothing but a thing of beauty.  I truly feel this is a piece of art, not a tool. Thank you. This is something I hope to pass down from generation to generation.

--S. E.


"Acamar" obverse side view in CPMS30V high vanadium stainless tool steel blade, 304 stainless steel bolsters, red-black canvas micarta phenolic handle, black basketweave leather sheath
More about this Acamar

Hello Jay,
See the attached note from down under. The Acamar knife has been delivered to my friend and he is thrilled:


Gidday K.
Beautiful! I reckon the Acamar is the perfect hunting knife for NZ game, unless you are in to sticking pigs…. Which I am not. It is truly just beautiful, I am totally thrilled with it, it is just such a step up from the old Gerber or Kershaw which I have had in the past. The detail is incredible and even the sheath is a work of art, the only problem is I’ll be so keen to pull it out when hunting I’ll wind up doing all the gutting & skinning for everyone! The blade is terrific and the whole knife is superbly balanced and weighted, it is not so large that it gets in the way when on the belt, it is just perfect, thank you so much!!

Cherio,
T.


Dear Jay:
Yesterday I came home after a long day at work and was pleasantly surprised to see a box from you. That was fast, efficient service! When I opened the box I was blown away. Your knife was everything you said and more. It was not only beautifully made, comfortable to hold, magnificent to look at and sharp enough to cut a whisper, it was also well balanced and unlike most fine artwork which you are terrified to touch for fear that you might damage it, totally tangible. There is nothing like steel and stone for a combination. It feels better than any other knife I own and I have knives from many other great masters, Ray Beers, Reese Weiland and many more. I am not disparaging their work, they are masters and I will never trade or sell their work, but your knife gave me a totally different feeling. I have decided to try to buy one to two of your knives exclusively for the next couple years (depending on what I can talk you into).

--D.K.


A detailed response to an inquiry:

Hello, Mr. R. Thanks for writing, and taking the time to investigate my site and my work.
Yes, I do make handles out of other plastic materials. I have used and am using G10, nylon, delrin, and vulcanized fiber, as well as Micarta. I haven't used "soft" grips like Kraton, because, I believe, it has to be molded onto the knife, and flexibility might lead to durability problems. Not many of my clients ask for that type of handle, either.
The serrations question you answered in a later email. I have several types of rip teeth, all very sharp and very thin. When I started making knives for the military, they requested teeth that work, that is: teeth that will cut, tear, and rip even if broken off. So I developed several different styles to accommodate directional cutting, cutting hardwoods, textiles, and bone.
About shiny blades: somewhere on my site (it's so large even I get lost sometimes!), I explain that military clients that carry mirror finished blades into combat are spraying them with camo paint, sheaths and all, then washing it off with lacquer thinner when they return from their tour. This way they've protected the finish somewhat, and had something very nice to hang on their wall afterwards, eventually to hand down to their children. At present, I do not coat blades  myself, because that would hide the grinds, hide any potential flaws, and chip and peel, eventually.
I'll go on to answer here a question on your second email, about bluing. Bluing is a process of oxidizing ("rust" is a form of oxidation, uncontrolled and irregular). Hot bluing (which is what I do) is a controlled, deep passive oxidation process whereby the steel is cleaned thoroughly, chemically  and molecularly, then immersed in a superheated boiling solution of sodium nitrate and other salts, for 40 minutes or longer. This oxidizes the first several thousandths of an inch of the steel surface, which is a very deep penetration. The bluing process is the same used on all fine firearms, that black dark look that takes years to buff, scrape, or polish off. My process excels in penetration, where most firearms might be blued for 10-20 minutes, I start at 40. To give you an illustration, when I cut my makers mark into a blued blade using a diamond point engraver at 50 pounds per square inch, it takes three full passes to cut through the bluing to achieve a bright cut! To sum, hot caustic bluing is a well-recognized, time-proven method of inhibiting corrosion (not eliminating it) on the surface of steels. My own son (in the 101st Airborne) carries a hot blued skeletonized knife in combat in Iraq. So do his buds. They're very happy with the performance.
That being said, please remember, there is NO corrosion proof tool steel. Even 440C, which contains 17% chromium will rust and corrode in salts or acidic environments. Please look at my "Care of Your Custom Military Knife" page on my website.
About the solid metal butt cap: There are several options, on a full tang knife, which is the strongest design, a supplemental bolster can be attached that will accomplish your objective. Extra care can be taken to attach it rigidly and permanently. The other option is a hidden tang knife, where the pommel is a butt cap, but it is not as physically strong. A third option is to mill the entire knife and fittings in one piece, but this is not cost effective, as the steel alone will cost several hundred dollars, and labor will add several hundred more to the base price, getting the knife well over a thousand to start with!
Jay

Top of Page

Jay,
The sheath compliments the dagger perfectly.

--J.


It's awesome, thank you very much.

--T.


The knife just arrived oddly as I was about to track the location of it!! It is beautiful and professionally packaged.
Thanks Jay!!!

--S.


The weapon does not the warrior make.

Hello, Jay!
Received the art on Saturday and find it perfect in every detail! It's worth every penny!

--P.


Hello Mr. Fisher,
Everyone says the same thing, "That's not a knife, it's art work" People like the sheath as much as the knife!!!
Very happy with it.
Thank You,

--S.


Hi Jay,
I received the Skeg and it is absolutely beautiful.  Thank you again for creating another amazing blade and the accompanying accessories.

Cheers,
K.


From a forum posting:

I happened to see your work last night and decided to look at your website. I cost me 3 hours of my life, and I only scratched the surface! :) As a professional chef, I was enthralled by your chef's knives and your curved knife block is just an amazing piece of art. I showed my wife the knife I liked and she said "buy it if you want it, it is beautiful". I may well be in touch before Christmas.
I used to do tumble-stone lapidary jewelry and always wanted a diamond saw, but at 22 years of age couldn't afford it.
--A.

My response:

Hi, A. Thanks for posting. And thanks for taking the time to look at my site. I hope it was informative. I spend a heck of a lot of time there myself!
Professional chef's knives are picking up momentum in the industry. I think that is because as factory prices keep going up, and the factory knives essentially stay the same, people are beginning to question why they would pay so much for the same junky knives, when they could spend a little more and have a knife (or set) that would last them for generations, something extremely well made and beautiful. Consequently, I have several custom order projects on the bench right now, sets and individual knives for the chef. Look for them to be posted there before Christmas.
Right now, my orders are running from 6 to 10 months. I guess that is a client's biggest complaint, but as the work becomes more popular, that is how it should be. I've heard of makers who have a 7 year waiting list, and other makers who just make what they want and then a potential client would have to get on a list to be called when the knife comes up for sale! So I guess my lead time is not too bad...
Lapidary work is cool. Not too many people have the patience for it, as you probably have discovered. Working up a piece of stone is a whole lot different than working with steel, wood, or antler.
--Jay

Top of Page

Jay,
All I can say is WOW! The knife look awesome. Once again, you have exceeded my expectations. Many thanks.

--T.


I normally don't take time to do this, but your knives are the most spectacular creations I have ever seen, you are a true visionary and artist. I doubt if i could ever afford one of your creations but I did want to take a minute to tell you what I think of them. Thanks for doing what you do, its incredible!!
Have a Great Night

Scott


Mr. Fisher,
I have been learning to make knives for three years and the detailed information you provide, for free, on your website is extremely helpful.  The volume of information is almost overwhelming, so I am constantly revisiting your website to see what I missed from the last time.  I am grateful that you take the time to maintain a huge website in addition to the works of art you create.
It was exhausting and hilarious to read the emails you have received in the past.  I can't believe you get these by the hundreds and thousands.  By you posting those emails and your comments, I am able to learn from other people's mistakes and they show me what I can expect if I ever endeavor to turn knife making into more than just a hobby.  In those emails, I am also able to learn the characteristics of a high quality knife and what I should strive for in my own efforts.
Again, thank you for sharing so much information.

Respectfully,
Robert
San Antonio, TX


My name is J., I'm an honorary member of the Knifemakers Guild and a collector for many years. I own two of your fine knives and am looking to add a few more to my collection! Looking through your many blade styles, I came across several that really interested me.
The first is the Raptor Karambit with the red jasper handle. Here is the link:
How much would it be for you to make this for me like it is in the picture? I would like the blade sharp on top and bottom.
Second, I really love the Athane dagger just as it is. The link is http://jayfisher.com/_borders/Athane1.jpg
Can you give me prices on these two? Also, I saw that I could pay $100.00 a month layaway. I could more than likely actually pay more than that a month. Deals I've made with other makers consist usually of me paying $100.00 to $250.00 a week, which I don't mind. Also, does the layaway apply to knives already made on your site? I'm interested in the Ladron and the Mountain Creature...
One last question. I know you've made A LOT of knives, so I don't expect you to remember, but I mentioned I have two of your knives. One is a Mardi Gras Dagger with purple Mexican agate and nickel silver bolsters. I bought it from a friend in 1999. He had it at least 5 years before that, probably a lot longer. What do you value this knife at? Also I have a Honduran rosewood skinner/hunter type knife with nickel silver bolsters / pins and filework on the spine of the tang and blade. Again, the knife was most likely made in the early 90s / late 80s. Can you give me a value of this... Okay, hope you have time to read all that! I'll await your reply!
Thank-you so much for your time!
~Sincerely,
J. C.

My response:

Hi J. Thanks for writing. Sorry for the delayed response, I've been at the Knifemakers Guild show and been on the road for the last week.
The Raptor is suddenly a popular knife and a fine choice. Blade magazine asked for the picture you're looking at and some more info, so they'll hopefully be featuring it soon. The Raptor pictured is $1200.00 The price includes full bolster engraving, full filework, a gemstone handle, and an exotic inlaid sheath. It is doubled edged, with a taper grind and hollow grind. The price may be adjusted if other options are suitable, such as hardwood, ivory, or bone handle, a different sheath, etc. The actual knife in the picture belongs to a fellow in the DEA, and I'll be building several more in the next few weeks for custom orders.
The Athane you refer to is currently in Japan. It is a beautiful knife, with segmented gemstone handle, wire wrapped and fluted, and rests in a full wooden case. One similar would cost from 1800.00 to 2800.00, depending on gemstone type, fluting, precious metals, guard and pommel work and type, and stand, sheath or case. The actual knife pictured was 2400.00, including the case (not pictured).
You are correct that on my website I state that I accept layaways, but only on custom orders. The knives already completed can sell suddenly, so I don't offer layaway on those. Both the knives: Ladron and Mountain Creature are very popular so I don't expect those to last long. Most people will use a credit card if they don't have the full price on hand, and I do accept most credit cards, so please let me know if you're interested.
About your "JaFisher-Quality Custom Knives," you are right, I've made a lot and I can't clearly identify the knives you've mentioned. Right now, I believe I've made close to 1500 knives in the last 25 years, so I would need a picture to tell you more info about them. Can you snap a quick photo and email it? I might have more info for you.
Let me know if you'd like me to build a "Raptor" for you. I can put it in the next batch!
Thanks,
Jay

Please note that I do not appraise or assign value on any of my knives. Read about this topic on my Business of Knifemaking page at this link.

Top of Page

Jay,
I bought the small Nihal with the jasper handle and my name engraved on the blade. My purpose for the knife was as a deer cleaning blade for internal work where a larger hunting knife just doesn’t work very well. I am pleased to report that this fine example of your art is exactly what I needed. It is incredibly sharp and even bone doesn’t dull the blade. When not in use in the field it sits on my desk as a letter opener. It is one of the finer possessions a man can treasure for his lifetime and then pass on to many future generations…knowing they will treasure it equally as well.
Thank You,

--J. Karnes


Hi Jay,
Just had to say thanks a ton for all the great info on heat treating and cryogenic treating of knives. I'm a novice to knives but an analyst by trade, so I appreciate that level of detail to learn more about the process. The more I learn, the more I appreciate all that goes into the art and science of knifemaking.

--E. B.


A client set me a "news release" about a new knife company, who's supposedly found a way to treat the surface and cutting edge of D2 by "friction forging" (hey I do that all the time, it's called knife grinding). This is supposed to be the biggest breakthrough of knives in 40 years. This is such typical hype, and I responded about the article:

Hi, Joe.
Yes, this one gave me a few smiles. It was pretty long, and seems to me to be typical factory hype.
Differential tempering is nothing new (it's not differential hardening, as the text stated). The ancient Japanese did this a lot, and in the last few years it's been very popular with the forged knife crowd. Does it make a "better" blade? That's not something you can verify one way or another. Many great tool steels are out there that are both hard and tough, wear resistant and shock resistant without differential tempering. They typically cannot be forged though, and that is why you see so many blades with hamon lines that are made of lower quality carbon steels.
D2 is a high quality tool steel though, and if these guys really found a way to produce a superior hardness at any location on the surface, you'd see the treatment being done to ball bearings, industrial tools, and used in the military industrial complex, not on simple $300 knives. Since this new "discovery" is not sweeping the metallurgical industrial complex, I'd have to guess that it's just hype.
Additionally, the knife has to be sharpened, and when that happens, any surface treatment will be ground away. I don't care how deep the penetration of this treatment is, sooner or later, it will be ground away.
The ad does everything I talk about on the site: using the name of a well-known custom knife maker, cutting rope as some sort of test of usability, hyping some indistinguishable feature of the steel instead of the geometry, fittings, fit, finish, handle, or sheath. And saying that the D2 "withstands " corrosion is vague at best. D2 will easily corrode, just leave some orange juice, blood, or salt water on the surface and watch.
Joe, it's sad that this stuff goes on. One interesting thing is the attempt to push these low end knives above the $300 range, high for any factory knife. I'm guessing that within five years, we'll see a factory knife like this in the $500 range, and people will still be selling the hype.
That's alright I suppose, I'll just have to keep raising my prices too!
Oh, if you really want a laugh, look at the C****** A***** Trade Research Association site. It' full of total factory bunk and hype, including statements like "hollow grinding is cheaper to produce than flat grinding." Yeah, that's why you see so many cheap kitchen knives hollow ground... The site is nothing more than the sales site for a very overpriced mechanical sharpening machine for factory knives. So it's blatant misrepresentation all around!
Why is so much time spend on excuses, hype, dodging, and bull, instead of making a really fine product in America? I'd like to see any one of these people make a knife, instead of pile on misinformation.
Thanks,
Jay

Top of Page

Hi Jay.
Received the knife today and to say that it is magnificent is an understatement. Everywhere I look there are examples of craftsmanship from the fine filework to the dovetailing of the bolsters. The hollow grinds are perfect and the balance and weight of the knife is also perfect.
I am pleased that that I stepped back from the detail so that you could add your magic to the package. I am looking at the knife as I type and admiring how the sheath follows the engraving detail on the bolsters...

--S.W.


We are what we repeatedly do. Excellence then, is not an act, but a habit.

--Aristotle

Jay,
Once again your skills and craftsmanship in knife making have yielded another wonderment of our Earth's minerals, PHOBOS! It is not only a most beautiful Jay Fisher knife, but its edge, balance and form make it a fearful weapon. Many thanks for giving me the chance to own it.

--D.T.


I love it Jay. It looks too chic but also too rough!! I don¹t know if I should use it or just save it :) Thank you for a great job.

Best,
A.


"Mariner" Sailor's Knife with "Seahawk" marlinspike, obverse side view in 440C high chromium martensitic stainless steel blade, T3 cyrogenic treatment, 304 stainless steel bolsters, Stone Canyon Jasper gemstone handle, hand-carved leather sheath inlaid with shark skin
More about this Mariner

Hi Jay,
I opened and held Phact this Christmas morning, and . . . WOW.  I want to write you a proper thank you and detailed impressions of this beautiful piece, but right now I'm a little brain dead after all the holiday festivities, family visiting, and kids running on a 12 hour sugar high.  Let me just say thank you for your masterful work on Phact and for brightening my Christmas!
God Bless and Merry Christmas to you and your family,

--A.


Dear Jay,
I would be interested in ordering a knife. The pinon was the only one I saw on the web site and I found it very appealing, but would certainly be interested in your other models. I am looking for something "fancy", but not overly so. Please let me know the next step.
Thanks,
G.H.

My response:

G.,
The next step is twofold. Size and price. Determine how much you want to budget for the piece, and what general size. Then we can discuss patterns, options, etc.
--Jay

Top of Page

Much better in life than in the picture. Great Balance and a Fantastic double edge blade. It has a fabulous handle and sheath.
The Black nephrite is superb. The knife is authoritative and expresses strength and dignity.
Thanks,
B.


"Nunavut" custom skinning knife, obverse side view in 440C high chromium stainless steel blade, hand-engraved 304 stainless steel bolsters, Musk Ox boss horn handle, hand-tooled leather sheath
More about this Nunavut

Hello Jay,
What a thrill it was to tear open your package today. The wait was definitely worth it. Your knife is astonishingly beautiful, it's incredible. The mirror finish, the perfectly executed file work, the richly engraved bolsters, exquisite translucent Muskox boss handle and gorgeous hand tooled holster are a vision to behold. This is a treasure we will prize always. It will be coming along on our hunting trips.
Thank you very much!

M.


Hi Jay,
I hope you and yours are doing well. :)
It has been a few years since I received Tharsis Intense. I just wanted to reach out to let you know that the knife continues to inspire me. To own such a treasure is a real privilege. Thank you!

Cheers,
A.


Mr Fisher:
My name is M. R. I saw a model on your website that caught my eye. Attached is the picture that I saw. I'm happy with the knife and its holder. I love the pattern of the bolsters. However, I would prefer either a less 'busy' pattern on the handle, or the same pattern with less color contrasts, preferably in shades of dark red (carmine, maroon, crimson). I also would like to personalize somehow my knife, maybe engraving my initials or name.
Do you think this is tacky or not a good idea for any reason?. Anyway, I gotta tell you that while I'm not a knife-making expert or anything remotely close, I do appreciate and recognize beauty and quality when I see it, and going through your website has been a delight.
Hope to hear from you soon
M.

My response:

Hello, M. Thanks for writing and thanks for your kind words about my work.
The Wasat you described is an elegant knife, with a trailing point and light handle contours. The Stromatolite gemstone handle would make a beautiful version of this knife.
Personalization is an individual decision. While it can make a knife unique and identifiable, it also limits or even prevents resale on the knife market. If a knife is purchased for investment value alone, the knife is rarely personalized. If it is intended to stay in the family (as most of these knives outlast their original owners), then the owner sometimes prefers the custom personalization for conventional family heirloom identification.
A Wasat with a mirror finished blued O-1 high chromium tungsten-vanadium tool steel blade, hand-engraved 304 stainless steel bolsters, and a red Fossilized Stromatolite Algae gemstone handle with exotic inlays in a leather sheath would quote at $2295.00.
Due to a long order list and high interest, delivery times for new orders are quoting at 48 months, but possibly sooner.
M., please let me know if you're interested in this or any other fine custom handmade knife.
Thanks again,
Jay

Top of Page

Jay,
As of yet no premonition has revealed the mystical powers bestowed to her but Wayland himself must have placed his hands upon your shoulders as he smiled with delight. Beautiful she is and trusted companion she'll become one truly for the ages. From the first and I hope not the last email to you your customer service and attentiveness has been nothing less than first class, something retail and Big Box stores no longer offer. Another reason too buy a Jay Fisher knife!
Thank you for accepting the commission of my first custom knife, I now know I made the right choice.

--Robert Ziliox


Hi, Jay,
The knife finally arrived yesterday! All I can say is it was worth the long wait. The knife is really a work of art!
Thank you and Merry Christmas!

--O.


Jay,
I've emailed you in the past w/ questions and you've been quite helpful. Again, your site is excellent and I've learned much from it. I was wondering if you might know anything about 1.4116 stainless steel. I can't find any specific information about this alloys qualities, only sites that are selling knives made with this metal come up. Thank you for your past help and any help you can offer here.
--W.W.

My response:

Hi, W.
1.4116 stainless steel is a low carbon stainless steel, a very poor steel for knives indeed. The cheapest, most often sold mass-produced kitchen and steak knives are usually made of 420 series stainless steels. The 1.4116 stainless rates only slightly better, with a small amount of vanadium for wear resistance. In my opinion, W, this type of steel is only used on very cheap knives not expected to perform well.
Jay

Top of Page

Hello, Jay.
I have received the knife today. It looks great. I really like the look of it. I think it looks at least as good as Anzu. I'm surprised that you have sent the knife already.
Thank you,

--J.


Jay,
A simply beautiful knife! Almost scared to wear it!! I’ll be proud to pass this to my son, one day!!
Thanks again for your fine work! I couldn’t be happier!

--J.


Hi Jay,
I just got to my office and, YOWZA!!  What a beautiful knife and work of art.  Sadly, I never bond with my knives completely 'till I use them, which means your beautiful artwork may get scuffed and scratched a little, but as the most incredible knife I have ever held, it is BEGGING me to put it to work!  What a dilemma.  Anyway, I promise to treat it right.
Please keep me in mind if any of your other creations become available.

K. S.


One pound of learning requires ten pounds of common sense to to apply it.

Persian proverb

Jay
Love its balance, heft, authority. The etching is great- what detail- the claws!

B. M.


Hi Jay,
I just wanted to take a moment to compliment you on your site.  You make some very beautiful knives.  I have recently started making my own, and I am learning from many sources.  I have used some of your knives as inspiration in some of my designs.
I am not anywhere near the level were I could start selling them, but would like to be someday.  My primary hobby is woodworking, but I am a knife lover and recently started.
I am active duty military (US), and currently stationed in Germany.  I have been in 21 years, so I will be looking to retire soon.  I would love to be able to do woodworking/knifemaking to put food on the table, but I am still a long way from that!
Anyway, just wanted to drop you a line to say I like your work.  I have it bookmarked as a 'favorite' so I can see if you do any updates.
Take care,

B.


Hello Mr. Fisher,
I have been looking for someone to craft a custom dagger for me for some time. After reviewing your site and seeing your work I have become interested in seeing if this is a project you have time for. I am looking for a dagger of approx. 16 inches in length. Double edged damascus steel. The handle I would like to be made of either African black wood or bog oak. I would prefer it the handle be black or as dark brown as possible. I have attached both a drawing of the blade shape I would like as well as a example of a cross guard I like. I have read your site and know that you do not copy another's work, I respect that. The example is simply meant as an illustration of what I am looking for. I would like the design to be smooth simply and elegant. Thank for your time.
Sincerely,
R. N.

My response:

Hello, R. Thanks for writing.
I don’t know if my work would fit in your time frame, as new orders are taking about 36 months, due to high order volume. Currently, I have over 100 fine knife projects on the bench.
Damascus daggers of the size and quality that you’ve described are starting at about $5000, and go up from there depending on materials, finish, embellishment, and accessories.
Please let me know if you’re interested, and if I can make this or any other fine custom knife for you.
Thanks R.,
Jay

Top of Page

Dear Jay:
Perfect! And that is all I’ll say. I could say perfectly balanced, magnificent, beautiful, incredible file work, professionally executed, flawlessly finished masterpiece with the most beautiful handle I have ever seen on any knife period – but I think I will just stick with Perfect!

--D.


Hi Jay
This knife is awesome. Definitely a "post-apocalypse" weapon (LOL). I wish I could carry it every day, but I don't think the NJ police would appreciate that.

--T.


Jay, I am ready to get you started. I had a question on what I might expect from the 0-1 blade. Most of my recent experience is with 'stainless' blades-ATS-34, AUS-8, and VG-10. Recently, I have used S30V, and that seems to be my favorite thus far. I have used D2, but don't remember much about it. I seem to recall that D2 has molybdenum in it, and 0-1 has tungsten.; Correct? Conceivably, in a not-so-human world, I might expect the 0-1 to be a better piercer, and the D2 to be a better pryer -am I on the right track? What are your thoughts?
John

My response:

Hi, John.
There are many differences in each steel you list. Even the steels by designation are different.
Start with S30V. This very may well be different than CPMS30V, which is crucible particle metallurgy steel, sintered and formed as powder into a billet or bar. This is what I use. The "S30V" slang may be a shortened term, but I suspect it has also been used erroneously to bring other steels under the blanket of the Crucible Particle Metallurgy tool steel's reputation.
CPMS30V has very high vanadium. Vanadium during heat treat forms vanadium carbides in the matrix, and they are some of the most wear resistant carbides. So CPMS30V’s claim to fame is great wear resistance when properly hardened and tempered. It can be so wear resistant that it is difficult to field sharpen. CPMS30V is also a stainless steel, so resist corrosion better than many other steels. Unfortunately, it can not be mirror finished, so must be left sanded, bead blasted, or rough, which can actually accelerate corrosion! I know … this can get confusing.
O-1 is a cold work tool steel, and I use a version that is a high tungsten-vanadium tool steel. So, when heat treated, it forms tungsten carbides and vanadium carbides in the matrix. Both are wear resistant, but overall, O-1 is much easier to sharpen in the field. This can be important on excursions, military or civilian. In the field, the O-1 can be honed to an incredibly keen edge, and many of my clients believe it can be made sharper than the stainless steels. I don’t think it’s actually sharper; it’s just that it can be more easily honed, whereas the stainless steels take much longer to hone up.
D2 is die steel created to make dies that press and form and cut other metals. It has the highest carbon content of any tool steel, about 1.65%. It also has high chromium, but not as much as most stainless steels, so it is not a true stainless. However, with the high carbon content and the increased chromium, it forms chromium carbides in the matrix and they are very hard and wear resistant. D2 can be made extremely hard, tough, and wear resistant. It is very expensive steel, nearly impossible to sharpen in the field, and long lasting. But it can corrode and discolor. It is also very expensive. I only recommend it on extreme use knives.
Now in everything I’ve said, I haven’t mentioned prying or piercing. First, I don’t recommend any knives to pry. Knife blades are hardened and tempered pieces of tool steel, designed to cut. In order to use one to pry, it would have to be very thick and very tough, which means of a lower temper (hardness) which would defeat the whole reason for having a hardened knife blade. Though some light prying is expected, it should not be a factor in your choice. If you need to pry in your excursions, carry a Halligan tool or a spanner wrench. They are made of forged shock resisting steels, and are not hardened so they can not splinter or snap.
Piercing depends more on the shape of the point. The application of the force of the hand will be applied to a small cross sectional area of the blade at the point. The knifemaker must balance the type of steel, the cross sectional geometry, the hardness and temper, and the toughness of the steel choice to create a blade for piercing. The material being pierced or cut also plays a great role in knife performance. That is why combat knives for defensive tactics are thin, spiky and pointed, whereas CSAR knives have more blunted or tanto tips.
Okay, I’m going a bit long here. Please take a look at the steel comparison chart on my Blades page.

Top of Page

Hi Jay
Jay, the knife is superb....well worth the wait. I am very grateful that you have made this knife so brilliantly. Thank you for everything. Thank you again for supplying me with the best custom knife money can buy, it is truly outstanding. I will surely be placing an order for one of my own very soon.
Thanks for everything

--T.


Jay,
Received yesterday the package.....just love the feel of this tool creation you did!!!

--S.


Titled: You've got a fantastic website, Jay

Just a simple Thank You for the outstanding website you've put together and maintained. Beautiful knives. Great information.

--J. F.
Harrisburg, PA


"Trifid" obverse side view in 440C high chromium stainless steel blade, hand-engraved 304 stainless steel bolsters, Brecciated Jasper gemstone handle, Ostrich leg skin inlaid in hand-carved leather sheath
More about this Trifid

Hi Jay,
Thank you very much for the knife. I am still playing with the knife for the past few days. I am still floored at how handy it feels in both hands. I really am glad you made the low hanging belt loop, it works well for me.
Even though I'm not a PJ, I still plan to use this knife often on my outings. I just may have to get another knife soon . :) some day I hope to get a gemstone polished knife....

--E. H.


--And three and a half years later:

The Izar folder still looks just as gorgeous as the day I got it, and there's been no dropoff in performance.
We should all age so well!

--E.


Hi Jay,
I am writing regarding one of your custom knives. I am interested in the Triton. I see you have made it in both the blued, and polished steel. I particularly interested in the blued Triton.
1. Can you tell me how much it would be to order this knife? I remember it was on your site not long ago, but I hesitated too long, and now I can't remember the amount.
2. Additionally, how long would it take you to make this? I'm not in any particular hurry, but I was curious what to expect.
The Triton pictured has a beautiful red tiger-eye gem handle.
3. Would the cost be more or less the same with a jasper red river handle? I trust your judgment, however, regarding the handles, and the tiger-eye is very nice on the blued Triton.
4. All of your sheathes are lovely. This one in particular shows off the knife. I suppose you must prefer this sheath over others that don't require a snap. Do you have any thoughts about a sheath for the Triton that does not require a snap?
It has been a pleasure reading your site, and looking at all the incredible knives on display. The difficulty is choosing only one!
Thanks for the wealth of information you provided.
Yours,
R. P.

My response:

Hello, R. Thanks for writing.
The Triton is a great knife, and the owner of the particular model you mentioned is very happy with it. I’ll answer your questions in order.
1. The knife like the one shown would be $845.00
2. Right now, my orders are running 10-14 months, but sometimes sooner. I’m working on 75 knives right now, with the list growing longer daily. The good part is that it gives a client some time to save up for the purchase.
3. The cost of the knife would be the same with a Red River Jasper handle. I do have some of the jasper and could set some aside for your project.
4. Sheathing the Triton in a sheath designed without a snap might be difficult, but not impossible. The reason is that because of the curvature of the knife, the blade must be “rolled” out of and in to the sheath, or the cutting edges will slice the sheath. The strap makes it a little easier to execute the roll. No matter how the knife is sheathed, it takes some practice to insert and withdraw because of the curve and double razor sharp edges. The strap also shows off the handle material. A fully protective sheath could be made, but the action into and out of the sheath must be just right.
R., you don’t have to choose only one knife, just one to start with! Many of my clients are constantly building their collection over the years, and the knives continue to appreciate in value. Thanks for your kind words about my site, and let me know if you have any more questions.
Jay

Top of Page

Jay, what a truly incredible knife…!
Every knife I get from you is simply a pure work of art. People say that about the software I write but in my case it can’t be held in your hand, admired for the fine creative lines of the scroll work, hefted in the hand for the joy of fine balance you have achieved or passed among friends for the look of awe and admiration it evokes. You are a true master.

--Jerry M. Karnes
Houston, Texas


I got the knife. My personal reactions:
1. Whoa, bigger than I had imagined!
2. Filework: Ok, I see what you were doing with it now with the wing design. It photographed like crap but looks fine.
3. Jade: I really like it. Has a nice cool feel. It was absolutely the right choice for this knife.
4. Engraving: looks even bolder and better.
I'm quite happy with the knife. The engraving works better than I imagined, and the filework integrates nicely with it.

-C. S.


Got the knife and took a quick look before heading out of town. . .
Looks fantastic and I think my son will like it. 

Many thanks,
E. D. 


Jay,
My son graduated as a Pararescueman last weekend, and I gave him the knife. He is thrilled. 
Thanks again.

E. D.


Dear Mr. Jay Fisher:
I would like to find out the price of this custom knife concept I had created using your guidelines.
1. Blade Design - Kochel 19" blade made of Austenitic steel, or anything you might recommend better.
2. Handle Material - (gemstone) - "Nebula Stone", with your name etched into the stone if possible? if not possible then your name on the blade would be just as nice.
3. Embellishment - Tribal design on handle, and on blade's upper surface (dull side).
4. Knife stand to compliment the knives design maybe a nebula stone base or fused with a nice wood tone maybe?
I am a huge admirer of your craft, and it would bring great joy to my life to own one of your works of art.
I just pray that I can afford it. I hope to hear from you soon.

My response:

The Kochel is a very large knife, and bringing the blade to 19” classifies it as a sword. With high chromium stainless tool steel blade, gemstone handle, etching and/or engraving and a custom stand, the price for this piece would start at $9000.00, depending on exact materials used, finish, embellishment, and accessories. Current lead time is about 30 months. Please let me know if I can make this or any other fine custom knife for you.
Thanks,
Jay

Top of Page

Jay,
As I always knew from speaking and email correspondences, the knives are absolutely beautiful, and I'm very happy with them! As I mentioned early on, these blades will see actual field use; I'm sure it will be as impressive as well. ...I'll be in contact with you about a new project soon!
Thanks Jay.

D.


Hi Jay,
I emailed you a few months ago and we exchanged a few emails. Still absorbing a lot of info on the subject. Also ordered the book you recommended on your site for sharpening knives by John Juranitch and am very pleased with the results I am getting. He also explains how to sharpen hand plane blades and that has come in particularly handy as I used to make furniture for a living and still do a fair amount to supplement my income. I thought my hand planers were sharp, but they are now on another level. Your website is quite a resource!

--M. R.


It is better to be a beggar than ignorant; for a beggar only wants money, but an ignorant person wants humanity.

–Aristippus

Hey Jay,
Long time no talk. I thought it was long overdue to give you some feedback on the Anzu knife you were kind enough to sell me 7-8 months ago.
First off, wow. What an unbelievable weapon. From its razor's edge to the perfectly formed handle, it's the most impressive and useful tool I have ever bought...because before the Anzu I didn't even know what a real combat knife was. But now I can guarantee, it will be on my gear anytime I go overseas.
Second, I got some serious use out of it in the field just recently and that edge just keeps on cutting. It's still as keen as the day I unopened it. Every time I take it out of its sheath, there are always a few who look at it and ask where in the hell I got a knife like that. Actually seeing the difference between a real combat knife and those bendy POS knives from cold steel puts it into perspective.
Anyway, I am extremely happy with the knife and I apologize for not writing sooner. Take care Jay, and the best to you and yours.

Respectfully,
-Chris

P.S. I will be contacting you in the near future with a custom knife order if you are accepting them right now.


Received Aldebaran today, what a beautiful piece of work. It will be the jewel of my collection. You are a true craftsman, thank you.

--W. G.


Hello,
Hope you’re well. I am a 3D artist freelancer. I typically model spaceships and sci-fi stuff. Decided recently to try my hand at a dagger...which led me to your site while trying to view reference images.
All that to say...your work and pics are glorious. Fantastic work!! Thank you for letting the world look in on your glorious creations.

--T. H.


"Aldebaran" obverse side view in CPM154CM powder metal technology stainless tool steel blade, 304 stainless steel bolsters, Golden Midnight Agate gemstone handle, hand-carved leather sheath inlaid with ostrich leg skin
The striking "Aldebaran" with Golden Midnight Agate gemstone handle

Sir
Am a UK resident but travel for work can take me into difficult areas of the world in, support of military activity and I am looking to invest in a quality knife that can serve both as a working tool, as personal protection and item that I can pass on to my son … There is a very old saying where I come from which is applicable .. "if you can't fight, where a big hat" , which roughly translate to " If you look tough, there is a good chance that you will get left alone"..
I use a machete or a Kukri for vegetation and wood but need a sharp cutting tool that holds its edge. I have in the past used a bayonet from UK SA80 rifle, which I am ashamed to admits was the most worthless piece of junk that has been my misfortune to use. This item is used in Afghanistan and Iraq by British troops who have mostly has to buy their own primary cutting tool, a real disgrace
However, my demands are not theirs, thankfully. What has attracted me to your work is attention to the metallurgy, the finish and a sheath locking device. At the moment I am using a Wilkinson sword Dartmoor knife and a Finnish hidden tang laminated blade, but neither of which are what I want.
Rather than waste your time with a full price quote and page of options, if you could give me an indication of pricing for each of the listed knives I can then cost in if I can afford any "extras" and narrow down my choice. I also accept that craftsmanship takes time and costs, so am expecting to have to wait a couple of yrs. The only requirements I have are as listed, although I will be happy to take guidance.

  • Blade material 440c, blade length under 6 inches; the climates I operate in can have very humidity, so some corrosion resistance is always worth having.
  • Finish- Satin or Polished
  • Bird's eye Maple burl scales
  • Nickel Silver or polished brass bolsters
  • Top serrations or cut for use with fire stick
  • Locking and or leather sheath- would use the locking sheath for work and the leather for display

Blades that I am interested in are :
Mercator
Hooded warrior - is this available in a slightly smaller size?
Treaty maker
Creature
Last Chance, with out the blade serrations
Kapteyn
Kind regards,
S. W.

My response:

Hello, S. Thanks for writing.
I understand your concern for knives in the combat field, as our troops are not issued knives of any purposeful significance while in combat either, which is sad.
The only major change to your description would be the blade serrations on the top of the spine. I do not make knives with locking sheaths that have serrations on the spine, as the serrations would contact the stainless steel lock bar of the locking mechanism when the knife is withdrawn from or inserted in the sheath. This would destroy both components. So it has to be either a locking sheath and smooth spine, or serrations on the spine and a tension fit sheath.
Another consideration would be the bolster material; I’d suggest 304 stainless steel for the greatest corrosion resistance, as both brass and nickel silver can corrode to different degrees. Brass is fairly high maintenance.
The knives you’ve mentioned vary greatly in size, shape, profile and design, and prices would vary with the simplest design being the Last Chance. A Last Chance with a satin finished 440C stainless steel blade, 304 stainless steel bolsters, hardwood handle, and locking kydex, aluminum, and stainless steel sheath would quote at $1495.00.
Prices for the other knives would go up from there depending on the style and size, with the most expensive being the large Treatymaker. Since this is a double edged knife, it could not have the locking sheath for the same reasons stated above with spine serrations. Outfitted similarly to the Last Chance, and with a tension fit kydex and aluminum sheath, the Treatymaker would quote at $2895.00.
Any of the designs can be adjusted for size, and the actual final quote depends on materials, finish, embellishment, and accessories. Currently, delivery times are about 36 months.
Please let me know if I can make any of these knives for your tactical needs.
Thanks again,
Jay

Top of Page

Jay,
Thank you so much for the timely delivery of the Marfak Knife I ordered. The craftsmanship of this knife and sheath is exquisite. Your abilities as a custom knife maker are evident in every detail of this piece. I am sure that my Finnish friend will be very proud to own a Jay Fisher original. It should be in Finland by Friday. It is a pleasure to to see such fine work from a true artesian. It will be very hard to give this away as a gift. I am looking forward to my next purchase of one of your fine pieces.

--M. M.


Jay, the cleaver arrived late Friday and is exquisite.
I appreciate the descriptive plaque detailing some of the particulars of the blade and handle
I’m delighted.

D. H.


Jay,
My name is T. A. – I am currently serving with the ********** here in Baghdad, Iraq and will be here for the next 10 months. As you are aware, we are drawing down at a fairly significant rate and those of us left behind will becoming increasingly vulnerable again to attacks etc., This is my 3rd time out here and have had to rely on close in combat techniques in at least 3 situations in the last 45 days.
I currently have two knifes that I carry; however, recently saw a picture of this particular knife and was told that it was made my yourself. I am very interested in obtaining this variety of knife and or something similar.
First off – do you have this particular knife in stock or something similar/more expensive/custom? That you would have available to sell/ship immediately;
Secondly, if the answer is no I assume you have a waiting list for said knife and I would like to purchase one/get on the list etc. Again, the knife does not have to be that particular knife but something that will do the job out here. I do interviews, etc., and find myself often times in rooms where a knife might be your only chance/last and best chance of survival.
Thank you for your time and I will thoroughly read your web site in the coming days – from what I have seen it is quite impressive - glad you are an American.
My very best regards to you and your family
T. A.

My response:

T., I looked over our working inventory, and we have two PJLTs that we may be able to move in your direction. The quote on a standard tactical model of Beauchamp-Fisher PJLT in bead blasted 440C high chromium stainless steel blade, 304 stainless steel bolsters, micarta phenolic handle and tension fit kydex, aluminum, and nickel plated steel sheath is $875.00. Upgrade to a locking waterproof sheath with stainless components adds $300.00 to that quote.
Your thoughts?
Thanks again,
Jay

Top of Page

Outstanding!!!!!!!!!!!!!!!!!!

--T.


I just got the piece of art. The knife is bad ass. It cuts anything with very little effort. I work in building high end homes and your knife is one of the nicest workable art pieces that I have ever seen. Thank for the great knife; can't wait to see the others!

Thanks,
J.


Enthusiasts soon understand each other.

Edward Irving
18th century Scottish preacher


It's here!!! I absolutely love it!!!
Thank you so much.

--S.


The knife looks AWESOME! I love it.
THANK YOU SO MUCH!!!

--N.


Jay,
I have been drooling over your site for a while now; there are some absolutely beautiful knives. I am a college student, an avid outdoorsman, and a knife lover. Both of these traits were passed onto me by my father who spent lots of his younger years canoe-camping in Northern US/Southern Canada and told me these stories as we went camping together in the Adirondacks. I have owned a good amount of knives over the past few years, from different Swiss Army Knives, Kershaw, Leatherman multitools, Gerber, and I was looking into purchasing a Ka-bar from a friend works for Ka-bar's base company, Vector. I have had a fascination with knives ever seen I was young when I used to hold my father's trusted knife, The Stallion. He bought it from a knifemaker in Greece, and it has a beautiful hardwood handle and a great blade with 'Stallion' etched into blade. You can easily tell the difference between this knife and the knives that I have purchased from EMS and various other outdoor retailers.
I have immense respect for a single beautiful made tool that will last for years upon years. It seems like part of the culture nowadays is to make things that will work fine for a little while and then breakdown only to be thrown away and a new item purchased in replacement. And, thus, I am looking at purchasing a tool, an investment, and a work of art from you.
My need in a knife is related to my hobby of outdoor adventures. Longer backpacking outings, climbing, white water kayaking, and canoeing are a few of the things I enjoy. As my adventures take me to farther reaches of the globe, I would like to have a trusty friend that will be useful in many situations and not fail me. I need something that will be super reliable and will be able to be used in the worst case scenarios. I guess this would be in the category of survival knives or "field" knives, if you will.
I think the style that I am looking at will be the Creature. I would also like one of the kydex waterproof locking sheaths to go with it, simply because they are one of the coolest things I have seen.
As far as steel goes, after reading through the many pages on your website, it seems that 440-C will be a great choice for overall characteristics and price. For the handle I would like a nice natural hardwood. I like darker woods with straighter grains. African Blackwood likes nice, as does Honduran Rosewood. As far as bolsters go, I am not too picky, just something that looks nice with the handle.
Being a college student, I am not exactly wealthy, but, like I said, I see the value of a good investment. That being said, I would like to keep the price below $1000. So if any of the components that I have chosen will be especially $$$, then do not be afraid to recommend a cheaper substitute.
This was long winded, but thank you for taking time out of your clearly busy schedule. Once I get a quote response from you, I will decide whether I am ready to place an order.
Amici,
T. T.

My response:

Hi, T. Thanks for writing, and thanks for your interest.
For the knife you specified, I’m afraid I can’t make it within your budget. As you’ve detailed, the knife would start at $1500.00, and go up from there depending on exact materials used, finish, embellishment, and accessories. Even if you eliminated the locking sheath and went for a tension fit sheath, that would only drop the price $300.
Please keep me in mind for any of your knife interest.
Thanks,
Jay

Top of Page

"Kineau" in stainless steel damascus blade, hand-engraved 304 stainless steel bolsters, banded Jasper-Hematite gemstone handle, lizard skin inlaid in hand-carved leather sheath
More about this Kineau

Jay,
I received the knife and sheath at my parents. It is way beyond great looking. It is far more than what I expected. Thank you for making such a nice sheath for me. Unfortunately I didn't get to use the knife on any game this fall. The animals were there but just not where we were at the right time. Maybe next year. I did get my Oryx 3 weeks ago though.

--B.


Jay,
Well, Jay, now I’ve got a problem. I ordered the knife as a daily user, to carry with me always – my third hand. Now that I have it, I see it should be displayed on a shelf as a work of art!

When I saw your picture of the knife, my mouth dropped open. Now that I actually have it in my hands, the reality of it takes me to an even higher level. I am overwhelmed. What extraordinary quality and workmanship. And the balance... I don’t hold on to it, it clings to my hand, resting there as if it always belonged. You really put yourself into it. I’m speechless… but AWESOME (in a very loud voice) comes to mind. You truly are an artist and a knife your canvas. But, I am going to follow through and carry your artwork with me every day. A knife needs a hand to make it whole. It’ll be a good friend.

Let me give you some first impressions of specific aspects.
I read on your web about “balance”. Now I truly understand. Alegre is a knife with a little heft for its size, yet it’s so balanced in my hand. I also love how the handle belly, the upper arch on the top of the handle, the hawk bill quillon on the rear bolster and the quillon on the front bolster conform to the hand. The concave forward extension of the front bolster turned out well. Aesthetically it adds to the gentle forward sweep/curve of the knife. It also works well as the thumb rest. I wondered if the filing through the thumb rest would aggravate the thumb, but you don’t even notice it. I will be enable to place a lot of thumb pressure to the job.

The mirrored finish, what can I say -- thanks. It takes the knife up to a whole another level. I cannot imagine it without it now.

I’ll say it again; your signature in the blade is perfect. An artist signing his work.

The dovetailed gemstones and bolsters shout quality. The fit you are able to get throughout the knife is unbelievable.

The filing is awesome. (There is that word again.) I didn’t realty expect to get something that special. I love how it goes the total length of the spine to the grind termination. The thin triangular slice in the tip of the spine seems an extension of the filing; like the tip of an arrow. It is wonderful how the filing narrows down as it goes toward and through the rear bolster and yet you keep the pattern going. Then it slowly dissipates, as if through years of wear, at the front quillon.

Thanks for the filing in the choil. I didn’t expect that but I really wanted it. I think it adds so much to the style of the knife.

The sheath is amazing all in itself. The basket weave is perfect. It oozes quality but does not shout.

And then you threw in the extras. The museum display tag is a great idea. The CD of all your knives is appreciated. Thanks.

New Mexico…
You know when I found out I’d priced myself out of the original vision of the knife, I was a little depressed. But your insights were helpful and right on. I could not afford that much right now and I would have never used as a daily knife.
BUT... you still created a knife that reflects our wonderful state. Here is what I will see every time I look at it:

  • The gentle arching top/spine is a broad, expansive NM horizon. The forward sweeping concave front bolster, grind radius and tanto point further accent that.
  • The hawk bill rear quillon with its “eye” brings to mind NM wildlife.
  • The Polvadera jasper you chose is perfect, maybe even more than you realize. I love all the veins and various earth tones. The warm color of the nickel bolsters blend marvelously with the gems. There is a nice depth to the stones. You look into them. That adds a richness and mystery. They remind me of the geology in NM.
  • The left side gemstone, the one in your picture, has the red of a NM setting sun. When you turn it over there is the white of the NM snow topped mountain peaks. And then being an actual NM gemstone makes it really special. Here’s a toast to the Polvadera mountains.
  • And then, of course, the filling is the lightning (what a great name you chose) from our summer thunderstorms.

ALEGRE ! ! !

--Carveth Kramer
Taos, New Mexico


I must say as a knife aficionado, your site has been the most informative and detailed of any custom maker I have seen to date.
I'm a soldier currently serving with the Second "Dagger" Brigade of the 1st Infantry Division and I'm contacting several artists in regards to a tactical fixed blade that I can carry with me here in Iraq. Your tactical blades section is more than impressive. I've sent correspondence to Jim Siska, Reese Weiland and David Broadwell all of whom I admire for their artistry but when I came upon your site it occurred to me that utility is just as, if not more important than the aesthetic. I am taken with the lines you use in particular for the "Treatymaker", "Phobos", and "Kadi" blades and the "Triton" kerambit looks nothing short of deadly efficiency bound to a hand held work of art.
Ok, so here's what I'd like to know. How much would it cost for a Kadi or Treatymaker style blade of S30v or D2 with the unit insignia of "The Big Red One" worked into the design of the blade, either with engraving or embossed or a change to the shape of the base of the blade if that would even work? Lignum-Vitae handle material and the fittings of your choice (with unit insignia possibly worked into the fitting instead if that would work better). Let me know what you think and what you can do and approximate price range for a blade length between 7 and 9 inches.

My response:

Hello, B. Thanks for writing, and thanks for your kind words about my work and web site. More than anything, thanks for your service to our country.
For a general idea, a single edged combat knife in the 7-9” blade length in bead blasted CPMS30V or D2 with 304 stainless steel fittings, micarta handle, and a tension fit kydex, aluminum, and steel sheath would start at $1600 and go up from there, depending on design, materials, finish, embellishment, and accessories. I also do the locking sheaths and variations and mounting options.
B., the problem is that currently, new orders are taking 48 months, due to a great demand and backlog. I have two options that you might consider:
The first option is that I’m completing four new tactical knives (just finished the knives today and am starting sheaths tomorrow) that I will post for sale on the public part of the website. I don’t know if any of them would interest you; they are new designs.
Another option is that I’ve started a new program with my son-in-law, James Beauchamp. James has trained in knife making for several years directly under me, in my studio. In partnership, James has agreed to make standard tactical knives in collaboration with me in an effort to get these knives out to clients like you who have a critical tactical, response, or combat need of more immediate nature. The knives are the same design, style, and made the same way, to the same high quality standards as I do. Please remember that these Fisher-Beauchamp models are fully guaranteed for workmanship, under my name and studio, and are as well-made as if only my hands have made them. The only difference you will see as a client is the Fisher-Beauchamp maker’s mark, and a much shorter wait time (in the order of months, perhaps weeks). As this is a new program this year, I haven’t posted it on the website yet, but will in the near future. He’s already made and delivered knives for professional emergency response units and USAF Pararescuemen.
Please let me know if you’re interested, and thanks again for your service.
Jay

Top of Page

Hi, Jay.
My knife came yesterday and all I can say is Wow. This is easily the nicest knife that I have ever held. The design is well thought out down to the smallest details and is exactly what I was looking for. Very ergonomic, capable of just about anything I would need a knife for and a formidable weapon for self defense. The craftsmanship is Incredible. The symmetry of the blade and the fineness of the edge are magnificent. The mirror polish is just like looking in the mirror. And it has the kind of balance that makes it want to be in your hand. I really like both sheaths and your tactical sheaths is far nicer than any that I have seen. I could go on and on. I'm moving to 30 acres In Colorado in about 4 months so I wanted a nice knife to carry out there and this one got the job. I plan on keeping this knife until I'm old and giving it to a younger person in my family.
I feel like I got a very good deal from you as far as pricing, it could have cost much more and I would still have been happy. It is a privilege and honor to own this knife and I am deeply grateful to have been allowed to get it.
You will probably hear from me in a year or so and I will order a investment/display knife so that I have a mint condition piece from you as I am now a big fan of your work.
Thank you.
Sincerely,

M. D.


Jay,
I know you're swamped with more important emails, so not expecting anything in return. I just wanted to let you know that I recently binge watched all your YouTube videos and then poured through your heat treating/cryo discussion on your website, and enjoyed it all.
I was encouraged by your line about an "advanced book" in which you implied a further dissertation on a cryo processor that could be built. All I could say is that I'll keep an eye out for it! A cursory search for building one has not produced any viable sources, but I'll keep digging.
Thanks for the fantastic information!

Sincerely,
D. H.
(A knife maker with far less experience as you, but nonetheless the same aspirations)


Things don't turn up in this world until somebody turns them up.

--James A. Garfield
20th President
United States of America

This is a beautiful art piece that my son and I will be very proud to own.
Jay, thank you for showing what is possible for a man to accomplish.

--J.


Hi Jay,
Finally got my knife. I had to pay another $270 customs duty. But it was still worth it as this knife is a thing of beauty, it fell into my hand as it was made for me. The file work is fantastic and it is perfectly balanced. Looks magnificent and feels great when I hold it. Also the sheath is spectacular, you are a true master of this and I look forward to working with you closely in the future on custom models for my collection.
Thank you.

Best Regards,
--D.


Dear Jay Fisher..good Morning.
By all means please make Little Venus for me. If I need to put $100 down I can do that before you actually start work..why don't we work that out if necessary?
Thankful to be a patron to your great art..I am enthusiastic to be a "parity to your equation".
Let me know if you want to talk some more about this..I love talking about Jay Fisher knives. Haven't been able to convert anyone else, but after I have one of your knives for a visual aid I bet you get a lot of orders..I guess people are used to me exaggerating how great knives are! ha ha.
See you later..
J. O.

My response:

Hello, J.
Sounds great. It will be a sweet dagger. A fun project for me to make and a beautiful piece for you to own.
Thanks again, J., it's nice to meet you. I have many fine clients who are excited about my work, and I know they try to share their enthusiasm. Since it really is a rare world (this world of fine custom knives), all that many can offer is confused stares. If it's not mainstream, after all, what could be the appeal?
No worry though, you're in good company, and that group is growing all the time.
Thanks for your patronage and support. Please feel free to ask any questions at any time.
Thanks again,
Jay

Top of Page

Hi Jay,
The Bulldog, sheath and stand arrived safely and I am totally blown away. You have really outdone yourself. The whole ensemble is really a piece of fine art, and it occupies a place of honor on my credenza. I cannot get over your vision--how the stand cradles the knife and the sheath with just the right curvature and yet displays them both to maximum advantage. The knife itself is exceptional, as are all your works. The engraving is amazing, and the gemstone handle is breathtaking. The file work completes the package to perfection. Sometimes I just sit and look at it, which I suppose is an appropriate tribute to any fine piece of art or sculpture. Thank you once again for the opportunity of owning something so special.

--Dave Evans


Thank you, it is an amazing work of art and an incredible knife.  Outstanding!  Thanks again.

--K.


Thank you for everything you have taught me via your website. I try to follow your philosophy and guidance on every one that I make. I'm no Jay Fisher, but I'm getting better everyday. Thank you. No need to reply. I know you are busy.

--Kevin Zito


"Vulpecula" obverse side view in D2 extremely high carbon die steel blade, hand-engraved 304 stainless steel bolsters, Petrified Fern fossil gemstone handle, hand-carved leather sheath inlaid with rayskin
More about this Vulpecula

Jay!
Thanks for making the knife. The workmanship and artistry are superb as always and I am really starting to like the new trademark! Buying a knife is not as difficult as it may seem. You really only have three choices. You could buy a production knife at your local sporting goods / hardware store which would work fine until you had to sharpen it; then you would probably throw it away because, after all, mom was right – you get what you pay for. You could buy a piece of jewelry that looks like a knife that is a piece of art made by a master artist; don’t drop this piece because it could become pieces and lose 50% - 100% of its value. Or you could buy a tool that is a knife that is also a piece of art made by a master artist. If you gel your hair, wear a diamond stud earring, or are otherwise gender confused – you might want to opt out for choices one and two. But if you are a man and want a knife that will work 100% of the time, something you can stake your life on if it becomes necessary; but still looks beautiful when you are not using it – then you have only one choice; and that choice is to queue up for a Jay Fisher!

--D. K.


Jay, Thank you so very much for this wonderful piece of art. It's more beautiful than I had imagined, and the jade is perfect! It's more substantial than any of the other athames I've had, and it fits wonderfully in my hand.

Bright blessings to you and yours,
--N.S.


Jay,
it was good to hear from you. I love to talk knives with someone who has knowledge and experience. A lot of what you explain I have not heard from any one else and sometimes I hear the exact opposite. Until I have done what you have though, I would be irrational to react with programmed responses. More and more it seems you are very independent and that others who have your knowledge just aren't chiming in.
I thought about all you said. You make a good point, they are talking about a distinguishing feature and not the overall quality. Plus, they are missing such a vital element that you have....namely the feedback from real users and incorporating that into the knife work. You could not make as much art and knife work as you do AND get all the experience and cutting time with knife in hand as tool that all your customers together have accumulated....
Thanks for writing,
J. O.

My response:

Hi, J.
It is true and sad how little attention is paid to the parts of this business that are important. Everyone wants to have a gimmick, a little something to separate his work (or the company's work) from the rest of the pack in order to achieve increased sales volume, while not really making anything different or better.
I believe this happens when a maker or company makes a transition from creating individual fine pieces to cranking out volume and mass. Then, the process of business goes from being about creation to being about production, sales, and accounting.
I've had numerous opportunities to go into a volume type mass production line of knives. But my mind then moves to the logical conclusion that it would have me end up sitting in an office, crunching numbers, whittling the pay scales and materials costs down, in essence: lowballing the entire operation for the cheapest investment and the highest profit margin. This is essentially the job of business accountants, bean counters, and if I have to become one, I'd just as soon quit.
See, big companies selling knives have one problem: sales. Their entire focus is on how to get more sales with less investment. They want to sell more than the other knife companies, and make more profit, while spending less, paying their employees less, and yet have knife buyers return for additional sales.
The small artists and craftsman's shop is about quality and creation. For comparison, I have no problem with sales, not one! Everything I make will sell, sooner or later. My problem is with production. Since high quality and unique creations all take time, I can only produce so many pieces. And more orders and requests weekly push back the delivery times every month.
I'm not complaining about my production bottleneck, and thankfully, neither are my clients. They want high quality and original, worthwhile investments, and I'm grateful for their patience and input, most of all.
Thanks,
Jay

Top of Page

It looks amazing!

--M.


The two knives I have from you remain in service and continue to perform excellently! I have many, many jealous colleagues who lack the patience to acquire a functional work of art. It has been a few years and my knives remain in incredible shape and continue to provide amazing service.

--M.


Kites rise against, not with the wind. No man ever worked his passage anywhere in a dead calm.

John Neal
19th century American poet

Hi Jay,
Wanted to let you know that I love the knife. Excellent workmanship! You obviously spent a great deal of time doing it. Love the fossilized Algae handle.

-M.M.


Hello Jay,
I have been using Cybele, holding Cybele, and trying to learn how it was created (specially its edge) by observing. This is a review of your knife; one of many. To give only one would be a ridiculous insult, it is not a meal that is eaten and then gone and remembered (I will probably never have a chance to remember this blade of yours and mine, because it will outlast me). While both a meal and a knife can be masterpieces, the time in which each is experienced is different. I am glad that you exist.

  • I have held it for every waking moment that I am home; holding it, waving it, running my fingers across its edge, and looking at the multi-planar surface of its edge.
  • Cut potatoes, apples, pumpkins, tomatoes into a extra fine brunoise, and spinach into a ridiculously thin chiffonade.
  • felt its edge before and after using it. Usually the edge changes (with a regular knife), but no noticeable change was found with Cybele.
  • I've held it in every way I could think of; in a pinch grip, forward grip, a glide grip (which is used mainly for delicate or hard to cut food due to its decreased traction when pressure is applied to it, such as squid, seaweed, nori, dried limes, soaked dates. These foods are common to me by the way)
  • I have tried to imbue it with as much of my energy as possible.

When I opened the FedEx package I was confused at what I was holding in my hand. Heavy...well heavier. I held it for hours before I cut anything with it, I slapped the blade against my hand, knocked it with my knuckles. I had never experienced a knife made of this steel before. Nor one made this well. Its shape still confused me though. It felt the most natural when held in a forward grip I was unsure if the handle was any good at all. I held my other knives in comparison and soon I started to dislike them. The knives I had had so much experience with and had done things so well with, were nothing in comparison to the cuts full of finesse I was making with Cybele, a knife I had never played with.

I wasn't having to accommodate for the knife, finally the knife was doing as I commanded. I will send you a video so you can see Cybele in action. I have broken down many fish, and I am waiting for a good sized opportunity to test how it will do with a large one (TUNA :) ), since its design is better suited for that. As a Chef knife it falls short because of its height, the amount of clearance in height for your fingers between the edge beginning after the choil and the belly of the knife, and its pivot point has a significantly decreased edge sharpness. Usually with a Chef's knife because it is quite large and tall you are able to easily curl your fingers and rest your proximal joints against the side of the blade. With Cybele this is not possible and the alternative is to rest the top surface of your intermediate phalanges at about 110-120 degree angle. This is not bad but it is not the most desirable for someone like me who can go a great speeds with a knife; the upward force exerted against my fingers can sting and burn from the rubbing. But, I experienced this from the up and down rubbing against my joints from larger Chef knives so the trade of is not bad.

I am a small guy, I am 5 foot 5 inches. My hands are small my fingers are not thick, and I bump or squish my fingers against the cutting board when trying to use the full length of Cybele's edge. Since Cybele has a curved blade the percentage of the actual edge that comes in contact with the surface of the cutting board is about 33%. A percentage similar to this is inherent with almost all cooking knives, but with Cybele in order to use the last third of the cutting edge the handles rear quillon needs to come down millimeters away from the cutting board. This does not leave enough room for my fingers. So, I have to remove them from the belly of the knife and switch to a glide grip (where the blade is held by the sides), again not bad; but not Great. Then, usually the Chef's knife pivot point is at the tip of the blade, in Cybele there exists two pivot points (the stinging trailing point (I think that's what its called) and the transition point/tanto blade ) The one usurping the traditional tip of a Chefs knife is that transition point; it is not as sharp as the rest of the blade. Dragging the knife along this point can cause ripping and not cutting of food stuff (though I see that the primary edge was continued farther up well into the beginning of the secondary edge).

-8/12/12
I wrote the previous paragraph thinking I understood Cybele having used it. But, cutting with it is a delightful experience. Every cut is exact, every slice is even, every dice looks like it was machine cut, and every piece of food minced has absolutely defined borders. Cybele is not the sharpest, fastest, thinnest; but overall it is the best by very very VERY far. Usually you would expect to teach the blade. Use it wear out the edge, train the edge, smooth in the middle from wear and deliciously sharp at the tip from occasional wear. The change in Cybele's edge is the least detectable that I have ever experienced. Knives to me are like nails to fingers, I can feel exactly where every part of the knife is. I have never had a blade with such a great fit. I hate hidden tang blades for this reason (but I'll hold my tongue since I have not had yours), the transference of force is not good. Often the transition and loss of force from blade, to handle, from handle to hand is to great. Even with full tang forged blades I have never had such great transference of energy. I was never a butcher, and I now am able to crack atoms and see inside them with Cybele.

It is a very releasing experience to use Cybele while cooking because the blade has tamed me, Cybele has taught me. I am incredibly fast and precise with every knife that I own, but I have never felt the need to slow down and enjoy the cut. A lot of the problems I faced with my fingers not having enough space were almost all gone because I reduced the speed of my cutting.

All my blades have "para aprender" etched on them that only I can see, Cybele is the only blade that has it physically engraved. The reason for it being written in Spanish is because of its double meaning; for the sake of learning and for learning with (meaning Cybele is a tool to be used for learning).

-9/6/12
Thank you so much, I want to continue ordering and working on the rest of my future knives with you. It is a great feeling to come home tired as hell from a 16 hour shift and go to my kitchen and cook for even longer and more enjoyable hours than ever before. I want you to do me a favor, if you will allow it; every time I purchase potential (a knife) from you I want you to put my full name on the page of every knife that I purchase from you. I am a proud owner of your work! We need to have a long talk as to how this project of mine is going to come to fruition.

thank you,
Ulises Magana


"Kochel" custom art knife, Obverse side view in hot blued, mirror polished O1 high carbon tungsten-vanadium tool steel blade, 304 stainless steel fittings, Polvadera Jasper gemstone handle, stand of American Black Walnut, Wenge, Cocobolo hardwood and Polvadera Jasper
More about this Kochel

Jay,
I was browsing the internet and found your website and I must say I am quite impressed. Now I have been a fan of ancient style Japanese swords and I found your articles on that quite interesting to say the least. I do have one question though. I actually found your site trying to find a place that could help explain to me the different grades, gauges, types, etc. of metals used. Specifically I have seen many swords stating: hand-forged and folded ASSAB-K120C powder steel blade, differentially tempered to produce an HRC60 edge, HRC40 back and a distinctive hamon. Blades are hand forged and folded from ASSAB K-120C Swedish steel. The traditional clay-tempering process is used to produce an edge hardness of HRC 60 and a spine hardness of HRC 40.
Now all that may as well be Latin to me. I just wanted to know if you knew what that meant or if it's all just fictitious to sell the swords.
Thank you for taking the time to read this e-mail.
-N.

My response:

Hello, N. Thanks for writing.
As with many factories, an unusual steel designation is confusing, to say the least, and disingenuous at the worst. Unfortunately, this is all too common with factories. The people who write the advertising copy are not craftsmen or metallurgists, so do their best to sell the product. On my frequently asked questions page, I elaborate a bit on steel types and designations, and factories often use this sales technique to give some “rare” or even “mystical” property to their steel. This particular steel is made in Sweden, and though a foreign country, not anything mystical or special about their steel making processes there.
I did some research on the particular steel mentioned, and suspect that it is a plain high carbon steel, similar to ATSM type 1085 or 1095. These are high carbon steels, often called “plain steels” as they have few major alloys present, they are not tool steels. They are easily worked and forgiving in projects such as swords. In my opinion, they are relatively cheap steels, easily attainable, and useful for forging. The word “powder” in the description is suspect; because true particle steels are much more expensive than the completed sword described would be (I’m assuming you’re talking about the SH1201 Kami katana for about $1500).
True powder technology steels (properly referred to as PARTICLE METALLURGY steels are formed from compressed particles similar to sintering, which are then heated and forged into a solid billet (chunk that becomes a sword). I believe then, their description is a misnomer, used to gather their steel under the umbrella of Crucible Particle Metallurgy steels is non-specific, and does not detail any components of the steel alloy.
Forged simply means formed, and can be with or without heat. So there are no clear details there, either.
Differentially tempering was used early in the history of sword making because the blade steels were so poor that you could not have a wear resistant blade that was also flexible. So the entire blade was hardened, then some wet clay was applied to the cutting edge, then the uncoated part of the blade was heated to temper back the hardness of the spine, making it more flexible, while the protective clay would shield the cutting edge, which remained hard. Then, a line was formed at the border of the hard and softer steel, called a hamon line. This is commonly done by quite a few knife makers presently who forge knives, because they can’t and don’t use high alloy steels in their work, and must do something to make a sword blade flexible yet hard at the cutting edge. There is also a traditional romance with forging, and guys like to keep the history alive with this type of handwork. There are some absolutely beautiful forged blades out there, and you will pay dearly for them.
I’ll say this about the advertisement’s hardness scale. If they left the spine at 40 Rc, that is way too soft, and the sword would bend at the spine, and crack on the hardened edge.
N., there is a lot of hype used out there to sell swords. Factory swords mass produced are big ticket items for factories, so they’ll do anything to try to make their products similar to historic or finely made arms by true craftsmen. I can tell you that if you were interested in a truly well made fine custom katana crafted in the traditional style with modern fine tool steels, there are several good makers who specialize in that type of work (I don’t imitate historical pieces because, frankly, they’ve already been done). a REAL katana by one of these modern masters will easily cost $15,000, at least ten times the factory sword. So the price, though high for a mass produced item, is a dead giveaway. If you’re into collecting factory swords, that’s a lot of money for a knock-off. You might ask yourself what the piece would be worth in five, ten, or twenty years, because that’s not an investment, and it will depreciate.
Thanks for the inquiry, I hope this helps.
Jay

Top of Page

Dear Mr. Fisher,
I want to say thank you for sharing your vast knowledge of knife making. I've been reading your website on and off for the past couple of months and I really appreciate you putting the information out there. It has been extremely helpful for a beginner such as myself and I am sure it will continue to be a valuable resource as I hone my skills at this wonderful craft. Again, thank you.

--Bruce Eisele


Hi, Jay.
I apologize that it's taken a little while to let you know that I received my PJLT a couple weeks ago. As always, you have created an awesome piece and a work of art. I have to say that I really like the blue G10 handle material and so does everyone else who looked at it. Thank you for adding that to my knife as it makes it unique at least until you make a few more!
Thank you again Jay. I am always proud to display or use one of your knives and I appreciate the time, care, and effort that goes into each and every one of them.
Until next time,

--D.


Here's an email from a guy that was hoping I could supply his knife club with a bunch of very nice daggers at a cheap price...

Thanks for writing back Jay. Those knifes are fantastic and no doubt worth every penny, but there are just a little out of reach of most of members in pricing. No doubt you get what you pay for and these are serious tools. We have just sent off our first order to American K*** and we are expecting to send one soon to C*** R***** so that is about the price range we are shopping in. This will definitely change over time though. What I will do though is put it up to the members and see what we can do in a few months.
thanks so much and all the best.
--M.

My response:

Thanks M., for asking.
I'm not a small factory like some of those you mentioned, and my knives are not mass or machine produced, or have parts or components farmed out. The quality of my work is high, and I have a good following and long waiting list. Right now, I've got 75 knives on the bench, every one of them unique. This is a small number for the small factories or "group" shops, but for one man, it's a bunch.
I mostly prefer to make unique, singular pieces. If you or your friends are ever interested in very fine works that appreciate in value over the years, I'd be honored if you would consider my work.
Thanks again,
Jay

Top of Page

"Kineau" Stainless damascus steel blade, hand-engraved stainless steel bolsters, jasper gemstone handle, lizard inlaid in leather sheath Hello Jay,
Just got the Kineau yesterday. Gorgeous. One of the best things about your blades is how you can't even remotely capture the soul or the feel of it in a photo. Every expectation exceeded. There's definitely some rhyme and reason behind "Greatest Living Knifemaker" title.
Thanks,

--A. D.


Got the knife today. Wow. Love the stabilized Box Elder handle and the unique file work throughout.

--B.


I will put the Imamu to good use as well on my woodland hikes and field trips (as well as a precaution to the occasional zombie attack).

--G. L.


This is a internet bulletin board (forum) post in response to a knife maker who wondered if it was possible to go full time knife making.

Hello, from a full time knifemaker. I usually don't post, but this topic hits home. This is just my opinion, about what has worked for me. I've been making knives for about 28 years, and been full time for the last 18. Yep, full time. This is absolutely how I make my living.
Most of what's been written in this post has truth, at least truth for the person writing it. Success at anything takes commitment and passion. You have to love it, or you won't keep it up. If you don't follow your passion, you might look back at your life and wonder what could have been.
Personally, I enjoy making both custom knives and also my own creations. A knife user and client is usually more field-conscious than a maker, as a maker spends his time in the shop, and the user spends it with a knife in his hand. I have learned a lot from these guys, they have the knowledge and expertise to know what they need in a fine custom knife, and I know what is available and how to make it. I have an active partnership with my clients, and learn from them in every knife. I'm still learning, after over 2000 knives made and sold.
I also take time to make my own creations, and sell those too. Each one is a learning experience, each one another milepost.
You can make a million bucks in this job, if you're willing to start a knife factory. I realized long ago that if I had to be a manager in a factory, I'd rather quit.
For some, knife making can sometimes be lonely. I work alone, but have contacts with dozens of clients at any given time. If I get the need for contact, it's surprising how smart and clear a good conversation with a fellow knife enthusiast can be. Great friendships in my life have started through knives, and will continue to.
Yes, knife making is a business. Those guys at the tables next to you are usually not your friends, they are your competition. Just show them a beautiful, fantastic elaborate work of art, and watch them cringe. I do have other knifemakers who are real friends, but they are few and precious. Incidentally, I rarely do shows anymore, because I don't have to, and because my order list is so long, it wouldn't be fair to my clients to have to wait on me while I build inventory for and attend shows.
Here are some of the most important things I have learned:

  • You must have and feed an internal fire and passion for this tradecraft and art.
  • Do the best job with the tools and materials you have.
  • Make every knife so good that you want to keep it, and you're sad to see it go.
  • Spend nearly equal amounts of time on Production, Advertising, Accounting, and Research. (most guys only want to produce)
  • Listen to your clients. They will tell you exactly what they're interested in.
  • Don't be afraid to say no to a job you're not happy with. (another client will come along) You don't have to take every job!
  • One of the biggest mistakes you can make (and I've seen this a lot) is to try to copy some other successful knifemaker's style. Develop your own style. If you copy work, all you can hope for is to copy someone else's for a cheaper price. If you can't create your own style, you should try another trade.

I've got lots of opinions, and everyone sails their boat differently. That is the beauty of this. You can take your time and make a little money, your can jump in with both feet, you can make pieces for museums... it's all up to you. No one can give you that answer.
Good luck,
Jay

Top of Page

Jay!
Received the art work today! One of the most beautiful I own. The gemstone is fantastic. I know it is extremely rare, but if you have extra, save it for one of my projects please. The steel is literally a mirror. I can understand why it is so expensive!
Yours truly,

--P.


I did get the knives and they are great! The guys loved them. Thank you again, and I appreciate all the help.

--K.


Listen to advice and accept instruction, and in the end you will be wise.

--Proverbs 19:20

The Altair's bead blasting gives the weapon a sinister look that has to be seen in person to truly appreciate. The filework is perfect, sheaths are designed to highlight the piece and there is nothing more that can be added to them!

--P.


Good evening sir,
First, I'd like apologies for my many questions. I live in the city of Ventura California and was going to sell some knives I've made at a local college flea-market. The knives are made of high quality steel, no bolsters, mirrored polish and stainless handles. I lack the skill of making bolsters, but I am working on it. The length of the knives from tip to top is 12",11",10", all with the same mechanics, but different styles. What should I set the price at, or is it a good idea at all. How did you start out?
Thanks for your consideration and time.
J.

My response:

Hello, J.
Everyone is different, and I can’t compare my own experiences selling my first knives, as that was in the early 1980s when Ronald Reagan was president!
Here’s an idea. Go to some of the knife forums here on the internet. There you will see knives for sale by everyone from beginners to experienced makers. You’ll notice that the beginner’s knives are inexpensive, and the seasoned maker’s knives are more expensive. Be ruthlessly blunt in your comparison of your knives to the beginner’s knives. Compare fit, finish, complexity, and style. Try to evaluate without your own personal passion for what you think your knives are worth. As you come up with a price, then ask yourself, “Am I willing to exchange this knife for that price, or would I just rather keep it?” If you want to sell the knives really fast, cut your price below what you think the comparative pieces are worth. You might be surprised how fast they sell.
This conversation and comparison will guide you as to what you should charge for your work. Also, for low end knives, the forums are a great place to sell as people are looking for inexpensive knives there, and that is something that was totally unavailable when I started making knives.
Jay

Top of Page

My fiance gave me the knife "Tusas" as a gift, and it is even more beautiful than it looked in the pictures. The craftsmanship is absolutely flawless, and it is obvious that it is of the highest quality with just a glance. The attention to detail is absolutely amazing, from the filework, to the finishing, to the engraving. It arrived very quickly, he tells me, and we are both extremely pleased.
Thanks so much!

--E. H.


Hi!
I just wanted to let you know that Creature EL arrived safe and sound at my house today. It's true craftsmanship, and it fits my hand very well. The balance is perfect. Hopefully, I'll never have to use it for protection... but at least I have the rudimentary knowledge of how to use it. For other purposes, well, I'm just excited to see what I can do with it!
Thank you, so much,

N. S.


Dear Sir,
I came across your site while surfing the net. I felt the need to pay my respects and sincerely congratulate you! Your knives are masterpieces! Each and every knife is more beautiful than the other! You are a real artist! And what a site! All the info one could ever want...! I am a collector and I am definitely want to buy, if I decide which one ... I want them all! Bravo!
Dr. B. N. T.

Top of Page

Hello Jay,
I was in the early stages of searching for a quality SRK and, eventually, I ended up on jayfisher.com.
Although I spent some of my younger years as a USAF forward controller, I have to admit that I've never been much of a knife enthusiast. I really enjoyed the video on your homepage, however, so I thought I'd type a few words of appreciation. Knife enthusiast or not, the underlying message of self-sufficiency in your story really resonates with me. Please keep up the good work and, even more importantly, keep spreading the word about old-world skills, problem-solving and craftsmanship -- they're all dying concepts.
By the way, I was very pleased to see that you've dedicated some of your talent and vision to military units like the USAF PJs. I trained and worked with some of them: and they clearly deserve the recognition.
Have a good one,

--B.


Thank you for all of your contributions to blade craft as well as the digital and literary world.

Yours humbly,
Aaron


Sheaths and new knife turned out perfect!!!!

--S.


Mr. Fisher,
I am an amateur blacksmith and engineering student hoping to break into knife making. Your website has provided me with more truly useful information than not only any other source, but ALL other sources that I have researched. I just wanted to say thank you; thank you for taking the time to get to the real point and cutting out the fluff. Thank you for putting your reputation on the line in a world where the vast majority of people don't take responsibility for their actions. Thank you.
D.M.

My response:

Hello, D. Thanks for writing.
I'm glad my site has been an inspiration for you. The modern metalworker is not limited to primitive ways of construction, though there are those who limit themselves to this past. It may be romantic to hold onto the hyperbole and mystery of the cutting edge, but real clients nowadays simply want the best knife that can be made for their dollar.
I believe that there should be no mystery about that!
Thanks,
Jay

Top of Page

Jay,
Thanks for the new pictures. The knife looks absolutely stunning, and I can’t wait to see it in person! I think of all the knife designs you have, this is the one I like the most. It took me a long time to narrow down which design I wanted, and even then I could not pick just 1. (that’s why I ended up ordering 2!) After seeing your website, I knew you were the guy I wanted to make my knife! I have never seen the quality and scope of knives that you have listed on you site and CD-rom. At first I thought your knives were too expensive (for me); but the more I learned about fine knives, the more I have come to realize that a Jay Fisher custom knife is actually very reasonably priced. I have bought other knives that are close in price to yours; but the custom knives that I have received from you, are superior in every way. Not to mention that I was personally involved in every aspect of the creation of the knife (choosing the design, handle type, blade material, blade finish, embellishments and so on). I just wanted to sincerely thank you for creating a set of knives that I am sure to enjoy for a lifetime!

After he recieved his knife:

"Jungle Bowie" 440C high chromium stainless tool steel blade, 304 stainless steel bolsters, Indian Green Moss Agate gemstone handle, ostrich leg skin inlaid in leather sheath "Jungle Bowie" edgework, filework (rolling blocks) "Jungle Bowie" fine sheath inlaid with ostrich leg skin in 9 -10 oz. leather shoulder

Just a quick note to let you know that I received the knife today. It came out even better than I expected – which after seeing your previous work is hard to do! The mirror finish on the blade is absolutely perfect and the sheath is simply amazing. I took the knife to a friends house and he was impressed as well. I left one of your CD Roms with him to see if we can hook him on your work! Thank you for a beautiful knife. It is now the centerpiece of my collection.

--A. V.


Mr. Fisher, Is it possible you could make me a knife/art piece? I would like a PJLT. If possible, the handle done in a obsidian snowflake 1 or 4 or orbicular jasper green and gold. Beautiful stones.
What can I do to help?
Thank you.
J. M.

My response:

Hi, J. Thanks for writing and thanks for your interest in my work.
The PJLT is a great knife, and though I make plenty of them for military use in micarta, it’s always nice to make one with a fine gemstone handle.
The final price quote of such a knife depends on materials, finish, embellishment, and accessories (sheath). To give you a ball park idea, a PJLT with mirror finished 440C high chromium stainless tool steel blade, 304 stainless steel bolsters, a standard gemstone handle (like you mentioned), and a fine hand-tooled leather or tension fit kydex sheath would start at $895.00. Upgrade it to a locking stainless steel sheath or exotic inlay sheath and the price would be $1095.00.
Right now, my orders are taking about a year, and all that is required is a $100 deposit, with the balance due on completion.
Please let me know if this is within your budget, and you would like to discuss any specifics.
Thanks again,
Jay

Top of Page

Hi Jay, received Reaper today. AWESOME!!!!!!!!! very cool, thanks.

--R.A.


Hi Jay
...what a beautiful piece of work. Much heavier in the hand than I expected and actually much larger too for some reason. That is one serious knife. I love the filework on it, really makes the whole thing pop.

--T.


Jay,
The knife arrived and looks great!
Take care and thanks,

--J.


Hello,
I read through your "What I do and Don't Do" page, and I didn't see my question listed. I am in the process of leaning to make knives and swords, but have hit a snag. I bought some 2" thick steel to make my own pommel, but my bandsaw wants nothing to do with cutting that. Would you make a pommel if I provided a sketch with dimensions? Thanks so much,
C. G.

My response:

Hello, C. G.
I have to smile, you’ve got me on that one. I tried to address every inquiry on my “What I do” page, but I evidently missed that one! I’m sorry, I only work on my own knives.
It sounds like you have a problem cutting your 2” thick steel. Could it be hardened already? That would explain why it won’t cut. Also, in cutting metal that thick, you need to use a new low count tooth blade (like a 10 tpi) and run it faster than stainless steel. Even then the cutting will be very slow and tedious… and wax lube can help.
Hope this helps,
Jay

Top of Page

...Artemis, branded with Jay's mark, is destined to endure through generations. A great chef's knife is not a tool, but more an extension of a chef's hand; Jay's immortality transitions through Artemis into culinary artistry; indulging thousands of palates by crafting countless feasts.

--E. S.


Great souls have wills; feeble ones have only wishes.

Chinese proverb

Dear Mr. Fisher,
I am in utter awe of your work. I'm a 17 year old aspiring knife maker in northern VA. I stumbled across your site and immediately was hooked on the pictures. It was all I could do to pull myself away from the knives and see if you offered training or anything of the like. I quickly found you didn't, and even though a bit disappointed, I very much understand why.
I wanted to simply let you know that you have quickly become a hero in knife making for me. If one day I can become close to making a knife half as beautiful as the worst of yours, I would be extremely proud. Perhaps one day I can order a knife from you.
I read the "Please, Serious knife purchase inquiries only" but I thought, that perhaps after a long hard days work, the knowledge that your work is truly appreciated and an utterly amazing inspiration to someone could lighten your day. I do not wish to waste your time any longer. Forgive me for taking this much. I hope you and your family have wonderful days, and that your business prospers.

Sincerely,
Andrew Jablonski


The knife is gorgeous; the vine pattern file work appears alive, the hawk's beak quillon, the exquisite and balanced blade grinds extending to the devastating tip, the mirror polish, and the stunning gemstone handles, the knife possesses a spirit brought alive by your mastery over the materials. You can see it in the great pictures, however, they do neither the sheath nor the knife justice! Holding it my hand, feeling it's spirit, and seeing it with my own eyes, absolutely incredible, the handle sticks to my hand, a perfect fit.
Thank you Jay!

--T. S.


"Macha Navigator" display, presentation, storage case interior view in American Red Oak, Exotic Redheart, Poplar, Mookaite Jasper gemstone
More about this Macha Navigator

Hello Jay! The "Argyre" arrived and proves that you are the best craftsman/artist that is available to anyone who has a dream of a superb knife.
Yours truly,

--P. K.


Hello Jay, sorry for not getting back to you sooner. The knife is unbelievable!!!!! It was well worth the money and wait. You are a true artist and Master Craftsman. I am the envy of all my friends.......
Thanks again,
Tony


Mr. Fisher,
I'm interested in the availability, and purchase of, one of your Tactical blades. I've looked over your basic pricing info, as well as the 'tactical knives' section of your website. Word is you're THE man, and this is THE field blade to get, so here I am. The description from your website of the blade I'm interested in getting is as follows:
United States Air Force Pararescue LighT: The PJLT
Mirror finished 440C high chromium martensitic stainless tool steel,
with full filework, fully tapered tang, half-blade length swage,
and 2" of positive rip tooth serrations.
Bolster: bead blasted 304 stainless steel, dovetailed,
fiberglass linen reinforce micarta handle,
with stainless steel pins and lanyard liner.
Sheath: double thickness kydex hot-formed over aluminum welt frame, secured with steel Chicago screws and aluminum belt loops.
I appreciate your time and consideration, sir.
Regards,
J.W.M.

My response:

The PJLT is a very good knife, proven in combat and rescue. It is my most popular CSAR knife. One like you described would be $475.00 complete. I make it a bit different than the posting you copied in this email, and that is with an additional rear bolster, for greater strength in the handle.
My backlog is about a year, but I often can move military clients up faster in the list, so I may be able to get it to you sooner.
Let me know.
Thanks,
Jay

Please do not use these emails as comparisons for current prices; the emails are dated.

Top of Page

Jay,
I just wanted you to know that I got back from a four day trip and was pleasantly surprised to see that the knife had arrived. The pictures that you sent do no justice to your craftsmanship, it is outrageous. I will be very proud to be able to present my son with this knife at his graduation from boot camp. The locking sheath is well made and will keep the knife very secure, again your dedication to detail is shown in everything that you do. I hope he will never have to use it defensively, but if need be, I know it will not fail him. Once again, my prayers go out to your son, your family, and all that are serving this great country of ours.
God Bless America.
Thanks again,

--C. D.


Hi Jay,
Cyele arrived safely and once again, your work exceeds my wildest expectations. The knife is a work of art. The gemstone handle is without peer. The fit, finish, and balance could not be better. It is the perfect compliment to my Vega chef's knife, just as you anticipated and predicted. Thanks again!
--D. E.


Jay,
I'd like to buy a Reaper push dagger. I assume this design is a DAGGER; I want symmetrical double edged, double sided blade. What finishes are available other than black or stainless? It appears from the one picture that there is an inset in micarta or something similar. I'd like a red or red and black insert of micarta, G-10, dymondwood, or something similar. Finally, I'd like a sheath, preferably leather since kydex scratches. What's the cost, payment terms, and delivery prospects? --C. S.

My response:

Hello, C. Thanks for writing, and thanks for your interest in the Grim Reaper.
One of the best steels to use for this knife if a keen edge is needed, and being able to field-sharpen the knife is necessary, would be O-1 high carbon tungsten-vanadium alloy tool steel. That is what the two reapers on my site are made of, and they have both performed great, one even in combat in Iraq. The only limitation of O-1 is that it has to be waxed and kept dry, or it will rust. Corrosion can be inhibited somewhat by bluing , just like a blued firearm. Most reapers on my site have been blued.
A reaper similar to those pictured would start at $1200.00 and go up from there depending on materials, finish, embellishment, and accessories. Currently, my orders are taking 18 months to two years, due to the large amount of custom knife orders.
Please let me know if you would like to discuss details, or order this or any other fine custom knife.
Thanks again,
Jay

Top of Page

Jay,
Friday night I came home to a package from you. When I opened it I was amazed at how it turned out. It is even better than I had hoped for. My wife is even impressed and normally she could care less about my outdoor/hunting goodies. The file work on the spine gives it a very nice touch of class. The blade shape, blade contour, handle shape and size are all absolutely as I dreamed. The balance is so good it feels like an extension of my hand. I must admit that even though it was built exactly as I lined out the blade was a litter bigger than expected. That is a good sized chunk of steel. But it will be perfect for my uses. It has already pulled duty cutting open cardboard boxes and other stuff. I am always looking for an excuse to use it. I am going to have to get a new diamond stone to sharpen it though. My extra hard black Arkansas stone wouldn't touch the edge to dress it up after all the cutting I have done with it. I guess a fine diamond stone is in order.
Even though this is a work of art it will see use everyday being carried on my belt in uniform. As a soldier and hunter who has carried a lot of knives over the years I have never owned a blade like this. I feel very secure in knowing that if I am ever forced into a situation where this knife is called into service to pull my backside out of a bind it will perform no matter what I ask of it. This is the first knife I have ever felt capable of meeting those demands. On top of being an incredible working tool it is incredibly beautiful too.
My friend Steve who saw it Friday night about had a coronary when I used it to cut open some boxes with it. He feels I should put it on a shelf and just fondle it occasionally. When I told him it was going to be my daily carry knife he actually choked and spewed Coke all over the place. That alone made it all worth it. I cant wait to take it to work and show it off. Thanks again for making me the knife of my dreams a reality.

--SGT W. B.


Nature has made occupation a necessity to us; society makes it a duty; habit may make it a pleasure.

--Edward Capelle
18th century English critic

"Lycaon" handmade custom broadsword, mounted view  in 440C high chromium stainless steel blade, cast bronze fittings, guayabillo hardwood and nephrite jade gemstone handle, obsidian pommel, lauan hardwood scabbard with cast bronze chape, display board of ebonized red oak, steel, black suede, American Black Walnut, engraved black lacquered brass
More about this Lycaon

Congratulations Jay.
It is rather refreshing to come across inspired and inspiring people like you. Many thanks for sharing your thoughts, knowledge, and expertise.

--J. G.
Portugal


Jay, I received the Cygnus-Horrocks yesterday. Once again, you've created a knife that exemplifies your mastery in bladed weaponry and artistic greatness! To hold this knife and to look upon it, reveals itself to me as a most formidable weapon with its beautiful steel blade, hand-carved bolsters, and green, green Aventurine gemstone. It is a great addition to my Jay Fisher Knife Collection! THANKS!
--D.T.


Dear Mr. Fisher,
I don't want to eat up too much of your time, but I just wanted to express my appreciation for your work. I was browsing through "Blade" magazine, and as usual I was looking at the knives, and generally admiring the craftsmanship, and then I came across the "Raptor Karambit". Having cruised through many a Blade mag. I've seen my share of art knives, and unique knives. I've even been fortunate enough to have handled a few custom pieces.
And still your knife stopped me cold. The Raptor is an amazing piece, the shape of the knife is exquisite, something about it literally sends shivers up and down my spine, and the handle is so perfect, the deep curves of the grip really feel complimentary to the style of the blade. You've inspired me to try my hand at that style of knife, I've never even attempted a sickle type blade, working mostly with a japanese style in mind.
All in all, without talking your ear off too much, I just wanted to express my appreciation for an inspiring blade. And to offer my congratulations (for what its worth coming from an amateur) on a truly moving piece of work. I wish you the best in your future endeavors, and a happy holiday season. Thank you for contributing the "Raptor" as well as your other works to the knife community.
Sincerely,
B.C.

My response:

Hi, B. Thanks for writing.
I wasn't aware that Blade had featured the "Raptor" until last night when I got a late call from a New Yorker who had seen it and cruised my site. I think it will generate a lot of interest, as it is a real, usable tactical knife that is very finely made, yet steps into the art knife category.
Thanks,
Jay

Top of Page

"Oceana" mirror finished 440C high chromium stainless tool steel blade, 304 stainless steel bolsters, Turitella Agate gemstone handle, locking kydex, aluminum, and stainless steel waterproof sheath

Hello Jay;
I received my knife yesterday, and I am astounded at the workmanship and beauty of my knife! Are you sure you charged me enough? The file work is the one touch that really sets it off.....I'm still trying to figure out just "how did Jay do that!?" I do feel bad it caused you a few stitches...I can tell you one thing....it is dangerous to grab it without clear intent! You were not just talking when you said it had aggressive points everywhere:) It is a piece I will treasure, and even though it should be put under glass, I will carry it on my diving and flying adventures.
Your friend,

--M. B.


Dear Mr. Fisher,
I just finished reading your new article about heat treating and cryogenic process. WOW, thank you very much for sharing such lots of information and knowledge. Reading it sure does brings back old memories of college times, as metallurgy is one thing I studied back in college. The way you describe it amazes me; you do it as like you are a lecturer. Very clear explanation, so easy to understand.
Thank you for sharing, and keep up the good work.

--Hendrik Rinaldi


Jay,
I know you are busier than heck. I read your do and don't page and some of the pricing information. My basic question is, "Roughly, how long would a custom service/tactical knife take with your current orders in place?". I know things change and such, I'm still in the process of trying to figure out exactly what I want/need. A lot of reading to do, yet! :)
Thanks for any help,
C.

My response:

Hi, C.
You caught me at my computer, so here goes:
My time of completion really depends on the piece. If it’s a military or tactical unit, I do those regularly, and try to have a couple in every batch. Of course, the ones I’m working on now sold before completion… so the early bird gets the worm.
Worst case: 8 months. I know… ouch. But I’m working on 75 knives right now. Let me know what you’re interested in, I might have one on the way!
Thanks,
Jay

Top of Page


Jay,
I've owned on of your knives for about 5 years now. It was purchased at a fair in New Mexico, and given to me as a gift. It's a small drop-point skinner, and a beautiful piece of work! Not only is it a piece of art, it is extremely functional and holds a great edge. I have put it to the test quite a few times in the past years, and it has performed flawlessly in every occasion. I'm proud to use it and proud to show it off as well.
That little knife is perfect for skinning deer and hogs though. Perfectly balanced, complete control. I just wanted to say thanks for a great product. Thanks for a great knife!
Very Respectfully,

Phil Parker
Edmond, OK


Mr. Fisher,
All I can say is WOW!
Calling your work beautiful doesn't seem to do it justice.  I've caught myself going back to the picture link over and over again.   The Jasper you used is remarkable, and the other finishing touches compliments the entire knife as a whole.  I can only imagine how good it looks in person, and will probably look even better in my hand.  Thank you very much for taking the time to create this knife for me.
Again, awesome work from a talented artist!!

Best Regards,
C.

Later:
It's a gorgeous knife.  Looks even better in my hand.  The Jasper really stands out.


Hi Jay -
I've attached a .JPG file for the design for a new custom piece taken from your “Kapteyn” design and inspired by the Nebula Stone material you recently received.
Vision: From end to end the piece flows like a stream of stardust within a deep space nebula. The black Nebula handle visually compliments a black center within the blade (material of your choice) which fades from the base to tip. The mirror finished 440c blade (around the black center) matches polished stainless bolsters at both ends, and the whole piece is brought together by polished, exposed full tang.
Details:
- Polished Nedula Stone Handle
- Exposed full tang (no file work pattern unless you think it wouldn't detract from a fluid look and feel)
- 304 Austenitic Stainless Steel bolsters, mirror polished (or recommended alternative)
- Mirror finished 440c Blade
- Black blade center, starting from handle and fading to tip (any metal, material or finish determined to both look the best and be cost effective)
- Special Notation: Please don’t use any Nickel as I’m allergic to it. Thanks.
- 13 to 14 inches in total length (whichever you recommend)
- Proportions similar to your Kapteyn design (as shown on attached file), or as suggested.
- Perhaps a top-edge on the last 2 inches of the blade
My budget for this piece is $1,000 to $1,250. If you determine the completed piece as described is either above or below my budget, please recommend how we can modify the piece to get it within range. I’ll send the $100 custom design fee at your direction. My birthday is April 19th and receiving it by then would be great, and if you can’t I understand.
Discovering your website has really brought out a passion for your type of work, and I look forward to your feedback. Thank you in advance.
Best Regards,
A. N.

My response:

Hello, A. Thanks for writing and thanks for your kind words about my work and my site.
I appreciate the thought you’ve put in to the design and idea, but I’m afraid I could not adjust it to fit your budget and still do the knife justice. With your description, I would quote it at over $6000.00. Also, my delivery times are running at about 48 months now due to a huge list of orders.
Thanks again.
Jay

Top of Page

I believe that it is better to tell the truth than a lie. I believe that it is better to be free than be a slave. And I believe it is better to know than be ignorant.

H. L. Mencken
American Author

"Eridanus" in 440C high chromium stainless steel blade, hand-engraved 304 stainless steel bolsters, Sunset Jasper gemstone handle, brown lizard skin inlaid in hand-carved leather sheath

Jay,
the one thing you still can't get off of the internet is the way a knife feels. I wish anyone thinking of buying a Jay Fisher knife could hold Eridanus in their hands for just a few moments. Then there would be no doubt that buying a knife from Jay is the right thing to do. I've bought some other blades of the internet that photographed well, but when you got hold of them, they didn't feel or handle like much. Eridanus just feels like it belongs in your hand. You can get a knife anywhere, but this is a work of art.
Thanks Jay.

Oh and by the way the sheath alone is worth the price.

--Rick Stuart


Testimonials from Clients Purchasing our Collaborative Knives

It's important to include testimonials from our clients who have purchased collaborative knives, knives made by other family makers and me. I've trained these guys in the past, so this reflects upon the whole studio, process and art. The family makers are James Beauchamp, Rusty Russom, and Etienne Beauchamp. These guys have been great students, and I appreciate the time and effort they took to learn about knifemaking.

Jay,
I received the knife, it is FANTASTIC!!! It is perfect!!! Other thing is the sheath is really excellent, no worry about it coming loose at all. Thank you so much and please pass my thanks on to James!!!
Thank you so much!
Chris P.

Hi Jay,
I wanted to let you know the knife arrived yesterday. Wow! Eliot is going to love it! Thank you.

--M. L.


Hi Jay,
The knife arrived today and I am immensely pleased with results. The photos really don't do it justice. The finish is exactly what I was looking for and the balance is great. The sheath locking device works brilliantly; all in all a great piece of work.
I am already looking forward to the next knife, which will be a little more adventurous in terms of style and finish.
Outstanding Work
Kind Regards,

--S.


...I am impressed with the tight fit of the bolster to the tang, looks like it’s been properly surface ground on all of the mating faces. The attention to detail on the dovetail fit , on the scales is fantastic and release on the sheath allows for use with gloves. If this the caliber of work that James is turning out he has every right to be proud, it is a thing of beauty . It’s the attention to detail for me, that is the difference between good knife and excellent one . I will have a chance to give a work out over the next couple months, but it looks and feels like it will definitely outlast me.
I have to admit to a little jealousy when I see the standard of work you produce.
Kind Regards

--S.


Wow! The knife looks great!

--B.


Guys, the knife and sheath are everything I anticipated and then some! The amazing grip, symmetry, balance and smooth lines complete the quality of the detailed materials that you were able to use in creating this knife. That sheath is unreal; I repeatedly said to my wife that I haven’t seen anything like it. The mechanism is so smooth! Thank you for letting me own a piece of your art and craftsmanship. Maybe after a few, ok a lot, of gift giving occasions transpire I can suggest another knife with a gemstone handle?
THANKS!

H.


Jay,
I can’t tell you the happiness and the pure joy that you brought me; the engraving that I asked for was very simple, yet you went the extra mile to make it a true work of art!
I can’t thank James and you enough for the outstanding work that you have done – I will wear this knife with pride and every time I strap it on will think of you and James and the work and craftsmanship that went into the making of it.
Thank you for your work and your dedication that you put into the knives that are destined for the Soldiers, Marines, Airmen and Civilians that protect this great country.
My very best regards,
Tommy “Mbogo” Allen


Jay,
I picked up the knife this morning, and it is exactly what I was looking for. Thanks so much, and do be sure to tell the same to James.

--G.


Knife looks great; you guys are true masters of your trade!

--M


I love the knife. I'm sure it won't be the last one I order.
Thanks again.

-M. W.

Rusty and Jay,
When I first saw my knife in person I was blown away, it is exactly what I needed. It's sturdy, strong, sharper than a razor and holds an edge perfectly. It is the all around knife that in my nearly two decades as a chef I have never before had the pleasure of owning. Words cannot express how pleased I am. You are true craftsmen. I'm truly honored to possess this amazing piece of art. I can't wait to start another project with you both in the very near future.
Thank you.

--D. K



Jay (and Rusty),
I received my knife yesterday and it is fantastic. Thank you again for putting such effort and time into it.

--B.


Jay,
Thank you very much; they look great!

E.


Yesterday my buddy took his Grady White 60 miles off the coast to Blue Fin Tuna Fish (something very difficult for U to do in N. M.). He caught a 94# Blue Fin Tuna. He brought it to me to butcher. I as U know have a new Chef’s knife! It performed all the tasks of Gutting, skinning, deboning, and trimming without requiring even one sharpening.
Wow!

--B. M.


Jay thank you they are so great. My chef friends so hate me.

--J.K.


Jay:
Just received everything. I could not be more pleased or proud to present this amazing piece of combat art to Hector. James and your work is impeccable, the blade balance fantastic, the sheath incredible, and the presentation box a perfect addition. Its been an honor to work with you on this project. Looking forward to the next one.

--J.


She is a beauty! I almost don't want to use it for work purposes for fear of marring the finish! It has a nice weight to it and fits into my smallish hands very well! Easily worth every dime. I look forward to ordering a kitchen set in the near future! Thanks again.

-J


Etienne and Jay,
The Mountain Creature EL arrived and it looks great! Etienne you did a fantastic job under Jay's tutelage. The handle fits my hand perfectly and the sheath allows for zero movement and zero noise. Your website makes some big claims and the finished product follows through with them perfectly. I hope you and your family have a fantastic Christmas and a prosperous New Year. Hopefully, I'll have another project for the both of you to work on in 2014.
Warm regards,

A. M.


Jay,
I just received the knife and it is fantastic.
Thank you.

--Michael


Jay,
Mercury arrived today. I would like to explain how impressed I am with your (and Rusty's) work, but I feel actions speak louder than words. You will hear from me again to finalize the second commission (the Hortensius model) by the end of the week.
Thank you for being the Knife Maker that America needs,

--R. K.


Jay and James, the knife is brilliant, the geometry, weight, feel, look, finish, the pride that goes into making something like this shines through and you guys should be extremely proud of the fine work you do, in an age of quick satisfaction and mass production it's a honor to own something so well-crafted by hand.
Thanks again, it really is a work of art.

--M.


We received the knife. It looked awesome.

--B.


Jay,
I just received the Kapteyn. You and Rusty did an amazing job! The knife has great balance and weight. The black palm scales look so unique and feel natural in the grip. Filings and serrations look great. A stunning and functional piece. Thank you very much!

--N.



Thank You!

... for being here. I'll add to this page from time to time, so please check back.

"Sadr" liner lock folding knife: 440C high chromium stainless steel blade, hand-engraved 304 stainless steel bolsters, jasper gemstone handle, anodized titanium liners, granite case
More about this Sadr

XHTML 1.0 Validated, Compliant, Link Checked, and CSS Level 2.1 Validated through W3C, the World Wide Web Consortium
Main Purchase Tactical Specific Types Technical More
Home Page Where's My Knife, Jay? Current Tactical Knives for Sale The Awe of the Blade Knife Patterns My Photography
Website Overview Current Knives for Sale Tactical, Combat Knife Portal Museum Pieces Knife Pattern Alphabetic List Photographic Services
My Mission My Knife Prices All Tactical, Combat Knives Investment, Collector's Knives Copyright and Knives Photographic Images
The Finest Knives and You How To Order Counterterrorism Knives Daggers Knife Anatomy  
Featured Knives: Page One Purchase Finished Knives  Professional, Military Commemoratives Swords Custom Knives  
Featured Knives: Page Two Order Custom Knives USAF Pararescue Knives Folding Knives Modern Knifemaking Technology My Writing
Featured Knives: Page Three Knife Sales Policy USAF Pararescue "PJ- Light" Chef's Knives Factory vs. Handmade Knives First Novel
Featured Knives: Older/Early Bank Transfers  27th Air Force Special Operations  Food Safety, Kitchen, Chef's Knives Six Distinctions of Fine Knives Second Novel
Email Jay Fisher Custom Knife Design Fee Khukris: Combat, Survival, Art Hunting Knives Knife Styles Knife Book
Contact, Locate Jay Fisher Delivery Times Serrations Working Knives Jay's Internet Stats  
FAQs My Shipping Method Grip Styles, Hand Sizing Khukris The 3000th Term Videos
Current, Recent Works, Events Business of Knifemaking Concealed Carry and Knives Skeletonized Knives Best Knife Information and Learning About Knives  
Client's News and Info   Military Knife Care Serrations Cities of the Knife Links
Who Is Jay Fisher?   The Best Combat Locking Sheath Knife Sheaths Knife Maker's Marks  
Testimonials, Letters and Emails     Knife Stands and Cases How to Care for Custom Knives Site Table of Contents
Top 22 Reasons to Buy   Tactical Knife Sheath Accessories Handles, Bolsters, Guards Knife Making Instruction  
My Knifemaking History   Loops, Plates, Straps Knife Handles: Gemstone Larger Monitors and Knife Photos  
What I Do And Don't Do    Belt Loop Extenders-UBLX, EXBLX Gemstone Alphabetic List New Materials  
CD ROM Archive   Independent Lamp Accessory-LIMA Knife Handles: Woods Knife Shop/Studio, Page 1  
Publications, Publicity   Universal Main Lamp Holder-HULA Knife Handles: Horn, Bone, Ivory Knife Shop/Studio, Page 2  
My Curriculum Vitae   Sternum Harness Knife Handles: Manmade Materials    
Funny Letters and Emails, Pg. 1 Blades and Steels Sharpeners, Lanyards Knife Embellishment     
Funny Letters and Emails, Pg. 2 Blades Bags, Cases, Duffles, Gear    
Funny Letters and Emails, Pg. 3 Knife Blade Testing Modular Sheath Systems  
Funny Letters and Emails, Pg. 4 440C: A Love/Hate Affair PSD Principle Security Detail Sheaths      
Funny Letters and Emails, Pg. 5 ATS-34: Chrome/Moly Tough
Funny Letters and Emails, Pg. 6 D2: Wear Resistance King        
The Curious Case of the "Sandia" O1: Oil Hardened Blued Beauty        
The Sword, the Veil, the Legend Elasticity, Stiffness, Stress,
and Strain in Knife Blades
   
Professional Knife Consultant Heat Treating and
Cryogenic Processing of
Knife Blade Steels